Very nicely done I have to say! I would be interested how you managed to get the registration at the MFK? As far as I know this is very hard if you do a retrofit.
Very nice conversion! I have just bought a Renault Twingo 2004 to convert it into an electric car but I have not yet found a supplier of a motor kit with battery. Can you tell me where you bought your kit? Thanks
Thanks! Haven't measured the time yet, I would say it's around 15 seconds. But it's not a racecar of course. I have something spicier in the making though ;-) !
@@REMICHANICS not too bad, I hope the tech will serve you well!! I personally think from time to time about getting a total of 90-120 hp in my Twingo series 1 but I think the bodywork needs to be updated since its not meant for such power. Some other parts as well. Great work, keep on going!! 💪🏼💪🏼💪🏼
Nice! But I also wanted to see it charge like shown on the thumbnail 😂 I doubt it will charge on a public charger with the Orion BMS disconnected so I would guess the thumbnail is more recent?
Thanks mate! Might do a separate video on charging. The BMS was of course connected and the battery closed up for the drive. But I had a problem with the charger at the time, and I subsequently blew the charger up while diagnosing. Waiting for spare parts at the moment 😬... VERY long leadtimes as you might guess! Cheers!
Very nice conversion! I have a 2001 Twingo and my speedometer is very different from yours. Did you changed it for something custom? I'm thinking of making one using ODB2 as a data source.
Hello Gabriel, yes the speedometer is coupled with the inverter unit so it's a specific display for this drivetrain and it has nothing to do with the original display of the Twingo!
That's very nice! I'm think about it and I kept my Twingo I. I have one year to make almost the same. How can you help me? I write for you pm if you give a mail address. Thank you and best regards!
Perfect! How to start with my Clio 👌? Do you have list TODO to kick off the work?
Lovely conversion!
Thanks a million! Still need to sort a few things with the charger, but slowly getting there!
Congratulations, very nice convertion.
Thanks a million! I have another one with a 1954 Renault 4CV on the channel which might be interesting for you too!
Very nicely done I have to say!
I would be interested how you managed to get the registration at the MFK?
As far as I know this is very hard if you do a retrofit.
Très intéressant! Have you had to lose the spare wheel to fit the battery in? Would be good to see how the charge port is installed.
so cool. approximately how much did it cost u?
Very nice conversion!
I have just bought a Renault Twingo 2004 to convert it into an electric car but I have not yet found a supplier of a motor kit with battery. Can you tell me where you bought your kit?
Thanks
Nice!!!💪🏼💪🏼💪🏼 so, what is the 0-100 time? 😁
Thanks! Haven't measured the time yet, I would say it's around 15 seconds. But it's not a racecar of course. I have something spicier in the making though ;-) !
@@REMICHANICS not too bad, I hope the tech will serve you well!!
I personally think from time to time about getting a total of 90-120 hp in my Twingo series 1 but I think the bodywork needs to be updated since its not meant for such power. Some other parts as well.
Great work, keep on going!! 💪🏼💪🏼💪🏼
Nice! But I also wanted to see it charge like shown on the thumbnail 😂 I doubt it will charge on a public charger with the Orion BMS disconnected so I would guess the thumbnail is more recent?
Thanks mate! Might do a separate video on charging. The BMS was of course connected and the battery closed up for the drive. But I had a problem with the charger at the time, and I subsequently blew the charger up while diagnosing. Waiting for spare parts at the moment 😬... VERY long leadtimes as you might guess! Cheers!
Very nice conversion! I have a 2001 Twingo and my speedometer is very different from yours. Did you changed it for something custom? I'm thinking of making one using ODB2 as a data source.
Hello Gabriel, yes the speedometer is coupled with the inverter unit so it's a specific display for this drivetrain and it has nothing to do with the original display of the Twingo!
That's very nice!
I'm think about it and I kept my Twingo I.
I have one year to make almost the same.
How can you help me?
I write for you pm if you give a mail address.
Thank you and best regards!