How to Replace Master Power Window Switch 02-08 Audi A4
HTML-код
- Опубликовано: 25 авг 2024
- Buy Now!
New Master Power Window Switch from 1AAuto.com 1aau.to/ia/1AWE...
1A Auto shows you how to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch. This video is applicable to the 02, 03, 04, 05, 06, 07, 08 Audi A4
This process should be similar on the following vehicles:
2004 Audi A4
2005 Audi A4
2006 Audi A4
2007 Audi A4
2008 Audi A4
2009 Audi A4
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/okq/1AX...
• Phillips Head Screwdriver 1aau.to/okq/1AX...
• T20 Driver 1aau.to/obG/1AX...
• Pick 1aau.to/ob2/1AX...
Subscribe: / @1aauto
Check out our playlist:
Audi A4 2004-09 3rd Gen (B7): • Audi A4 2004-09 3rd Ge...
Window Switches: • Window Switches
For More Info visit us at 1aau.to/h/vI/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Your video was a saviour, many thanks. I found you can access and remove switch without needing to remove the door handle with the T20 etc, just a bit tighter space to work with but comes out no problem. However, after swapping out the switches with a new one, I still found the fault with my driver window, along with issues with all four other windows remained. Next, I opened and exposed the door wiring loom between door and body, unclipped rubber boot and wiring loom and found a very fine red/white wire that had a clean break, reconnected and that fixed it. So along with the switch going, a common problem is the wires breaking within that rubber door loom that bridges door to body.
Couple of points.
2:00 First, this maybe model specific, but there's one more Philips screw right at the bottom that will prevent removal if not undone. Plus mine had 4 latches to pull out near each corner, wasn't quite as simple as a gentle pull.
3:40, 6 extra screws, not 3, which you can see in next scene have also been removed.
It might be a bit pedantic but some literally following this may find this helpful.
4:40 if your having trouble getting the switch out, as there's also 2 tabs on the back which can be tricky to undo, due to reach, but you can remove the panel that houses the switch from the door handle, no screws or tabs just need to pry it away from 4 points.
+7EimaJ7 Thanks for the feedback!
Perfect instructions Much appreciated...was a breeze to do with your detailed video and commentary
I went thru the exact procedure to replace the broken switch on my wife's '07 A4. Pulling out the metal trim panel was a neat trick I wouldn't have known about. Thanks to you, youtube and other videos like this made it quick and easy. Just wish they made those silly plastic clips that break off so easily with better plastic.
I just followed the instructions in this video and changed my driver side window panel without any issues.
Thank you for your step by step instructions
This kind of people making a difference by sharing their knowledge.
doing god's work with this great video. will be replacing mine soon and wouldn't have been able to without this video. Thank you!
Outstanding guide, made the installation of a new window switch a piece of cake on my 05 A4 B6.
Thank you. I needed to replace and your example was spot on. Took me 1 hour and I'm not a technical expert.
Just the video I needed, thanks! I had trouble unplugging the wire harness to the switch, so I popped the switch out first and then unplugged it. Awesome vid!
+dfalise1 Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA+Comment&
Great video! Successfully changed this part out on my son's 2006 A4 and saved a lot of money in the process.
+Gene Sentkowski Thank you for the great reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
This is a great video - bought the part from 1A Auto. I was tempted to replace the switch without the removal of the door handle but I already had the T20 and it gave me a chance to marvel at Audi engineering. Thanks again!
+Dan Haller Thank you for your feedback and your business!
very good review. BUT BEFORE PULL look at the bottom of panel: there should be one more screw at the center. remeber to unscrew it.
+Francesco Tricarico Thanks for checking us out! 1AAuto.com
Best "how to" video ever! I wish I had a shop as nice as yours! I added your website to my Favorites list.
Thanks, great video. Just ordered a new switch from you guys. Rear doors won't open unless I hold down the child safety button but once I release the window stop moving. Also hoping this fixes my problem with the car not unlocking when I get out and my keys and I get locked out. Learned to never get out of the car without my keys or leaving a window open. Thank you, Tom
+Tom Markham Thank you for your order. Keep us posted on how the replacement goes and if your issue is resolved. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
Excellent video! One of the best I've seen. Thx!!
+Fishbowlb Thanks for watching. We're glad you liked it. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Thank you, this was a big help
Your video was simply superb, attention to detail, clips etc, thank you...you help make the complicated simpler!
thank you very much.you just saved me R600 Labour.i managed to do it myself with the help of this excellent video
Llama
Awesome vid, just ordered the replacement switch for my S4. Hopefully have it done and working next week.
+Chad Blanks Thank you for your order. Have a great day! 1aauto.com
Excellent video and thanks for the great deal on the power window switch gear!
However, I want to add to the instructions for this video that might be pertinent to particular years of the Audi A4.
I have a 2003 Audi A4. There is a single Phillips head screw at the very bottom center of the door panel. With the age of my car, it took a fair amount of force to pop the door panel retaining clips off the door. I actually broke two of the clips in the removal process. (This proved to be not vital in replacing the door panel since the panel has many attachment points.)
I would also advise to remove the power lead to the power mirror switch so you can separate the armrest completely from the door panel. Once the armrest is removed from the door panel you can see that the armrest is actually two pieces. Separate the plastic part of the armrest (which holds the power window switch gear) from the rest of the armrest. This will give you access to the window switch on both sides. There are two more retainer clips on the far side of the switch that need to be loosened (like the front side). This made it much easier to remove the switch!
The installation of the switch, putting the door panel back together, and reinstalling the poor panel onto the door was fairly easy.
BTW. The nomenclature, the casing, and the connector look different from the original equipment on my 2003 Audi A4. However, the retainer clips are in the same location and the power connectors matched up and clipped into place with no problem. You don't even notice the different nomenclature on the switches from the other door window switches.
Thank you for the great reply and feedback. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Gus Jay
Thank You helped me through the entire processes of changing my switch very appreciated .
+Edgar Torres Nice work. We're glad the video helped you out. For anyone else looking to replace the master power window switch, 1A Auto offers the part here: www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA%20Comment&ATony
@@1AAuto i have 2003 audi and need a switch but my car has only 2 power windows... do u perhaps have for sale that cind of switch? ty for info
Excellent video, but there is a step you might want to include when you are removing the switch. Sometimes it doesn't lift straight up, like in the video. That's what I experienced; you can take the armrest apart since it also clicks in on the other side as well. Otherwise, you can break the clips that hold it in. Thanks again.
+Nathan Lane Thank you for watching, and the tip. We appreciate all who provide recommendations to assist other viewers in order to ease the replacement. 1aauto.com
Awesome. I followed this while I did it. Aced it guys, thank you!
+cam pearce Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
You dont actually need to remove the arm rest just the door panel. Then remove switch with 90 degree pick and pull on the harness to release it
Great content, once I disassemble my switch box and confirm the driver switch can't really be fixed, I'll place an order through you. Thanks!
+Sean Warren Thank you very much! We appreciate your feedback and your business.
Who can dislike such a video?
Thanks for watching 1aauto.com
Thank you A1 for the great demo. appreciate it big time. Can it be something other than the switch since it works sometimes and completely dead other times? even the gas door won't open when its "dead". love to hear back from you.
Thanks very detailed information
I tried it and it works
Save myself from huge bill👍🏽
+EDIKAY MEDIA Thanks for checking us out! 1AAuto.com
Very good and helpful.
Wow. Video was very helpful. Thank you so much.
there is another screw at the bottom, you need to remove that before pulling the door cover. Audi a4 2008
+Oscar Luis Torres Thank you for watching, as well as the advice! We appreciate any information to help other watchers. 1aauto.com
Oscar Luis Torres just about yank the pocket right off until I noticed that screw. Thanks for sharing!
Not working for me is there more than 4 screws
Thanks for that info! lol I was doing the same thing as Lucas. lol I have an 2003 Audi A4 and the door took a fair amount of "convincing" before it would let loose.
Very helpful video. I replaced mine with one from 1A auto.
+Laith Barhoum Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
Thanks for your video!!! 🙏🏻🙏🏻🙏🏻
My door entered some sort of error, the lights and switches on the door panel don't work but they worked before removing the panel. The speaker works though. Is there something you gotta do to restart the ecu in the door or??
Good clear instructions.
+Robbie the retro robot Thanks for checking us out. 1aauto.com
Awesome and well done video guys. Thank you for posting!
+Mario Herrera Thanks for watching. 1aauto.com
Fabulous! Going to save me £120 at Audi...
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Jon Nott
Somebody soldered after market speaker wires so that I would have to cut them to get the panel off mine. For some reason after trying to remove the switch harness unsuccessfully without taking the panel off, the switch worked long enough to get the rear window back up. I have both master and rear window switches ordered and put them all back together till they arrive.
pretty sure they just push up and out from underneath......... unless I dreamt it :D
Excelent! Very well explained.
+Miguel Bento No problem. Glad to hear it helped you out. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Thank you
This is auch an excellent video! I THINK this is my problem, but maybe you can help? About 2 months ago I left my interior light on overnight which caused my battery to go dead. Ever since recharging the battery, my drivers side window rolls up and down, but none of the others do. Yes, I have tried checking all fuses and engaging and dis engaging the child lock.
+Michelle Harrington Thanks for watching. When the battery died, some of the options may have gone into a fail safe mode. This would have to be diagnosed at a local repair facility for the exact issue. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA+Comment&
very good video, thas mechanics already have arto.
+Kelvin Williams Thanks for checking us out!
Thanks for the video. Very clear and very easy to follow. I ordered the switch from you guys, and installed it in a few minutes! Unfortunately, it did not fix my problem :( All my windows work, EXCEPT the driver side. The switch was pretty easy to replace, so I started there. I'm thinking of replacing the motor, but would like to know if there is some way to check that my wiring is working and it is indeed a bad motor. The electrical connections are pretty complicated.
Any suggestions would be greatly appreciated.
-Mark
+Mark Addesso Thanks for watching. If your driver side window still is inoperable it could be the motor/regulator that is causing this matter. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA+Comment&
Hello sir
I have audi a4 b7 (20007) 2.0 non turbo vehicle
Mine window main swich keep burn out when i replace a new one after 1 ride its burn it out ( not functioning anymore)
I replace with aliexpress non genuine main swich .... Can you give me a solution for that please ... Thank you very much
Hi Mike - two questions:
1. Is the installation pretty similar for a 2011 Q7?
2. My window button is "sticky" ie. Sometimes the window goes down, sometimes is will not... sound like the switch?
+Oscar Mayer Thank you for checking us out. To answer your question number 2 it does appear that the switch is intermittently failing causing this stick. Some of the steps should be similar, but the Q7 will have slightly different steps. 1aauto.com
The rear passenger side looks pretty much the same EXCEPT How do I get the fastener out under the handle? A Phillips doesn't seem to work.
hi,I dont want to the replace switches but arm rest. ¿How to remove white electrical piece (watch on 4:32) in order to insert it in the new arm rest?.
thanks
Dose it work for Audi A3 2006 the same way?
Great video but now my door light isn't coming on. I just installed custom Audi symbol light otherwise I wouldn't care. Can you help
Is the same procedure for the 2007 Audi Q7? Switch looks Identical
+influxvision It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
1A Auto Parts It is very similar, the only difference is, that there is one screw behind the cover in front of the lock buttons, one on the door handle, one on behind the design trim, and one on the bottom center of the door panel
Hello guys. Hope you can help me. On my b6, the window lock button does not hold on the button (meaning it is always up so the windows are always locked). All the controlls work but the button just doesn't hold. Do I need to change the whole piece or can it be something else?
+some105 You may need to change the switch assembly. The button is more than likely worn out. We carry the one shown in this video on our website. Here is a link to them. Hope this helps you out. www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA+Comment&
My Audi has a red light in this switch, Does the replacement part come with a different color than red?
+Jamesson Peña Not sure offhand, but if you call our customer service department they'll be able to give you an answer promptly! Here's the number to call 888-844-3393. Tell them you're inquiring about part number 1AWES00214. Hope this helps you out. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Any body noticed ? Thumbnail says Honda Civic 😅
will this procedure work on a 2005 a6 also ?.
+ed reyes Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs.
For anyone with a 2007 Audi A4, 1A Auto offers this master power window switch here: www.1aauto.com/audi-a4-s4-master-power-window-switch/i/1awes00214?RUclips&CTA%20Comment&ATony
Ok thanks for your help
Power windows isn't working on my 06 cls500 what can I check????? Please help
+Ronnie Hughes You may want to test the power going to the power window switch to see if there is power going from the switch to the power window motor. You can use a test light to test. Hope this helps you out. 1aauto.com
I have audi a4 2003 done all that still wont come out
then your wayering harnes is broken betwen dor and rest of the car... sory my english sucks...
U guys do glove box on a4
+Tony Tonez Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?RUclips&CTA%20Comment& 866-403-3393