Holiday Workshop 120 volt Carousel Repair
HTML-код
- Опубликовано: 10 фев 2025
- Repairing a 120 volt carousel that the synchronous motor went out on.
At the end of the video the animals are going backwards, that was fixed after filming, didn't realize it at the time. The motor reverses when it gets a load on it, opened base and put a load on it to reverse its direction.
Lights where purchased and replaced as well.
120 Volt motor: amzn.to/3qGrVHM
Solder station with heat pen: amzn.to/3AsTs40
Facebook:
/ randomjchannel
RUclips:
• 2020 Halloween House G...
Twitter:
/ channel_junk
Gmail:
RandomJChannel@Gmail.com
Tik-Tok:
tiktok.com/@randomjchannel
Etsy:
www.etsy.com/s...
Tee Spring:
teespring.com/...
I have one just like that 1. Thank you for the video. It's the motor that don't turn.
They make an indoor 24 volt AC version of this carousel also. Thanks for the video! Disassembly was the same for the indoor version.
Good to see you back my friend love your videos
Thanks random online person! Also I've got a plastic thing that looks like a lid a red wire loose and a black one with alot of silver on the end of it any ideas?
I have one. Motor works just fine, I need to change 2 bulbs. My question is: how the heck do I clean it up after years of dust?
Rubbing alcohol is best, 70% or higher with a cotton rag to reduce the chance of scratches.
@@RandomJunkChannel thank you! I used a soft dry tooth brush and just kind of brushed the dust off for now. Do you have recommendations for lightbulbs? I’ve looked everywhere online for what it originally took.. no luck so far. TYIA!
It has been awhile since I worked on this piece. Can you send a picture of the light bulb to randomjchannel@gmail.com and I can see what I can find
Awesome video. How do i change the light bulbs. Thanks
Also music just stopped playing 😢 but carousel spins just fine
You should be able to reach through the slats in the plastic, but if not, you would need to disassemble it to access the top
Either a wire broke in the base or a component on the board failed, the base would need to be opened to inspect.
How do I shut the horrible music off yet have it turn and flash? My husband retrieved mine out of storage. He said, I think it looks the same but I'm not sure it sounds the same. We turned it on. It sounded just as horrible as it always has. Please, how do I turn off the music?
Without a volume knob/wheel, you would have to open it far enough to cut the wire going to the speaker to stop the sound.
The animals are going backwards
Correct. It was fixed off camera once realized.
My motor works fine but my lights and music stopped working. Any suggestions on how to fix that
Check the wires and connections for a bad or broken connection.
I have this same exact carousel. Picked it up on a online auction. It's in great condition. It looked like it took batteries because of the big motor box cover. Unfortunately, it doesn't have the cord. Can you please recommend (or even send a link for) a replacement cord?
The sticker by the input hole says
AC 24V/625mA for indoor use only
Subscribed to your channel! Watching this video really helped me better understand the inner workings of a motorized piece. You explain things very well. Thank you, and I hope you can help me. Would like to see it running before Christmas Eve. HAHA😊
Here is a link to a 24vac power supply. I don't know what end you need on it to plug it into the carousel but the end can be cut off and wired into the carousel or a new end could be put on.
www.amazon.com/Reliapro-ADU240100D5531-Adapter-Transformer-Straight/dp/B00B8866E2/ref=sr_1_7?crid=36C9XLC9DX64D&dib=eyJ2IjoiMSJ9.9IDc55tC_0_cSTH900ww3fdhE6IlOX5GEZbbvKPDm065V5SDhuGXGBCaJ7XHeaMk06X_xCn8n0dRnWdAV9JDAonfZVbE-EvYD9vPRpCrC-XAH5hifsEq2rKmKdvToRrxz2tN1XqkWaEvrSJWp7tJtqK8E4jgFSQofWA4XyiVgacZZ8NYF3cTfeYDyJfOnrHidu3gLqTeOmxs4jZDHH9tutD1BBcKbz4kEFWqHJBiG95Bon8blDKDu_kcPnq7GhnxugGbBWdvAE210oJNstq1fPfWKvlTNeW1iFwVn2WWC2E.PITCXtGJXeq7N4Xmchyqwlojb5cMWg4J_1QDphthABs&dib_tag=se&keywords=24+vac+power+supply&qid=1733915976&sprefix=24+vac+%2Caps%2C165&sr=8-7
Thanks for the video, I changed my motor and it works but is going backwards. How do you put a load on it to reverse directions please?
If your motor is a CW/CCW, stop it with you hand, it should reverse. If it is only one or the other, you can't. Either change the motor or you can, in some cases, turn the characters around.
@@RandomJunkChannel Thank you, I bought the same motor recommended in video so I'll try and stop it by hand. Appreciate the reply.
Lol , how you don’t know it’s spinning backwards 🤷🏻♂️🤷🏻♂️🤷🏻♂️🤷🏻♂️😂😂😂😂🤦🏻♂️🤦🏻♂️
Fixed it after the video was done, sometimes it slips by but I try to watch which way they rotate.
My lights don’t work, I changed the bulbs still not working
Sounds like a wire may have broke. You would have to open it to see if a wire on the lighting side has broke in the base or at the first light socket were the wire split between them,
@ thank
Thank you so much