Abaris Blower Repair corporate film
HTML-код
- Опубликовано: 27 авг 2024
- The service specialists for your rotating equipment
Repair of rotating equipment of air or gasses, such as industrial fans, positive displacement blowers (rootsblowers), side channel blowers, rotary vane compressors, screw compressors, reciprocating compressors, refrigeration compressors, liquid ring vacuum pumps/compressors, all medium or high vacuum pumps, ...On site maintenance, reconditioning, optimalization,..
Abaris is also the Benelux service center of Meidinger AG, a swiss manufacturer of industrial fans for ATEX applications (zone 2 till zone 0 internal) and biogas.
Our service:
- Repairing, modifying and maintaining rotating equipment manufactured by any reputable machine constructor from all over the world, especially blower and compressor installations.
- Maintenance contracts,
- 24h emergency service,
- vibration analysis,
- noise measurements,
- laser alignments,
- spare parts and accessories.
Some of our experiences :
Roots blowers : BOC Edwards, Busch, Dresser, Gardner Denver, Hibon, Hick Hargreaves, HV Turbo, Kaeser, Peabody Holmes, Pedrogil, Robuschi, Spellna, Sutorbilt, Tuthill, Unozawa, WKE, …
Rotary vane pumps and compressors : Becker, Wittig, Busch, Elmo Rietschle, Blackmer, …
Screw/reciprocating compressors : Atlas Copco, Boge, BVC Lamson, Daikin, GHH Rand, Hibon, ….
Lateral channel blowers - compressors : Elmo Rietschle, FPZ, Siemens, …
Industrial fans : Meidinger
Film by Abaris Blower Repair nv, (C) 2012. All rights reserved. Unauthorized reproduction is a violation of applicable laws.
Nice seeing this... I used to repair and test this type of boosters mostly the 10x24 roots. Very nice video
The most important part of this overhauling job is to measure the rotor runout, shaft /bore fits and tolerance.
this is very good video ,thanks Abaris .......
Thank your video so much! Can you share more detailed videos on your RUclips channel!
How much is the distance between rotors?
Can you answer on my question please.
I mean on the distance where you measure it at 3:11 on the video.
Thanks
Wats ur blower /booster capacity size. I have good command on screw pump ,booster & blowers . pramoddevelopment1989@gmail.com, +919599409423 is my contact number
Good question. Rotor to rotor distance must be set depend on the backlash of the gear and run-out of the rotors. Suppose you have Gear Backlash = 0.10mm as per the video and rotor runout = 0.02mm then add them all = 0.12mm. This means that the distance between rotor must be above 0.12mm to avoid rotor collision. Therefore you can use 0.20mm filler gauge between rotors when you tight the gear. I hope this will help you ✌️
sir Please tell me 2 lobs timings sittings pleas
Salut j'ai besoin d'un compresseur aspirateur
2:17 wtf? pressing a bearing on the inner race!?!?
Good video, Can i Ask you about timing of rotors, smallest minus reading, smallest plus reading abd setting the interlobe clearance, thank you
@@khalidbouzroud156 of course sent 200$ USD for the course fee to me paypal. next session start in September. see you then!
I need a compressor give me your address