MM300 case for SKX007 Parts? - NamokiMods MM300 Case Build + Review
HTML-код
- Опубликовано: 10 сен 2024
- In a collaboration with NamokiMods, Dan builds in the NMK908/MM300 case along with their custom MM300 bracelet in an attempt to combine the styles of SEIKO's MM300 and the modern 62MAS. This video is a full build as well as a review of the parts.
Thanks to NamokiMods for sending the case parts for this build!
Parts sent includes:
MM300/NMK908 Case
MM300 Bezel
SKX Sapphire Display Caseback
SKX007 Signed S Crown
Flat Sapphire Crystal with Clear AR Coating
SKX007 Lumed Chapter Ring (black) [Not used in this build]
Set of Gaskets and Click Spring
-------------------------------
Affiliate Links for Watch Mod Parts: www.namokimods...
Use Code: ITSANOTHERWATCH5 to get 5% off orders over SGD40/£23/$30
( code excludes complete watches, Bergeon tools, and movements)
-------------------------------
Parts:
MM300 Case: www.namokimods...
MM300 Bezel: www.namokimods...
MM300 Bracelet (3 Link): www.namokimods...
Display Caseback: www.namokimods...
62MAS Hands: www.namokimods...
Coin Edge "S" crown: www.namokimods...
SKX007 Lumed Chapter Ring (Black): www.namokimods...
---------
Bezel Insert: www.aliexpress...
---------
Music Credits:
Vladsorensen Hizuvi - Liberty City (Royalty Free Planet)
Neon.Delfector - StarDreamer (Royalty Free Planet)
Aries Beats - Celestial Bodies ( / aries4rce )
Lilac Skies - Corbyn Kites (RUclips Music Library)
Birds - Corbyn Kites (RUclips Music Library)
Cyberbear - Swift Electric (Royalty Free Planet)
in my case, I worked with a Chinese Company on the MM300 watch case and a Seiko dial SL 35 . And guess what , the dial was made for an ETA 2824-2 . The end result is that I owned now a MM300 with a genuine ETA 2824-2 movement. Accuracy is COSC standards !
Does the ETA fit perfectly, or is some type of "shim" needed?
@@LeeePowersThe ETA movement fit into my Chinese MM300 case.
The best looking mod I’ve ever seen
Love that asmr bezel action, and top video as always, so cool to go along on the journey of the builds with you.
I'm glad I found your channel. I think I'm ready to make my first attempt at a build.
Man, you're slowly becoming my favorite channel. I've essentially been living vicariously through your heimdallr and the skx007 video waiting to be able to order my own heimdallr! Keep up the amazing work!
I was too lol. Just got my Heimdallr though, was not disappointed!
@@mitchellsmith2099 I'm honestly kind of at a crossroads between buying it and not. Kinda got this mentality where I really want something and then don't buy it because I "don't need it" which is true but I also really wanted the classic look of the 007 without having to pay double what it's worth and getting the original. Either way, enjoy the watch!
Like I said I’m happy with it! Not too expensive so you can’t go wrong, but unless your in love with it and can’t stop thinking about her, don’t marry her. Or buy the watch, both apply:)
Awesome build! And thanks for including the parts of the process that don't always go as planned. Nice to know we're all human... And pick up some new problem solving solutions
I love this channel. Every time you start a project a feel all the excitement and tension that goes with it. I got a homage Seiko MM300 and I know how beautiful and classic this watch is. All in all thanks for delivering so brilliant videos.
Cool Build! I am considering this case to do a 6215-7000 build.
Bro, I love your enthusiasm, creativity and the meticulous attention.
My only objective is the Case Back. That Glass caseback looks cheap and doesn't compliment your work. A GENUINE OEM case back would have been perfect.
Greetings from USA 🇺🇸
Nicely done mate. Unlucky with the scratch on the insert but that's what makes a build exciting, the constant threat of a gaff. I look forward to more great content. Cheers.
Gutted was just about to build using this bezel and case only with a mother of pearl face marine master humm ok I'll try the titanium instead with designer black white hands keep it up you saved me a fortune in watches was taking ages to get my watch collection together as I like unusual divers I'm on my second this month lol shame I carnt send you pics maybe you could make it an option for us new builders asking for a friend 🤪
Well done dude.. videography well edited, and interesting content. You'll grow into a huge channel 1 day =)
Great video! Another 5 years of watching your videos I might get brave enough to try to build one!
Hi mate. Just found your channel. Loving this build - the dial/bezel combo looks so clean! 🙌🏻
Subscribed 👍🏻
I was just looking at this case and was wondering if anybody had written or filmed something about it. And then I see you did it and I missed it while traveling. Super interesting vid, as always. Thanks!
great vid. Thanks Dan
Great video, I can relate to having my builds not going smoothly lol
Amazing work, not only the building process but the camera and sound are really nice.
It's. Nice that you tell everything about the process of building not just a perfect ride
Really enjoyed this review and watching him do this build! He does an excellent commentary and the photography was quite good. Now I want to do another 300 case build from namaki 👍
That looks awesome mate, nice work! That steel bezel insert with the 62mas grey dial is a stunning combo.
Love your show enjoyable and very instructive
Ooooof i'm loving this, brilliant video!
Really liked the extra commentary and discussion on this vid. The bloopers show you're human and therefore I, as another human, could also blunder my way through such a delicate looking process. Great vid.
Request: review and modding the 90$ Alibaba Pagani designs watch.
Thanks, Buddy, Really enjoyed this vid, I'm planning to build a 62Mas with Namoki and DLW parts, so good to see some of the parts I will be using, being used.
Your process is invaluable as I'm prepping to do my first custom build. Love that MM300 case vs others, just a bit disappointed with bracelet options, though Strapcode has one that'll do. UPDATE: I ordered the Namoki MM300 case, but the MM300 bracelets from Strapcode & the one from AliExpress that matched the stock Seiko would not fit that Namoki case. So I just ordered the Namoki one, so another 2 weeks of waiting now. Cheers!
I hope your build goes well! I recommend checking out my GMT build that I posted recently on the channel, since it has some additional information about hand pushers that might help you. Its something I didn't know when doing this video.
@@ItsAnotherWatch So I am in it now, e-thing went great, the hands, chap ring, bezel and insert went on fine, though the second hand was a challenge, but aside from the bracelet probs the crystal keeps crushing the gaskets (funny how the Namoki gaskets have that little kick-in edge at the bottom), AND in the USA any additional parts take more than 2 weeks. I'm beginning to think this MM300 case was a mistake? Wish I could contact you for personal advise, but have worked with SVK on other projects so maybe he could help me out? Cheers!
@@wrthrash Unfortunately Crystal setting for me is the thing I'm not great at. My recommendation would be is to go on AliExpress and order a bunch of crystal gaskets since you can get 10 for cheap. Here's a link: www.aliexpress.com/item/1005004098563832.html
The listing says: 31.5 x 1.4 x 0.35mm for SKX007. I've never actually measured the gaskets, but I assume this is correct.
Just make sure that you're crystal is the correct side up (if its a flat edgeless crystal might be tough to tell so try flipping it over and seeing if it goes in any better, but if its a domed or sloped edge then ignore this). Try and rest it on top as flat as you can get it before pressing it down.
I don't really have much advice for getting it right since I usually just set it on top and press it in hoping for the best. But at least you can have several attempts if you buy a bunch of gaskets to practice with until it goes in properly.
Sorry I couldn't be more help.
Remove bezel inserts in 5 minutes with no damage. Get lighter fluid like a zippo uses and you just need enough to put the watch face down and it eats the adhesive away great. I have soaked every part I can and examine under magnification and it doesn’t hurt anything except adhesive tape.
Man that's nice! Great work!...minus the 50 scratch on 😉 That's a perfectly styled Marine Master.
Beautiful build bruv !
Beautiful build 🔥 will make one similar
Love your videos I have that many broken and spair parts it would be brilliant if I could mod some watches could you put a link up for the things you need to start modifying my own watches
Looks really pro I have mm 200 steel bezel they do scratch but you don’t really notice well done
Fantastic video, love the background music! I am planning a build with the same namoki case and steel bezel, except with a SBDY043 dial, a white chapter ring w/ markings, and MM300 style hands.
dude, release your videos more often. you are good at 👍🏾 Start your own Instagram so that we can follow your work🙏🏾
I might be too late with this comment but where did you find the early version dial? (Without the lumed marker at 3.)
Great video, best of luck with the channel.
So nice I have been watching your channel and must say it looks so simple when we are watching you building those watches. This build is so nice that I would like to do the same for me :-) however I wonder where you get the Seiko dial could you please point me in the direction on where to look
Unfortunately there's no consistent place to get them, Seiko OEM dials are something you have to search around for, looking at Seiko models and then identifying the model number, then searching that number, for example "SPB185 dial" and then seeing what pops up, you can also search Seiko OEM dial on AliExpress to find some. Its just about digging until you find what you're looking for.
Nice mod. I am also looking for a gray sunburst dial for my first mod. Finally decided to mod my invicta 8920
Hi mate how waterproof would you say the watch is 100m? 200m?
Great build but I wouldn't use the movement holder whilst putting the hands on. You could push the pinion through as there is no support at the back of the movement.
That case would looks so much better without a rotating bezel
hello
l love this build!
where did you get the dial from?
I really enjoy your videos
thanks
love your channel
Keep the mods coming! 👍
beautiful build !
I find thise 62mas handset a bit to long for dials with minute markers printed on them.
Brother, what is the total spent money for buying all parts?
Noob here. Thanks for your videos. Are there any other parts suppliers that are good? What other watch makes are worth modding?
Thank you.
Great post. Suscribed. Another video please..
The loom on the hands doesn't match the loom on the dial
Dan, what that gold watch you are weraing there? Why not do a "wrist check" at the start of your videos? Great videos, I've just clicked subscribe.
Its the SEIKO SNK366K1. I've got a short video reviewing it here: ruclips.net/video/YfN6h_2Lcf4/видео.html
Will it fit the Casio duro 106?
It’s not really an MM300 case if it uses a screw down case back then, is it?
Where do you get the OEM case back?
Great build and video. Fantastic work. Is the exhibition caseback adding some thickness to the watch? Do you think a standard caseback could shave a MM or so off the overall height? I’m thinking about of one these with a domed crystal and would love to keep under 14MM. Thanks!
Can u tell about the wr of these modes.i really appreciate it
Great channel ! 👍
DeMystifying!
I just use Loctite for the screw stem into crown.
Hi mate, love watching your videos (subscribed)......QUESTION though, you started the build with an NH36 it looked like the crown was at the 3 o'clock position but the case crown position is at 4 o'clock did you adapt the dial to suit this variation and when you do this does the date line up?
I removed the dial feet, allowing me to manually align to the 3.8 O'clock position. The Date wheel aligns at both 3 and 3.8 O clock so it doesn't need to be changed, but the DAY wheel on an NH36 would need to be changed to a 3.8 Aligned one to line up properly. The dial it self doesn't need any other modification other than removing the feet and attaching it with dial dots.
Looks great!
Question : how to place the crystal gasket correctly?
The crystal gasket should have a lip on the bottom of it (sticking outwards slightly on the bottom inner side of it) make sure you put the gasket in the case with this at the bottom. Once you push the gasket in all the way around it should sit where it needs to be, and the crystal will press in and sit on that bottom lip.
@@ItsAnotherWatch thanks! Then I was doing it right. I had doubts, but it's clear now. Thank you
Is the case fits with 7s26 movement?
Yes it does, you just need to make sure you buy the caseback that is for the 7s26 with its black spacer, rather than the taller caseback that's made for the NH36 and the grey spacer. Namokimods have labels on their product page for casebacks that say if its for 7s26 or NH36.
i can co firm namoki have great customer service after just 2 months of ordering
A guy on youtube showed how he remove the dial feet with a pin vise.
What is your trick on putting the second hand that easily on?
I pick up the end of it with a piece of rodico and kneel on the floor to have my eye level looking at the movement from the side. I hold the second hand over roughly where the pin is and gently move it against the side of the pin until it moves above the pin and slightly catches, then I press it down lightly so its on there. Then I press it full down onto the pin. I find that aligning it with the pin from the side is easier because you can see when it hits the side of it, and when it slides up onto the middle of it. Doing it top down makes it difficult to see if the hand is actually going onto the pin, or being pushed down beside it.
@@ItsAnotherWatch thank you very much
Can you build me the same thing?
Dear where can i get this dial
www.aliexpress.com/item/1005002814258874.html It's listed here among several other OEM dials.
Make me one please!
Hi buddy l, I love your videos, quite good and relaxing to watch. how can I contact you for some advice? Thanks
Thanks! You can head over to my channel and go to the About Tab and find it under "Details".
Namokimods - Where you are forced to pay more for every individual piece than what you pay for the whole kit elsewhere, for exactly the same thing or better...
dont like it, looks like a mismash of 62mas, skx and sumo.