Your whole CRF300L mod series is amazing. Having so much fun tricking out my son's bike with him. SM wheels just went on tonight! The father/son time and passing down wrenching knowledge with this project are priceless. Truly grateful my friend!
It's crazy to think how long I've been watching your videos I think I found you back in 2016 and do it Dan it's been great for me to come back to your videos like I never left.
You're the reason I have this bike in a super moto. Sport bikes were first. But now I have my cbr600rr (since 2016) and my 21' crf300l which I super moto'd today. I haven't gotten to mess with it too much but it's basically a huge, powerful Grom. Which was probably my most enjoyed bike I've ever had
Hi, did you have any problems with ABS and did you get a acceptance for the bike? I am looking forward to also buy one and convert it to super moto but in germany laws about the acceptance are very strict...
Built my last build ten yr ago ,and started my frst in 91 ,a kx250 with an rd 400 engine and custom spoked s/s spokes rims .shorter for tubes of an xs 650 .and back swinging arm of a Honda four hundred four ,lots of spacer work ,etc ,took a engineering class for six week .That was long enough to get all the metal one offs I needed .i got more offers on that bike than any bike I’ve ever built .it was fun fun fun .
You should only cut the fork guards where your wheel runs. Put your caliper on before fitting your front wheel. Finger tight all of your axle bolts then spin your front wheel and apply your brake a couple of times before tightening it all up. Most importantly USE LOCTITE on the caliper mount and caliper bolts !!!! I've owned a couple of Supermoto's .. Not trying to be a know it all.. Just trying to help anyone that's going to do this job. You'll be happy that I've told you these things. They are the best bikes imo to ride around on the road for short distances for sure !!!
Damn.. I forgot about the crash at 2:15 on your brother's bike. Holy shit. What a flash back to my high school days when I watched you pop wheelies. Dude you made me laugh so damn much. I'm just happy to see you're still making vids.
Got a 2009 KLX250s and was making fun of it but with the right tyres and snug to hairpin twisties it leaves a huuuuge smile on your face. You can drift with both wheels and 70Km/h and still feel like having fun. Also removed the clutch switch and bike switched to the fast map (weird i know) which ended up with 152km/h top speed, from 137(!!). I can't imagine how much more fun 17inch would be. Wish it was a D-Tracker, though the 21inch feels great when rural tarmac roads get overly rough or mixed with dirt.
Would be sick to see someone with a KLX300 factory SM ride along and compare with the CRF300L conversion. Obviously the KLX is the less expensive way to go, but a side by side of just how much better a swapped CRF is might help the cost difference to be more tangible/measurable.
Man I miss when motovloggers ran RUclips. Okay maybe not but the community used to be so big and now it just doesn't seem like it is. I love you jakey-poo. Been here since your DRZ. Glad you still upload man. Also, I have a 2020 CRF250F & now I wish I waited and got the 300. Thanks, dick.
Pretty sweet, the wheels look awesome. Ah supermotos... maybe one day I will own one. Came pretty close when Honda offered the CRF250M over here, but never pulled the trigger, being vertically challenged dissuaded me pretty fast of the 855mm seat height 🤣 About the chain, having experience with road bikes and industrial chains, the interference fit in motorcycles clip links threw me off the first time I used one, is that possibly why there was so much talk about clip failures back in the day? Impossible to sit the plates by hand and it feels sketch trying to use pliers on it. I ended using a simple cheap C clamp, the old outer plate and 2 M8 nuts to sit over the pins and push the new outer plate straight in. The little leaflet that came with the link was pretty light in details, no mention of a chain tool as necessary for a correct installation.
Yeah that’s an o ring thing, the interference fit. I also have a c clamp I’ve used to do it. But the thing you gotta watch is sometimes the pins start pushing out the back of the inward link. If you install a non o ring chain (dirt bike use em) you’ll see the link just slips on.
Dude don't let the high seat scare you, with supermoto trim it lowers it a bit and the bikes are so light, sumo will change your life! Worst case you can buy lowering links for most bikes.
All that work and you still have the OEM exhaust on it lol that's the first thing that comes off my bikes , after market full exhaust and an ECU flash or fuel controller , super nice bike tho man ! Love it , clean as hell
Love it only thing I might if done is take an extra 1 or two links out because it’s quite slack and the chain is new so it will stretch only time you need a super slack chain is if it’s going to be off road and doing jumps and catching air so it has room when the rear shock compresses
Man I kept pushing wide coming outa that turn (was on a big ol 701sm, she don’t change direction quite as easy) so outa frustration I kept getting harder on the throttle on exit 😂
2:25 I was ripping through a sand wash out and my front must have caught, I went near sideways and my right knee kissed the ground and I jolted back up straight like nothing happened. I lost my shit I has so pumped.
Time to get a proper case saver. First ride out on my 450L and it ended up packing its self full of mud and stones. Supermoto is not for me but good video for any one that wants to do it.
Yep yep yep haha. I hate that thing. But the aftermarket ones I’ve seen don’t have a case saver built in. They’re just open covers. May hack this thing up to open it up.
Supermotos take SUCH A MORE BEATING. Have you seen those Continental ContiAttack SM Supermoto EVO tires? The Continental Road Attack 3 already have a roughed surface ("TractionSkin") from the mold, no need to scrub them.
nice content. is your wheel sizes 17-3.5 and 17-4.5. Some friends advice me for the rear to use 17-4.25, from your experience what you think of the rear sizes which is the best is it 17-4.5 or 17-4.25. Thanks
Ouff i am existed to when I can ride a 300, I live in Norway so i only have the a1 license, got a Yamaha wr125x but I wish it had more power tho, it still wheelies like a king so can’t really complain
I bought a KLX300SM. I wanted the suspension tuning that came with the KLX300SM. I may pick up a set of dual sport wheel/tires for road trips where I might ride both street and trail.
I mean... I get what you're going for. I would love to put something like this on a track against an old Suzuki Bandit 400 (video suggestion hint hint). I think the Bandit would mop the floor with it on anything paved. You could probably get one for less than your cost in mods. Good to see what [can] be done.
Got the chain from Revzilla and the gold clip on link . The the gold link looks a little different as it’s not EK . Was yours ? I’m a bit apprehensive about the chain joining . Great videos btw I’m building my CRF and had loads of gear shipped to the 🇬🇧💵💵 just couldn’t resist ! You’re bike looks very nice
It's very easy to tell which youtuber is an actual professional, and which one just repeats whatever others do in their videos. This guy is one of the repeaters.
When I start adding up all the mods on this bike. I am quickly approaching the 450 price. And I have stopped adding up the numbers. If I added them all up I think I would be approaching African Queen price. 😜😜. I am following every video though and taking in what I think I might want to do and what I can live without.
I have been doing this since 1993 SuperMoto that is--- i was Danish Champion in 1995 on a CR500 equipped with CBR600F1 wheels -- So tell me W H Y its a bad idea to go with forged wheels ?. My current fun-bike is a -00 GASGSA 250 equipped with Aprilia RS125 forged wheels.
Everything would be the same except the relocation bracket. The rally runs a different front brake. But warp9 has the rally as an option so just select that and 👍
@@TheGardenSnake I guess I probably know the answer considering which you bought, but do you think the bike is quick enough to make the screen worth it? Do you ever feel like you’re missing a larger tank?
No I didn’t check that and if I didn’t it now it would be different. Since that video I’ve done full race tech suspension. The bike sits up a good bit higher now. Still can easily flat foot, I’m 6 foot with a 33 inch inseam.
@@TheGardenSnake Based on the tires it should have been roughly 1.8" lower in the front and about .75" in the rear, so seat was probably 1.25" ish lower. Just for whatever newer or shorter rider was curious of the math. I'll ride anything but it's always nice to be able to flat foot at a stop if need be :D
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Your whole CRF300L mod series is amazing. Having so much fun tricking out my son's bike with him. SM wheels just went on tonight! The father/son time and passing down wrenching knowledge with this project are priceless. Truly grateful my friend!
Every explanation you do is godlike
That's what I live for
I was watching a Seaky video before and now this... you are in the comments of every youtuber I like 😂
It's crazy to think how long I've been watching your videos I think I found you back in 2016 and do it Dan it's been great for me to come back to your videos like I never left.
about the same here... i started watching jake when i lived in cali no bike georgia no bike and now Dallas Texas about to get a bike lol
The color of those wheels compliments the graphics kit quite well. The Honda is looking really good in supermoto trim.
You're the reason I have this bike in a super moto. Sport bikes were first. But now I have my cbr600rr (since 2016) and my 21' crf300l which I super moto'd today. I haven't gotten to mess with it too much but it's basically a huge, powerful Grom. Which was probably my most enjoyed bike I've ever had
Hi, did you have any problems with ABS and did you get a acceptance for the bike? I am looking forward to also buy one and convert it to super moto but in germany laws about the acceptance are very strict...
jake . ive been watching alot of ppl who own this bike and you have the nicest and sickest looking build . color scheme and style . so sick dude
Was looking at CRF300L's today and asked myself "has anyone SM'd one of these?". Glad to see you were the first YT result.
Amazing work pal!
One of these days I’m coming over there to see spicy and you all
I usually hate forged wheels on supermotos but I have to say these looks very nice!
Built my last build ten yr ago ,and started my frst in 91 ,a kx250 with an rd 400 engine and custom spoked s/s spokes rims .shorter for tubes of an xs 650 .and back swinging arm of a Honda four hundred four ,lots of spacer work ,etc ,took a engineering class for six week .That was long enough to get all the metal one offs I needed .i got more offers on that bike than any bike I’ve ever built .it was fun fun fun .
Old school 701 ride out footage baby!
Damn bih you’re alive?
Pls come back
You should only cut the fork guards where your wheel runs. Put your caliper on before fitting your front wheel. Finger tight all of your axle bolts then spin your front wheel and apply your brake a couple of times before tightening it all up. Most importantly USE LOCTITE on the caliper mount and caliper bolts !!!!
I've owned a couple of Supermoto's .. Not trying to be a know it all.. Just trying to help anyone that's going to do this job. You'll be happy that I've told you these things. They are the best bikes imo to ride around on the road for short distances for sure !!!
It’s been a while since I’ve watched Jake’s videos, I’m glad he still enthusiasm about supermotos
Came out SICK!!!
Damn.. I forgot about the crash at 2:15 on your brother's bike. Holy shit. What a flash back to my high school days when I watched you pop wheelies. Dude you made me laugh so damn much. I'm just happy to see you're still making vids.
Aye! What do ya know, a late night upload!! My fav.
Dude, it looks sick! I'm liking the forged wheels. Insert gas, extract fun.
Your the reason I even bought a sumo. Now have a 2020 500 sumo and love it
Got a 2009 KLX250s and was making fun of it but with the right tyres and snug to hairpin twisties it leaves a huuuuge smile on your face. You can drift with both wheels and 70Km/h and still feel like having fun. Also removed the clutch switch and bike switched to the fast map (weird i know) which ended up with 152km/h top speed, from 137(!!). I can't imagine how much more fun 17inch would be. Wish it was a D-Tracker, though the 21inch feels great when rural tarmac roads get overly rough or mixed with dirt.
Some say its a French idea.but American superbikers comp ..Magoo... wise..etc was the birth of this rad concept, you sled is 👌. Uk north
Mannn that came out so nice! 😍👌🏻
You cleaned off the OEM chain lube....... that stuff is like gold lol
Gold at attracting dirt and spraying lube EVERYWHERE 😂
@@TheGardenSnake never had a new chain throw the factory lube anywhere lol
I fitted this chain and yes it threw grease everywhere . Clean it before fitting it . I’m still finding white sticky grease all over 🤷🏻♂️🥲
Why is that can you explain?
Whats the best bike ,too put good milage on bro ,@TheGardenSnake
Awesome video!! Impressive editing, great info, and amazing looking bike!! 🔥💪
Thanks
Would be sick to see someone with a KLX300 factory SM ride along and compare with the CRF300L conversion. Obviously the KLX is the less expensive way to go, but a side by side of just how much better a swapped CRF is might help the cost difference to be more tangible/measurable.
Man I miss when motovloggers ran RUclips. Okay maybe not but the community used to be so big and now it just doesn't seem like it is. I love you jakey-poo. Been here since your DRZ. Glad you still upload man. Also, I have a 2020 CRF250F & now I wish I waited and got the 300. Thanks, dick.
Pretty sweet, the wheels look awesome. Ah supermotos... maybe one day I will own one. Came pretty close when Honda offered the CRF250M over here, but never pulled the trigger, being vertically challenged dissuaded me pretty fast of the 855mm seat height 🤣
About the chain, having experience with road bikes and industrial chains, the interference fit in motorcycles clip links threw me off the first time I used one, is that possibly why there was so much talk about clip failures back in the day?
Impossible to sit the plates by hand and it feels sketch trying to use pliers on it. I ended using a simple cheap C clamp, the old outer plate and 2 M8 nuts to sit over the pins and push the new outer plate straight in. The little leaflet that came with the link was pretty light in details, no mention of a chain tool as necessary for a correct installation.
Yeah that’s an o ring thing, the interference fit. I also have a c clamp I’ve used to do it. But the thing you gotta watch is sometimes the pins start pushing out the back of the inward link. If you install a non o ring chain (dirt bike use em) you’ll see the link just slips on.
Dude don't let the high seat scare you, with supermoto trim it lowers it a bit and the bikes are so light, sumo will change your life! Worst case you can buy lowering links for most bikes.
Nice to find a local channel that’s building bikes. #funkytown
All that work and you still have the OEM exhaust on it lol that's the first thing that comes off my bikes , after market full exhaust and an ECU flash or fuel controller , super nice bike tho man ! Love it , clean as hell
6:17 A chain breaking tool just like the one you have does absolutely work.
I've used it at least 6 times.
Love it only thing I might if done is take an extra 1 or two links out because it’s quite slack and the chain is new so it will stretch only time you need a super slack chain is if it’s going to be off road and doing jumps and catching air so it has room when the rear shock compresses
i have watched already what you did for the abs. thanks for sharing .
2:23 I did that same thing on the same corner at Adams but low sided, nice catch
Man I kept pushing wide coming outa that turn (was on a big ol 701sm, she don’t change direction quite as easy) so outa frustration I kept getting harder on the throttle on exit 😂
Very cool bike 😊 i build my first SM back in 2000 from a 96 XR600R that bike was a beast
Finally. Looks sick.
I take this over the kawasaki klx300sm
2:25 I was ripping through a sand wash out and my front must have caught, I went near sideways and my right knee kissed the ground and I jolted back up straight like nothing happened. I lost my shit I has so pumped.
i used to watch you for addgeesss, then i sold my super moto and interests changed..... BUT IM BACKKK haha
Time to get a proper case saver. First ride out on my 450L and it ended up packing its self full of mud and stones. Supermoto is not for me but good video for any one that wants to do it.
Yep yep yep haha. I hate that thing. But the aftermarket ones I’ve seen don’t have a case saver built in. They’re just open covers. May hack this thing up to open it up.
Supermotos take SUCH A MORE BEATING.
Have you seen those Continental ContiAttack SM Supermoto EVO tires? The Continental Road Attack 3 already have a roughed surface ("TractionSkin") from the mold, no need to scrub them.
Wow this justifies getting a CRF300L!!! Two bikes in one!
Its hard to explain how much fun a supermoto is to people. its one of those thing where you just have to try it to see
I've been waiting for this lol
nice content. is your wheel sizes 17-3.5 and 17-4.5. Some friends advice me for the rear to use 17-4.25, from your experience what you think of the rear sizes which is the best is it 17-4.5 or 17-4.25. Thanks
Great video nicely Converted
İs Honda 300L 27Hp has enough power to give youre supermoto expectations?
Are you stasfied acceleration agile ?
Great vid as always... now we just have to wait for the wheeeelieees
Nice work , time to get an old CR500 .
In a crf450 frame!
Damn that 300 looks good!
a friend of mine in college was from France.. he had a super moto in 1996
Супермото, отличный мотоцик 👍👍👍👍 пушка 👍👍👍👍
Dont have factory super motos much stiffer suspension than dirt bikes too?
Ouff i am existed to when I can ride a 300, I live in Norway so i only have the a1 license, got a Yamaha wr125x but I wish it had more power tho, it still wheelies like a king so can’t really complain
What are the rim and tire sizes? Want to go with the same dimensions you did for my first
Super moto’s are the shit!!!!
I bought a KLX300SM. I wanted the suspension tuning that came with the KLX300SM. I may pick up a set of dual sport wheel/tires for road trips where I might ride both street and trail.
I mean... I get what you're going for. I would love to put something like this on a track against an old Suzuki Bandit 400 (video suggestion hint hint). I think the Bandit would mop the floor with it on anything paved. You could probably get one for less than your cost in mods. Good to see what [can] be done.
This Supermoto is only missing one OG Garden Snake feature, the Skate Wheel Slider!
This thing looks sick, wonder what a crf300l costs over here
Bike looks mint! Gr8 vid ❣✌
wonderful bike
Been rhinking sbout getting a used wr250r and getting super moto wheels
What handguards, headlight and tail light did you go with? I like the integrated "sleek" look. Thanks
Got the chain from Revzilla and the gold clip on link . The the gold link looks a little different as it’s not EK . Was yours ? I’m a bit apprehensive about the chain joining . Great videos btw I’m building my CRF and had loads of gear shipped to the 🇬🇧💵💵 just couldn’t resist ! You’re bike looks very nice
I didn’t have any issue with the link. It worked fine for me.
@@TheGardenSnake
Can I remove the wheels to swap motor for dirt with the chain riveted
10:28 not trying to be a smartass, but why? i always leave the factory grease on there until the first time i need to relube it. is that bad?
Jake got the rubber gloves on. What dimension am I in right now
Where do you get the relocation bracket?
“Before they were cool” It’s been a while, hmu up bro
What do you think about running a 17” knobbies on a super moto? Seems like that would work really well off-road
They ok but since I have the other wheels I just switch back when I want to do lots of off road stuff.
amazing work, increíble trabajo
It's very easy to tell which youtuber is an actual professional, and which one just repeats whatever others do in their videos. This guy is one of the repeaters.
I’m a certified motorcycle mechanic…
Bad ass machine right there
What hand guard are those?
When I start adding up all the mods on this bike. I am quickly approaching the 450 price. And I have stopped adding up the numbers. If I added them all up I think I would be approaching African Queen price. 😜😜.
I am following every video though and taking in what I think I might want to do and what I can live without.
Looks badass man!
Using a front plate from a different chain to the masterlink is a bit of a gamble...
I measured it and it was the same. At least to a 100th of an inch.
Bro what about suspension tuning and engine tuning ??
Great video thanks! What rear shock upgrade did you do ? Or can you recommend one ? Please 🤦🏻♂️🤦🏻♂️🤦🏻♂️
I see that there is no chain guard on. Are you not able to use the factory guard?
I wonder how much shorter if you convert it to supermoto. I don’t want it to be short since dual sport setup is already a bit short for me
Nice vid, thanks!
Jake where did you get the blue/red frame protector stickers?
It was apart of the graphics kit. That company is out of business now.
Looks crazy mean bro!!!
How much $$$ did the conversion ended up costing???
Love the wheels
hi friend i just got one i am in the uk hope you are well
Looks sick and badass
I have been doing this since 1993 SuperMoto that is--- i was Danish Champion in 1995 on a CR500 equipped with CBR600F1 wheels -- So tell me W H Y its a bad idea to go with forged wheels ?. My current fun-bike is a -00 GASGSA 250 equipped with Aprilia RS125 forged wheels.
Im surprised you still have a stock pipe on there. Are you waiting for a FMF pipe or something else? or have you just not got around to it?
I’ve had a pipe on order for months. Lots of other people got there’s. Me… 🤷♂️
Nice set up. Do the 17” SuperMoto wheels lower the seat height? If so how much approximately?
Looking a real nice.
is the xr 650l a good bike for supermoto?
The bike looks stunning 😍
Did you just buy a second 320mm front rotor from Warp 9, or did you go a different brand?
I got a second one from warp9
Thanks. I figured that was the case, just wasn’t sure if it would fit on the stock wheels.
how wide is the rear tire?
What brand of tail light are you using now?
So the bike, wheel kit and extras, to make it a street bike is about $7,150..Or just get a street CB300 R for $5,150. Is it that much better?
Looks good now we need honda to mass produce good supermotos, they've always had the means to but never really did
Think I could sumo the 300L rally? I’m sure most parts are the same.
Everything would be the same except the relocation bracket. The rally runs a different front brake. But warp9 has the rally as an option so just select that and 👍
@@TheGardenSnake I guess I probably know the answer considering which you bought, but do you think the bike is quick enough to make the screen worth it? Do you ever feel like you’re missing a larger tank?
@JakeTheGardenSnake do you have any problems with ABS? I have a very similar setup on my 300l and warp9 SM but have a blinking ABS light? Any ideas?
Can you explain your brake pad choice. I see the link but why did you go with them?
Thank you for the parts list! I’m 100% doing this!
Out of curiosity, do you happen to have a seat height difference measurement?
No I didn’t check that and if I didn’t it now it would be different. Since that video I’ve done full race tech suspension. The bike sits up a good bit higher now. Still can easily flat foot, I’m 6 foot with a 33 inch inseam.
@@TheGardenSnake Based on the tires it should have been roughly 1.8" lower in the front and about .75" in the rear, so seat was probably 1.25" ish lower. Just for whatever newer or shorter rider was curious of the math. I'll ride anything but it's always nice to be able to flat foot at a stop if need be :D
when i click the link for the front sprocket its only showing 13 - 14t could you please provide another link to the 15t sprocket thanks
No need to change fork length to accomodate new wheel diamater 21 -> 19 without changing bike´s geometry?
how did you correct the ABS after changing it to 17 inch wheel? thanks and more power to your channel
Probably pulled the fuse. Who wants abs on a supermoto?
@@maydaverave thanks man