$900 dirt bike KTM 250SX complete rebuild - time lapse
HTML-код
- Опубликовано: 28 дек 2018
- Racer X video: • Racer X Films: 2004 KT...
Hey guys, this is my $900 dirt bike 2004 KTM 250sx which I rebuilt from ground up, it took almost 5 months to finish. I have over 20 videos on the channel documenting the rebuild in details, showing all the work and parts. This video is a an edit of all of them put together and showing this dirt bike build from the time I bought it for $900 till the finish. You might have seen the same footage already in older videos, hope you will enjoy it. Let me know what you think! Take care!
Music:
Track: Janji - Heroes Tonight (feat. Johnning) [NCS Release]
Music provided by NoCopyrightSounds.
Watch:https: • Janji - Heroes Tonight...
Free Download / Stream: • Janji - Heroes Tonight...
▽ Follow Janji
SoundCloud / janjimusic
Facebook / janjimusic
▽ Follow Johnning (vocalist)
SoundCloud / johnning
Facebook / johnningoffi. .
Music track: Love & Fame
Artist: Consinity
www.consinitymusic.com/
• Song: Extreme Energy (Music Today 80)
• Composed & Produced by : Anwar Amr
• Video Link: • Extreme Energy - Rock ...
KTM 300 dirt bike build details:
EGR
www.eric-gorr.com/
Full Engine build make 250cc into 300cc with porting and head mod and engine assy
Vertex Pistons
www.vertexpistons.com/
300cc Pro Replica Piston kit (ring, pin and clips)
Hot Rods
www.hotrodsproducts.com/
Complete Bottom end kit
Includes complete crankshaft, main bearing seal kit and complete engine gasket kit.
Lectron
www.lectronfuelsystems.com/
Lectron 38mm high velocity Carb With Throttle Cable
IMS
www.imsproducts.com/
Large Fuel Tank
Supersprox
www.supersproxusa.com/
Rear Stealth Sprocket
Front Sprocket
O-Ring Chain
Uni Filter
www.unifilter.com/
Two-Stage air filter
Hinson Clutch Components
www.hinsonracing.com/
Clutch Cover
FMF Racing
www.fmfracing.com/
Gnarly Pipe
Turbinecore 2 silencer
MotoTassinari
www.mototassinari.com/
V-Force 4 Reed Cage
Acerbis
www.acerbisusa.com/
Front Fender 2013
Front # plate 2013
Shrouds
Fork guards
Rear fender section
Hand Guards
Mud Flap
P3 Carbon
www.p3carbon.com/
FMF Pipe carbon guard
Carbon Skid plate
All Balls
www.allballsracing.com/
Clutch Cable
Rear Brake Pedal Rebuild
Shock Bearings rebuild kit
Swing arm rebuild kit
Fork Rebuild Kit
Shock internals rebuild kit
Fuel Valve Rebuild kit
Chain Rollers
Counter Shaft Rebuild kit
Dunlop Tire
www.dunlopmotorcycle.com/
AT81 front
D803GP rear
Works Connection
www.worksconnection.com/
Hour Meter and mount
Brake Caps
Stand
Rotating bar Clamp
Steering Stem Nut
Air Caps
Fork Air Bleeders
DeCal Works
www.decalmx.com/
Semi-Custom Graphics kit
Pre printed number plates backgrounds
Trail Tech
www.trailtech.net/
Kickstand
Endurance 2 read out and mounting
TM Designworks
www.tmdesignworks.com/
Chain guide and chain block
Moto Seat
www.motoseat.com/
Custom Cool seat cover
Tusk
www.tuskoffroad.com/
Front Rotor
Rear rotor
Hardware for rotors and sprocket
Complete Wheel set
Front Brake line
Brake pads front and rear
Shifter
Brake Pedal
Rear Rotor Guard
Bullet Proof designs
www.bulletproofdesigns.com/
Radiator Guards
Fasst Co
www.fasstco.com/
Foot Pegs
Fasst Bars
Handguard frames
Race Tech
www.racetech.com/
Suspension Re-Valve and set up
Cycra Racing
www.cycraracing.com/
Front Fender Bracket to allow updated year
San Diego Powder Coating
www.sandiegopowdercoating.com/
Sandblasting, powder with super-durable clear, and “race prep masking’
Vapor Honing Restoration
/ vaporhoning.. .
Blasting of Swing arm, Triple Clamps and Kick Starter
KTM direct parts
KTM OEM Frame Guards
KTM OEM Air Box cover
KTM Powerparts Lock On Grips
KTM Powerparts Clutch Master Cylinder Cap
T-shirt:
www.dirtniron.com/product-pag...
www.dirtniron.com/
/ dirtniron
/ dirtniron
dirt bike build KTM 300 build Авто/Мото
hey guys, thanks for all the comments and feedback! if you want to see more from this build head over to my KTM 300 playlist, I recorded every step of this build in details, there is over 25 videos. I think some of you might find it interesting. This video is an edit from all the videos I did during 5 months period as I was building this bike, you can see all the parts and know why I chose those parts, etc.. enjoy and thanks again! here is the playlist: ruclips.net/video/4JIlG6q0j8I/видео.html
Bike looks great 1 new subscribers
Welcome on board Ed!
Regards, I would like to know if you can help me get a gearbox for a KTM 2 stroke 250cc enduro from the Dominican Republic.
thank you.
Can i try that for free..🙂
GOOD BRO
is no one gonna acknowledged that 900$ was an absolute steal for that bike
yeah really... People ask $2000 and get it for a bike in that condition in my area.
Capt Jack Jeez man where I live in western pa people would be asking 2500+
Yea, it was great find, it did have few things wrong, for example coolant leak from cylinder base gasket, etc.. I bought exactly same bike 2004 KTM 250sx few years ago, bike was in great conditions and I paid $1800 ..
California has good used dirt bike market, bikes are cheaper..
I've NEVER seen shit for 2 stroke MX bikes under a grand. For $900 you get an 80 or MAYBE a 1991 KX125 that needs work. Most 03-05s are in the $2 - $3k range and its usually a KX250 or CR250, not a running 250SX with a pipe in great shape. That bike is basically a fluke and an impossible thing to score again.
@@rickfeith6372 My KTM SX 125 2016 was 3800€
900 dollars? you robbed the guy! Those are the deals i like!
ya, do ya think!!!!!!!
In Germany you'll pay atleast 3000€ and if you want a decent bike you will pay around 4/5 grand. 900$ for this bike is a absolute win.
@@paul6775 Musst probefahren und nen gefakten Pfand hinterlassen
@@paul6775 ja Mann isso
900 for a 2004 sx is not that uncommon, at least where i live the sx is pretty cheap compared to the exc, because you cant take it on the road.
I bet in the condition he bought it in would cost like 2500 or more today
Man I really appreciate you for taking the time in making this video. I am a retired Vet and on a tight budget, but always planned to build my own custom bike based on a similar type bike. I was a little nervous about spending above my budget for tools, but thanks to your video I was able to see I have everything need already. And the process is not as bad as I thought with the newer bikes. I decided to go 100% ahead with my project thanks to you.....please keep up the great work.
Glad it was helpful! Best of luck Bill!!
Man.. if i hear "we are heroes tonight" one more time. I swear to god..
great video man! Awesome build!
haha,
you dont want to be hero tonight? ;)
.. next time I will choose better songs for sure. Glad you like the build man, thanks!
Riiiight omgosh
It went for a reallllllllly long time!
I almost stopped watching because of that song
Did you by any chance hear that i have been flying from town to town? Actually , I went from London to Taiwan. Yes, indeed i tell you, i have been all over the globe. With one mission. Protect your soul. I am a hero. Tonight.
I would've been fine with that bike from the beginning lol
:)
Sane
Same
Honestly
Wouldnt anybody?
Thanks for filming this! Really awesome seeing the whole process!! Bike looks super SICKKK! !!!
thanks man, glad you like it !
Incredible!! This is one of the best build vids out there! Bike looks fantastic and what a complete transformation!! Please continue to make more rebuild videos like this!!
Thanks glad you like it! Check my main channel page for more build videos
I’m a high school student right now. This is what I do for a living, buying craigslist dirt bikes and flipping them. Videos like this are awesome to watch when the bike market has slowed down. Thanks for the great video!
Thanks brother! What is your latest project?
I doubt you could make a living off of that.
Mr. Swoleson you could easily make a living off this dick head
@@gage9178 people do that with cars all the time
I have also been thinking about do this but also with snowmobiles and mopeds... basically small engine stuff
Now this called a complete rebuild, not those that put some spray on it and that's it!
Congrats
thanks man, glad you like it!
What about the motor?
Steve Booth that’s what I’m saying
Lol true
Sweet!! Looks so much better with orange frame!
Well done, it looks amazing!
Thank you! Cheers!
the motorcycle is great but the workmanship is spectacular. I've seen it 9 times. Watching again. Thank you.
thank you, glad you like it :)
900$😳 were I live that thing wouod he like 3000$
Hahahaha same thing in my country
No, if it was in this condition
@Gaming Boy dude a new sx is 8299$
jacob fehr there an 2008 250xcw going for 4300$ up here in New England where Ktms are like gold
Frank Foot986 oh yeah, I’m in new England too and there seems to be an price hike
for 900 bucks that thing looked pristine
You left out the $5500 in parts. Haha
@@bkm72 he's talking about before he sunk the cash and time into it.
That's not including everything he bought to rebuild
Yea it’s a deal one of those here we’re I love would be at least 2k or 1,500 that’s a deal and it’s in perfect conditions to ride basically
A ktm in that good condition... You would be finding hard for it in our country
Love these before and after builds.
thanks Adam, glad you like it!
so thankful for the inspiration! looks beautiful! everyone deserves to have fun doing what they love! we need more people doing this! why let goood things go to waste? Much love ❤❤❤❤👍
Thank you Tyler, appreciate it.
$10,000 later
Hahahaha, yup. Could've bought brand new for cheaper.
It’s not only about the money, it’s about the connection with the bike.
He made a lot of youtube and especially this video
Its a hobby/project, its about having fun. Money doesnt matter.
No lie
I see a doggo, I like
Found the zoo
I'm currently building a 2004 200cc exc this is all new to me and this video is what I was looking for! Brilliant 👏
Glad I could help! I have long playlist showing everything in the detail: ruclips.net/video/4JIlG6q0j8I/видео.html
Damn I can only imagine how the guy that sold it to you for $900 is feeling now.
;) he should be happy I think!
@@dirtniron and jealous.😆
Probably fine considering the guy probably put another $5000 into this bike minimum.
@@connorhd3201 yeah but he's probably thinking damn If only I put some effort in to it...
He probably spent like $3000 dollars or more in it tho
Awesome build!!
Ain't no way this bike was 900 bucks. The FMF alone is 400.
yes, I got lucky. It was 900 ;)
Thats the best part about complete machines.. Its cheaper to buy a complete machine then individual parts lol. Hence why parting out makes the most money =)
Gxttr8infrastrutture
In Italy go to 500 to 1000 in good condition
If that was 900 us it was for nothing a no you minted it but it looked pretty good to start with would of pulled in 1600 2000 UK easy
I would be so scared doing that cause I would probably lose a part
it isnt that hard ;) specially when you have a video how you took it apart
You should have a shallow bucket, like a oil draining bucket, (for when you change your oil) and you’ll be able to put all the screws and stuff, and a towel with parts, it’ll be hard to lose anything
@@natebrank4240 ehh, he seems to know where everything is
John Millar if I did it when I put it back together it would blow up 😂😂😂😂
I would forget where the parts go lol
it's super nice the complete overhaul that you did on that oldie one day when mine turns ugly i can also follow this example was pleasure to watch it
The fact how i was able to watch this video without getting bored is crazy, i was honestly vibing to the music the whole time
All my life hated 2 strokes..
Until now, WHAT A MASTER PIECE! you are an artist and a genious! Congratulations from Colombia!
haha, thanks Alejandro! ;)
Why hate the 2 strokes they are so much fun and plenty reliable if you care for them properly
@@kx250braap they sound awful
@sexy gorilla I'll give you that
@@brain1187 yea... My opinion is 4 stroke sound better then 2 so..
I immediately see the love for the doggo and clicked like :3
thanks Erik ;)
Same I did that too!
Dirt N Iron same
It’s these kind of videos that give me confidence and motivate me to work on my bike. This is one of my favorite channels ever!😁😁
Thanks man, glad you get little motivation here 👍
I'm stunned.....amazing job, I love it
I'm glad you like it, thanks Guillermo!
NOW THIS, is what RUclips is made for. :-D
love this comment! :) thanks brother!
True
But....but this video represents the patriarchy!
And the patriarchy rebuilds sweet arse dirt bikes!
True
Never seen a better time lapse rebuild! nice work nice vid! greets from germany...cheers mate
Thanks a lot mate, glad you like it ;)
2:19
did he come to say hello ?
🤩
The build is sick! Great video. Keep the content coming!
thanks bro, appreciate it!
I would have much preferred just silence or a couple songs haha
Yeah that first song got me frustrated so much that I turned my volume all the down
Th3R34lic73co 1 we are hero’s bro
Turn volume off?
colten6996 silence is even more annoying
Th3R34lic73co 1 me too
I don’t like the white fuel tank but apart from that the bike is badass!
thanks Jack
Thats a desert tank my guy
Typical desert tank. Not pretty but a lot more miles on a fill.
Absolutely amazing video. The amount of work you put into the build and taking and editing the video is incredible. Thank you man, it’s awesome watching the whole process! Kudos man 👍✌️
thanks a lot man, glad you like it!
Wow! Great job man. Youre a great mechanic and rider (and video editor too). Congrats!! Very inspiring. God bless you
thanks man, glad you like it ;)
I’ve never been so excited to watch a time lapse video of anything in my life.
You’ve done a hands down amazing job
thanks a lot Andrey, really appreciate it! :)
Ktm should sponser him
I would love that ;)
Somebody tag KTM!
Love the vapor blaster setup 👌
Hell yeah, looks awesome!!!!!
It's so refreshing to see a RUclips build done by someone who has all the tools and knows what to do and uses quality parts. It's a rare things I've found
thanks Ryan
Thank you for this video, really calming to see you just work on the bike and not talk useless crap.
Just spectacular..no words..thanks very much from Spain! Big hug
Thank you very much! glad you like it, greetings to Spain!
It was already a nice looking bike, hard to believe 900 bucks. Wow awesome job, it's beautiful.
thanks Keith, appreciate it!
I really enjoyed those 39 minutes. Great bike and great video!
thanks a lot! glad you watched it all ;)
Yo this bike is a beauty😍
thanks man!
Seen you again. Lmao. You are everywhere
Lukas Radzimski haha yeah
Yorhg10
Wow
Bro, that was so satisfying
I love how it turned out I love your videos keep up the great work and content!!!!!👍❤✌❤!!!
Thank you! Cheers!
in switzerland you pay for this bike in this condition 2000
I got lucky
In Czech Republic it would be 2500 at minimum 😂
@@PKTMProductions já už se snažím tak čtyři roky najít motorku, na které bych mohl začít a nechci žádnýho Číňana, tak se dívám na yz85ky a v ne moc hezkým stavu za 40000,-... Zasraná Amerika tyvole tam mají všechno levnější 😂
@@mirrekku Přesně tak :DD Já jsem našel KTM 300 EXC v pěkném stavu nedávno za 70 tisíc, ale do 1 hodiny bylo prodané :( :DD
by d way what is your currency?
I wish I was smart enough to work on projects like this
Walmart Fanatic just start small
You're smart enough, you just need to put in the effort
Wade Hudson it doesn’t happen in a day it takes time, you learn as you go
Bit of a late reply but I started with lawnmowers then to go karts then to put bikes then dirt bikes and I now work as a motorcycle repair mechanic for top end bikes and I just finished up on a ninja h2 for a guys dream bike build
@AlaskaLive not my company so the boss wont like it I am looking into my own business but I cant because of corona so I'm going to try next year
Awesome !!! Nothing like transforming and rebuilding any motorbike... Well Done
thanks Michael, glad you like it!
Best video I’ve watched all year. Nice work!
Wow, thanks!
You make everything you do look so easy and chilled its never like that with me.
well, I choose what to show on camera ;)
I hope you sent this video to the previous owner to show them how you bastardized their old bike. Just kidding. This was pretty amazing since whenever I buy a bike, I just take it home and ride it straight away. I can see how this would be much more satisfying in the end. Seriously, great job and cheers!
Beautiful build, great work and restoration. Big love ❤️
Thank you! Cheers!
the second song that’s played kinda sounds like Love Song by Tesla! i love it. great build!
i love every step you did on this bike, so smooth
Thanks, glad you like it!
you've been able to glue me to the screen for 40 minutes ... congratulations, fantastic video!
Thanks a lot for saying that Manuel! I am glad you enjoyed it :)
Your not the only one mate I’m stuck on the toilet , I have a bike the exact same as how it he brought it in my shed I’m resorting
Looks brilliant. It's amazing what a clean and some paint will do.
thanks Howard
Love to see in November 2020...awesome sound track
That is passion for the motor sport right there!
This has been in my recommend for a couple days now, thought id just watch it to see what it was all about. Glad I did, awesome build! SUBCRIBED!!
thanks Zac and welcome on board! :)
Wow ! What a great build ! Amazing looking bike !
Thank you very much!
Loved the background music sire❤ very satisfying to watch . Watching from South Korea 🇰🇷🇵🇭
thanks ;)
It's so cool to see the progress. Well done man!
thanks Niklas!
You can see the joy he has talking about the build. He made connections with people too. So much so he wants to acknowledge them on the bike. I think this bike project is beautiful in so many ways. Well done!
Thanks a lot Scott, you got it right I met great people and enjoyed the build very much. Appreciate you seeing all that in the video, well done! ;)
this is my 7th time watching this same video over and over again its so well made
thanks for watching!
Man this is such a good video I watch it almost every day
thanks man!
Such an amazing transformation! Well done!
i have the 2018 KTM 250 SX and it's nice to see what other people do with a build.
This vid makes me relax
I like when the dog came in for a hug and say hello. I’m like that in my garage on the bikes and both my dogs pop in and out to say hello lol
Amazing!! This is exactly the kind of content I've been looking for!
Thanks, I am glad you like it!
Ciodmreltlrletlgltlr😎👔
Dfmfldltlrlrtlflrl
Super nice build! Its nice to see guys put work into building a nice bike as apposed to just buying the latest greatest.
thanks Rodney, glad you see it that way ;)
One of the greatest trail bikes I've ever seen
thanks a lot Mason, appreciate it!
GREAT BUY AND SUPER INFORMATIVE BUILD VIDEO.
Love this bike, wish I could complete a build like this
Great build! However, the music was so terrible that I had to mute it a minute into the video. Horrible music, but super awesome bike. I love the smell of 2-stroke in the morning.
Awesome build !
Like the method for pressing new bearings into swing arm, never seen that befor..
Everyday a school day 👍
thanks man, glad you could pick up some tips ;)
Congrats on getting the funding to do a ground up build. Also WAY TO GO on knocking a build outta the park! I'll bet she feels as good as it looks!!
thanks Jason, glad you like it! She feels pretty good, you should check out first ride video ;)
Perfect completely rebuild , congrats!!! Nice and clean jobb
thanks Bachir
That's one hell of a deal , we just got a 1992 cr250r beat up for $800 to do a total rebuild/restoration on..Great job..
Thanks for making the vid. Excellent job.
Glad you like it 👍
For me this bike looks and sounds awesome. Thanks to You I stay motovated :)
thanks Tomasz!
Great vid. Especially the end shots. Nice edit! Nothing like a two stroke dirt bike.
thanks a lot, appreciate it!
I only just know seen this build, “after watching the recent YZ250 build” like I said before...totally amazing work you do Rado
thanks a lot Mike, glad you like these full build videos. check out my main channel page, I have more projects like there: ruclips.net/user/dirtniron
Awesome build and thanks for a quality vid.Just finished a 250sx off-road convertion with even more mods.Very time consuming but but worth it.
Right on Jeff! where can I see it ?
This video is awesome! You made that bike look incredible.
thank you, glad you like it!
The part were u loved your dog with this music made me smile😍
It’s beautiful man great job
Wish I can find a $900 bike that clean. That was a steal you got!
yea, it was a great deal!
I don’t like it, but I LOVE IT... 🔥🔥🔥
Linda, parabéns pela excelente restauração...!
Beautiful work and exceptional attention to detail.
Thanks Luis, glad you like it!
Best rebuild video I’ve seen
thanks Cody, glad you like it!
Can watch this for hours! Thanks from Sweden.
Thanks a lot bro! Oh and btw, I ride Husaberg ;)
@@dirtniron That´s the way it´s shoult be =)
That's one hell of a clean bike for 900, what a deal.
That was awesome!