I guess you learned a lot before becoming Dr. Solar and now you still learn as you develop with the market and industry. Thanks for sharing it with the noobs like me, dedicated pro.
Thank you for watching. You are welcome. Please ask your supplier for the more recent version. I only have the 5 kw and 8 firmware for the hybrid Inverters
Hi sir I have same inverter exactly, my inverter has tripping issue. In night when only on grid and battery, it suddenly stop grid, no error code just show off grid, then reconnect automatically, it happens continuously, I have checked my grid voltage and frequency are good and in range. What can be the issue?
Doctor, kind regards. I have a question. I have an inverter deye8Kilowatts What is the maximum current that can be drawn from the network to prepare the house and charge the batteries Thank you for your cooperation
Hello thanks for the video, i have access to the latest firmwares but i am not sure which ones are compatable with my 8k inverter.. do you have info what are mcu1 and mcu2 which version should i choose Axx or Cxx
Dr Solar. When we connect with the IP address mentioned in your video the system asks for username and password. What is the username/password combination? It is not the WIFI adaptor username/password. Is this a direct access to Deye user interface?
Thank you, sir, for the video, sir. I have 2 inverters of 8 kilowatts, single phase, connected to a toolzie, and I arrived with 3 batteries, 15 kilowatts, in parallel, and I need to download Virgin 1001 -c361 In order for the inverter to read the batteries, can you teach me how to carry the virgin with thanks and appreciation
Good afternoon Haider. Welcome to the channel. Who sold you the inverter? If you have it online they can get Deye to update the firmware remotely. You don't have enugh batteries. Your inverters can discharge 190 amps each. Your battery can't handle that.
Hello Dr Solar...! hope you are doing so well .. please can you tell me how can i get a firmware to my 12k deye power inverter..? when i connected two deye inverter with different firmware version i get CANBUS_fault message . and i have to update one of them to reach the other firmware, but i couldt find a firmware. so please if you can help me.
I had a small problem in my relay dry contact to turn on and off my generator by the deye 8k hybrid , so I contacted there service office in china , they updated the software , and now it is much much worse, when I click on gen force , generator is always on , and if I don't generator never turns on when batteries reach min, how can I downgrade
hello how to get the files to do the upgrade and how to know each version what its and lately the deye and felicity battery wouldn't connect what we can do for that ? and what is the important of the updates thank you
Good morning Mahmoud. Thank you for watching and commenting. If your inverter is stable I would not do a firmware update. Communication between batteries and inverters. If it is compatible then your settings or cables are the problem. Are you using Can? Read the battery manual.
@@drsolar thanks a lot for your replay , so far no problem but here in Lebanon the deye company want to make an update to there inverters so they can't connect to felicity batteries , so they can sell there batteries so we are getting ready for that . So you said there is no need to make any update as long as things going well
I had the Deye team upgrade my 8kw hybrid inverter and they upgraded it with the 5kw firmware. Lots of error codes and emails they finaly flashed it with the correct firmware. However now my inverter is stuck in standby mode and does not switch to normal mode nor does it charge the batteries from the grid. Is there any way you can assist me as Deye support has gone silent after they saw their mistake. Will you be able to send me the files so I can get my power back please.
Email them and make a stink. I will send you the correct firmware. They have made this error before. A friend in California had the same problem. It took a while but they fixed it
You updated the Inverter with MCU2 file. How about MCU1 file , shouldn't be updated as well for the firmware? I had 12kw qty 3 of different HMI , git the latest MCU2 C034 Version, but after the update, I got a problem that I can't choose Export to Load option. It always switches to Export to CT, and the CT is giving wrong reading's
With the Deye, I have stopped doing firmware updates. The tech team at Deye do it when they try to correct issues and 9 out of 10 times it does not work. If it is working fine let it be.
Why is it sad? The product ship at different times. For singular use it is just fine. When you parallel they have to run the same firmware. I bought from 2 different people. Victron and Schneider have the same thing too. How have you been?
@@drsolar I figured you purchased them at the same time from the same seller. We are good here. Waiting for winter to hit fully. Got some snow this morning and working on next year's firewood. Been busy otherwise. Nice big build you got there. Hope you are well
I see inverter #5 has only variation from other inverters. Its Hmi version is c353.I suggest downgrade it to c349 just like the rest.Main1 must remain as 6006.FYI HMI means human machine interface which is the touch screen module of inverter which why it displays infos differently from the rest of inverters.
Hello Dr Solar.... I am currently working on a 50kW hybrid inverter. I would appreciate if i can reach you personally for assistant and support. Thanks
@@ziadkhalil4913 22 of them. You can do 23 or 24. Just remember that you can do three strings. So make sure you don't the short circuit voltage per string. Safely 8 per string if you do 24.
@@drsolar morning Dr. Sorry I’m bothering you with my question, pls if I install 3 strings each one 8 pcs of jinko 465W and link them to the Deye 8KW I’ll be on the safe side right as you recommend before, now my question is this 3 strings will be connected one of the MPPT then the other line of the MPPT must be empty right? Thanks again nice hearing from you
in my country DEYE don't have support team I have buy 5Kva Hybrid invertor from local market will they support me by online please send me their support website or e-mail that can support me.
Absolute hero for figuring this out for all those who would've struggled, thank you sir.
Thank you for your kind words. Please forget to like share and subscribe
I guess you learned a lot before becoming Dr. Solar and now you still learn as you develop with the market and industry. Thanks for sharing it with the noobs like me, dedicated pro.
Yes I learnt a lot. I will do a summary of what lessons I learnt. Thank you for your support Doug
Hi thanks for video. How can i find deye 3kw on grid firm ware ?
Thank you for watching. You are welcome. Please ask your supplier for the more recent version. I only have the 5 kw and 8 firmware for the hybrid Inverters
@@drsolar thank you very much. I have got problem on my deye 3kw. I get solar panel volt dc. But i cant see watt on deye
Does the inverter work? How do you have it connected? What are you trying to accomplish with the firmware update?
@@drsolar yes now working but i can find firmware yet
Hello Sir what version right now is the latest for 8kW Hybrid Inverter. Thanks
Thank you for watching and commenting. We don't install them anymore. So I don't know the most recent. If we are not having issues we don't update.
Hi sir I have same inverter exactly, my inverter has tripping issue.
In night when only on grid and battery, it suddenly stop grid, no error code just show off grid, then reconnect automatically, it happens continuously, I have checked my grid voltage and frequency are good and in range.
What can be the issue?
Try a firmware update first
Hello Dr Solar I replaced my 8kw deye inverter drive board but the f20 fault still keeps coming up any suggestions?
Sorry to hear about your problems with the inverter. Consult with Deye before you do an repairs
Doctor, kind regards. I have a question. I have an inverter deye8Kilowatts What is the maximum current that can be drawn from the network to prepare the house and charge the batteries Thank you for your cooperation
190 amps charge and discharge
Hello thanks for the video, i have access to the latest firmwares but i am not sure which ones are compatable with my 8k inverter.. do you have info what are mcu1 and mcu2 which version should i choose Axx or Cxx
I usually reach out to Deye and they do the update remotely. Sorry I am not able to help you.
@@drsolar all good bro
Das Firmwareupdate funktioniert problemlos, aber woher bekommt man das Deutsche Language Pack, und wie installiert man es?
Thank you for watching and commenting. I am not aware of language packs. Deye might respond to your request.
Hello Sir, my Deye inverter has an f31 error and have been run on ac power all through has on you help advice
I am not familiar with this code. Reach out Deye for assistance. Thank you for watching and commenting. Sorry I couldn't help.
Dr Solar. When we connect with the IP address mentioned in your video the system asks for username and password. What is the username/password combination? It is not the WIFI adaptor username/password. Is this a direct access to Deye user interface?
You and I have resolved this
@@drsolar You solved the issue. Thank you for being humble.
@@drsolar How did you solve that??
@@krikornajarian2756 How did you solve that??
Hello, did 12kw hybrid inverter 3phase already updated in parallel connection
Yes they did
OK So you logged into the inverter via its IP, Can the upgrade be done from Solarman if its online?
Thank you for watching and commenting. Yes it can.
Hello Dr. Solar... Where to download the newest firmware of the deye? Is it on their website?. Thanks
Good morning from Lagos Nigeria. I got the firmware from the Deye technical team. I hope that helps
@@drsolar please share via google drive or details to contact them
Hello i update 1 of system updated and 1 of the inverter frame-ware didn’t change what may cause this problem?
Try the firmware update again.
I try still as it is nothing change same old ver
hello, very interesting, but how to get the firmware update file?
Your retailer should have it.
Thank you, sir, for the video, sir. I have 2 inverters of 8 kilowatts, single phase, connected to a toolzie, and I arrived with 3 batteries, 15 kilowatts, in parallel, and I need to download Virgin 1001 -c361 In order for the inverter to read the batteries, can you teach me how to carry the virgin with thanks and appreciation
Good afternoon Haider. Welcome to the channel. Who sold you the inverter? If you have it online they can get Deye to update the firmware remotely. You don't have enugh batteries. Your inverters can discharge 190 amps each. Your battery can't handle that.
Where can the Deye inverter firmwares be downloaded from?
Contact your seller. He will tell Deye to update your inverter
Hello Dr Solar...!
hope you are doing so well ..
please can you tell me how can i get a firmware to my 12k deye power inverter..?
when i connected two deye inverter with different firmware version i get CANBUS_fault message .
and i have to update one of them to reach the other firmware, but i couldt find a firmware.
so please if you can help me.
Congrats on your new purchase. Do you have them online yet?
@@drsolar
Yes both of them online..!
@@alimibrahem8120 email me the logger information for both and I will ask Deye to update them for you
I had a small problem in my relay dry contact to turn on and off my generator by the deye 8k hybrid , so I contacted there service office in china , they updated the software , and now it is much much worse, when I click on gen force , generator is always on , and if I don't generator never turns on when batteries reach min, how can I downgrade
I had the same issue at the beginning with Deye. Have them double check your settings
same happened with me. did you find a fix?
hello how to get the files to do the upgrade and how to know each version what its and lately the deye and felicity battery wouldn't connect what we can do for that ?
and what is the important of the updates
thank you
Good morning Mahmoud. Thank you for watching and commenting. If your inverter is stable I would not do a firmware update. Communication between batteries and inverters. If it is compatible then your settings or cables are the problem. Are you using Can? Read the battery manual.
@@drsolar thanks a lot for your replay , so far no problem but here in Lebanon the deye company want to make an update to there inverters so they can't connect to felicity batteries , so they can sell there batteries so we are getting ready for that .
So you said there is no need to make any update as long as things going well
@@mahmoudghazzawi8551 yes. If it is working fine. No need to do an update
I had the Deye team upgrade my 8kw hybrid inverter and they upgraded it with the 5kw firmware. Lots of error codes and emails they finaly flashed it with the correct firmware. However now my inverter is stuck in standby mode and does not switch to normal mode nor does it charge the batteries from the grid. Is there any way you can assist me as Deye support has gone silent after they saw their mistake. Will you be able to send me the files so I can get my power back please.
Email them and make a stink. I will send you the correct firmware. They have made this error before. A friend in California had the same problem. It took a while but they fixed it
Hello I am also in need of help with this matter can someone please send me the firmware for a 8kw inverter
Does the Deye hybrid inverter work well? Does it give a lot of trouble and is it worth the money?
They can be very easy to use and can be reliable. We install many more so we are likely to see issues that you would never experience
Thank you for these useful videos. Could you please do a walk through video of how the connecting wires go from one inverter to the next in parallel ?
Thank you for watching and commenting. If I have my recording devices with me when I visit, I would.
You updated the Inverter with MCU2 file. How about MCU1 file , shouldn't be updated as well for the firmware?
I had 12kw qty 3 of different HMI , git the latest MCU2 C034 Version, but after the update, I got a problem that I can't choose Export to Load option. It always switches to Export to CT, and the CT is giving wrong reading's
With the Deye, I have stopped doing firmware updates. The tech team at Deye do it when they try to correct issues and 9 out of 10 times it does not work. If it is working fine let it be.
Where do you download the firmware (bin files?
Deye does the update remotely
I never liked doing firmware upgrades as sometimes they would destroy the chip but I guess we have come along ways as that was 10 years ago.
Unless you get a leap in features sometimes they are not necessary. Victron pushes updates very frequently
Can you help me get the file download link. I couldn't find it online
there is no download link. Someone has to send you the file. Contact your supplier.
hello Dr solar, from where can we download or get firmware files of Deye inverters
Your reseller can get it for you or your contacts at Deye
Pretty sad that the seller doesnt update the firmware before shipping. Makes it difficult
Why is it sad? The product ship at different times. For singular use it is just fine. When you parallel they have to run the same firmware. I bought from 2 different people. Victron and Schneider have the same thing too. How have you been?
@@drsolar I figured you purchased them at the same time from the same seller. We are good here. Waiting for winter to hit fully. Got some snow this morning and working on next year's firewood. Been busy otherwise. Nice big build you got there. Hope you are well
From where have you downloaded the firmware?
Deye does the update
I see inverter #5 has only variation from other inverters. Its Hmi version is c353.I suggest downgrade it to c349 just like the rest.Main1 must remain as 6006.FYI HMI means human machine interface which is the touch screen module of inverter which why it displays infos differently from the rest of inverters.
Thanks for the lesson. I learn something new every day
Hello Dr Solar.... I am currently working on a 50kW hybrid inverter. I would appreciate if i can reach you personally for assistant and support. Thanks
That is a big one. Feel free to reach out
How can u open browser when internet is not available...
You connect to the dongle of the inverter. Enter the ip address. You don't need to have internet available to do that.
From where I can get latest softwere@@drsolar
Nice work Dr. I’m surprised to see a lithium batteries with BMS in a cabinet’s Also Deye is one of the best inverter’s as a grad A in china
Thank you for watching and commenting. Once you do large systems you need enclosures to house the battery.
Dr pls how many panels can we install at the Deye 8KW the panels are Jinko 465W
@@ziadkhalil4913 22 of them. You can do 23 or 24. Just remember that you can do three strings. So make sure you don't the short circuit voltage per string. Safely 8 per string if you do 24.
@@ziadkhalil4913 good day. I will do 3 strings of 8 for a total of 24. Should keep you at very safe numbers. Good luck
@@drsolar morning Dr. Sorry I’m bothering you with my question, pls if I install 3 strings each one 8 pcs of jinko 465W and link them to the Deye 8KW I’ll be on the safe side right as you recommend before, now my question is this 3 strings will be connected one of the MPPT then the other line of the MPPT must be empty right?
Thanks again nice hearing from you
Hello dear how can get last version deye update??? please send me like for download
Sorry I don't do or support Deye anymore. What is the particular reason for the update? Are you online? The can update you if the inverter is online.
@@drsolar I have problem F29 parallel, and version inverters are difference , so I need update file for some version , I hope you can help me
@@aresbarznjy6027 is the inverter online
Where can we get updated firmware
Thank you for watching and commenting. Your supplier usually can get it for you.
it will be done online ??? if we have no physical access to the inverter???
Chciałbym zmienić górne i dolne nastawy z 480 na 600v. Czy może pomóc ktoś w upgradzie ?
Thank you for watching and commenting. What settings? If you are talking of PV. That is limited by hardware.
Good video good work very good new project complete very nice
Thank you so much 😀
being in it , weŕe thought to upgrade firmware before doing anything else when deploying new stuff..
i guess that is also true on solar stuff ;-)
For one inverter it is not really necessary. You don't really notice. I usually have them do it remotely. It just was not working this time around.
Hello, where can i get that wizard program? Thanks
It is web based
The site is asking me the username and password. From where should i get them?
Good evening. Who gave you the site address? They usually supply the password
default for mine is user admin pass admin
@@akornow that is the default for all
❤
Thank you for watching
Ist das ein Mist. Unglaublich.
When I used translate it did not translate well.
in my country DEYE don't have support team I have buy 5Kva Hybrid invertor from local market will they support me by online please send me their support website or e-mail that can support me.
Reach out to your seller. That was the way I reached them.
U bought it from inverex??
@@skmoolchandani8230 I purchased it from Deye. Thank you for watching and commenting