How to Replace Vehicle Speed Sensor 1994-1997 Honda Accord

Buy Now!
New Vehicle Speed Sensor from 1AAuto.com trq.video/ib-1...
This video shows you how to install a vehicle speed sensor on your 1994-1997 Honda Accord.
Estimated installation time for a professional technician is approximately: 48 minutes
This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord
Tools you will need:
• Phillips Head Screwdriver trq.video/obLY...
• 10mm Socket trq.video/obQj...
• 8mm Socket trq.video/obQj...
• Air Blow Gun
• Pliers
• Ratchet trq.video/ochQ...
• Socket Extensions trq.video/ochk...
• Torque Wrench trq.video/obks...
• Cloth Rags trq.video/oSt-...
• Gloves trq.video/obnn...
• Petroleum Jelly
• Safety Glasses
Subscribe: / @trq
Check out our playlist:
Honda Accord 5th Generation 1994-1997: • Honda Accord 5th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@goyago12]

I did, thank you Sir 🙏

[@elgatogordo9523]

Great video 👍 Just what I needed to fix my speedometer issue.

[@rovilfrancisbactol156]

Good day sir, I already replaced my speed sensor but still its not working in my gauge

[@BCG88]

Great video. For the 10mm bolt that is harder to access, do I need a swivel socket or is it possible to do it with a standard 10mm socket?
Is it worth putting anti seize on the bolts for the new replacement?
Assuming that my VSS is the original one, should I just replace the O ring regardless? If I should, does the VSS that I'm going to buy from auto zone come with an O ring or do I need to buy it separately?

[@JoshMatthew-x8z]

Are there two speed sensors