Perception, the world is going to hell in a hand basket. Reality, people like JW are making it a better place. Really enjoy your adventures. Much respect sir.
Hi Jonathan. Awesome video my friend and a huge thanks for the hard work you put into making your videos and that's an awesome find. It will be a gem after it's brought back to life.
Man Jonathan, she's got 70s street machine written all over her. The wheels look good on her and worth a good cleaning and paint if you got all 4. 1 Hell of a find!
Nice, I like it. Takes me back to my 1st real job getting taxes taken out. I was doing maintenance work on a small resort. I drove around in a late 40's, I believe, GMC, maybe, panel wagon. 6 cylinder, 3 on three tree and a milk crate to sit on. Thanks for sharing.
I can hear the rap of the Fenton dual manifold with twice pipes. They're making water pump conversions for the later 235 to go in the early cars. A few outfits are making full pressure conversions for the "Babbitt Beater" engines. What fun. I had a '54 sedan delivery years ago. It was set up for camping.
leejimbo .. I was getting ready to say that when I began reading the comments and came to yours ! I think Junior's cars were a little older and a whole lot faster !! They sure couldn't outrun the Revenuers with that 6 banger !! I appreciate your comment and God bless you and your family !!!!!! EDDY
There were a lot of aftermarket helper springs that looked like that back in the day. Check out an old JC Whitney catalog you'll see them. Be interesting if they were factory. Thanks for sharing
Watching you clean up the mess reminded me of a tow you did recently where the drunk trash truck driver had left you more work than the tow was worth. Because that looks like it has a decent top that could be grafted on to another one but that would be a labor of love... did get a kick out of those fender vents that pushed warm air into the cab on the drivers side. I remember those kind of seats but never knew they went that far back... more like mid fifties seats. You will probably laugh at me but that camper project you have planed I have even had dreams about it, built ten different ways in my head... like a stove/sink in truck (small) and a fold out bench/bed in center an maybe another one that is right size clear to the back an some kind of little table for meals to the side door entry way. Enough of my input cause I ain't paying the bills on this amazing project but I wish I was young enough to still do this. Good video an don't listen to my gibberish. I sure enjoy the things that U do!!!
Looks like that one "suffered" quite a bit !! Might need "a parts car" to save that one !! Too bad the dash is all hollowed out. Hope the other one has the "deluxe radio" with the vertical "head/face".
You think maybe a bag of something was left on that hood to rust it through like that especially since though valve cover too. It would be awesome to have old logo still under that paint.
The rear springs were beefed up, so it could haul whiskey. LOL If you ever see a car in a garage or something with anything stacked on it, children's toys, household items, that lets you know, that car is never going to be fixed up, restored, etc. Might as well make them an offer.
Did you try to buy the pick up too? When I had the place to store stuff. I would go to a place like you were make an offer on all the parts, and vehicles. I would offer for lower (my end) price to haul off debris to the dump.
hey jonathan, my dads 50 chevy styleline has the same wheels. they are called "drag mags". made in the late 50s or early 60s i believe. they dont have a very safe looking bead on them, so radials might not work without a tube. his 50 chevy is also about that rusty haha.
Maybe it is a rare Sedan Delivery with the optional polyester plastic rear fenders! That is a pretty tired car. Still cool though. The contents of the inside building should be interesting, along with seeing the good car better. Thanks.
Those overloaders are not stock, and it looks like it has a 55-57 rear swapped in if its open drivetrain. Those buckets look like the originals. Those only came with one bucket standard, and the 2nd one was an option. I am in the rustbelt and even with all that bondo, I would build that in a second. EMS makes half quarters, rockers, and more for that car.
I don't know what you paid for the car, but if the grill is straight, not pitted could be polished out or re-chromed, it's worth what you paid for the car most likely. I've owned 4 53 and 54 Chevy Belair's. A repop cost, at the time, 1,499 bucks. I hear that now they are around 2,000 bucks. A good used original cost me 850 bucks. And I got lucky when I found it. And that was 9 years ago. I've seen just the centerpiece go for 300 bucks. If the grill is straight, you scored.
Back I the mid 70's my Mom slid her car in a ditch during a snow storm. 2 guys stopped and pushed he out, told her, the car has no weight in the rear end, so they threw 2- 50# bags of rock salt in her 1968chevell Malibu. Of course the trunk seal leaked. 2 years later the muffler fell off, she drove to her mechanic, he opened the trunk, there was nothing left, frame rusted threw, never got a new muffler, just a bill to tow her car to a junk yard. Times have changed, I don't think you loose money on a SS396 Bucket seat console Chevelle , anymore
Bought a 1950 chevy 5 window truck, Someone had put a bag off fertilizer on passenger side front of the bed. The truck was perfects except that about 12 inches of frame was missing where the bag was.
Pie wagon was the pizza del. Truck from the movie Hollywood knights. It was so popular that most people use the term for the old sedan deliverys. The 1 in the movie was sweet.
Perception, the world is going to hell in a hand basket. Reality, people like JW are making it a better place. Really enjoy your adventures. Much respect sir.
I really like the old Chevy stuff. Easy to maintain, easy to work on.
Hi Jonathan. Awesome video my friend and a huge thanks for the hard work you put into making your videos and that's an awesome find. It will be a gem after it's brought back to life.
Man Jonathan, she's got 70s street machine written all over her. The wheels look good on her and worth a good cleaning and paint if you got all 4. 1 Hell of a find!
Nice, I like it. Takes me back to my 1st real job getting taxes taken out. I was doing maintenance work on a small resort. I drove around in a late 40's, I believe, GMC, maybe, panel wagon. 6 cylinder, 3 on three tree and a milk crate to sit on. Thanks for sharing.
Work boy, work. Man what a mess to clean up. You need a corn scoop. Great save with the cars.
Can’t wait for the conclusion, love your barn finds....your videos are the BEST!
Thanks, Jonathan! Great video.
I can hear the rap of the Fenton dual manifold with twice pipes. They're making water pump conversions for the later 235 to go in the early cars. A few outfits are making full pressure conversions for the "Babbitt Beater" engines. What fun. I had a '54 sedan delivery years ago. It was set up for camping.
Thanks for the adventure anxious for next chapter !
With the overload springs... pro'bly a 'shine runner at one point. LOL Good stuff there Jonathan. She's definitely tired.
I love those ole delivery rigs ! .. ENJOYED
I like watching Johnboy videos that he does and the rat rods also that he does .
Great video thanks for sharing
Can't wait to see the other one in the light of day. Also to see if you find the other
2 mag wheels, Haven't seen any of those in a long time.
I love watching your videos. You do things that I wish I had the knowledge and guts to do.
I love them old chevys!
I LOVE watching your videos 👍
Jonathan, thanks looking forward too seeing the other 1 of the 2.
Another great video. Thanks for sharing.
with the overload springs could have been a moonshine runners car years ago ??????? cant wait to see the good one ,enjoyed the video as always
leejimbo .. I was getting ready to say that when I began reading the comments and came to yours ! I think Junior's cars were a little older and a whole lot faster !! They sure couldn't outrun the Revenuers with that 6 banger !! I appreciate your comment and God bless you and your family !!!!!! EDDY
Call it the “ Bondo Rod”. Must of used 5 gallons on the passenger side alone. Great video.
Great video Jonathan, looking forward to part 2 .
Cant hardly wait for part 2.
Jonathan when you were moving things out of the way and speeded up the video that was funny thanks have a good day👍😎
Would make a neat billboard for Winans hardware! Haha
See you running around , I want some of whatever your on ! !
Looks like someone stored a bag of rock salt on the hood of that car...similar thing happened to me in my leaky carport.
Would love to see them both saved.
Got your hands full JW!
There were a lot of aftermarket helper springs that looked like that back in the day. Check out an old JC Whitney catalog you'll see them. Be interesting if they were factory. Thanks for sharing
The 6 lug wheels were used thru '54 when the last enclosed drive shaft was used.'55 was a whole new model
I looked it up and it said 1949 and newer cars 5 lug. Truck till 70 or 71 where 6 lug
OMG, why can't people throw junk away !!! Panel wagons are great, that would make a cool rat rod...
I can't wait for the 2nd one to appear...💯
The wheels look like 1950's UK Cosmic. If they are, they are as rare as rockinghorse shit.
LMAO
Is it a sedan delivery or a storage shelf? You really put in a lot of work clearing off the trash.
EVEN THIS PARTS CAR SHOULD BE SAVED!! IT'S A RARE CAR!
Watching you clean up the mess reminded me of a tow you did recently where the drunk trash truck driver had left you more work than the tow was worth. Because that looks like it has a decent top that could be grafted on to another one but that would be a labor of love... did get a kick out of those fender vents that pushed warm air into the cab on the drivers side. I remember those kind of seats but never knew they went that far back... more like mid fifties seats. You will probably laugh at me but that camper project you have planed I have even had dreams about it, built ten different ways in my head... like a stove/sink in truck (small) and a fold out bench/bed in center an maybe another one that is right size clear to the back an some kind of little table for meals to the side door entry way. Enough of my input cause I ain't paying the bills on this amazing project but I wish I was young enough to still do this. Good video an don't listen to my gibberish. I sure enjoy the things that U do!!!
That was quite tricky getting it out. The other one looks to be a lot worse but I’m sure it will be a piece of cake for you.
The hardware looks original for the years
Sweet i like them crusty. Hope to get an email. Would like a shot at that one.
Looks like that one "suffered" quite a bit !! Might need "a parts car" to save that one !! Too bad the dash is all hollowed out. Hope the other one has the "deluxe radio" with the vertical "head/face".
You think maybe a bag of something was left on that hood to rust it through like that especially since though valve cover too. It would be awesome to have old logo still under that paint.
I think this guy where you picked this Chevy up is related to the missing garbage truck driver, or maybe the same fellow! What a mess.
That would be cool to make one of them a bike hauler for that motorcycle u got
Pie wagon straight axel gasser build
One day rat/hot rod build put it on a 4x4 chassis
The rear springs were beefed up, so it could haul whiskey. LOL
If you ever see a car in a garage or something with anything stacked on it, children's toys, household items, that lets you know, that car is never going to be fixed up, restored, etc. Might as well make them an offer.
"For Man he must haveth, much shit he shall stacketh."
I can't wait for the first start.
NASCAR mode for cleaning as well? You are a brave man to not wear gloves but I guess it's still too cold for snakes...
that would make a good hot rod with small block chevy
Did you try to buy the pick up too? When I had the place to store stuff. I would go to a place like you were make an offer on all the parts, and vehicles. I would offer for lower (my end) price to haul off debris to the dump.
Nice one brother
hey jonathan, my dads 50 chevy styleline has the same wheels. they are called "drag mags". made in the late 50s or early 60s i believe. they dont have a very safe looking bead on them, so radials might not work without a tube. his 50 chevy is also about that rusty haha.
Maybe it is a rare Sedan Delivery with the optional polyester plastic rear fenders!
That is a pretty tired car. Still cool though.
The contents of the inside building should be interesting, along with seeing the good car better.
Thanks.
I want the parts car !
Save it !!!!
I like the military kwanzaa hut :) thanks for sharing
Those old mags do not have a safety bead locks on them,but they are cool
It'd make a cool shop truck with a built 270 and 5 speed.
Those overloaders are not stock, and it looks like it has a 55-57 rear swapped in if its open drivetrain. Those buckets look like the originals. Those only came with one bucket standard, and the 2nd one was an option.
I am in the rustbelt and even with all that bondo, I would build that in a second. EMS makes half quarters, rockers, and more for that car.
That would be cool as a grave digger monster truck replica one day build
The stickers kinda make you wonder if that was a delivery vehicle for an auto parts store.
The parts car could be a one day hot rod build!
bondo helper springs!! lmfao!!!!!!!! cool old car, cant wait till you go get the other!!!!!!!!!!!!!!!!
Anther good video as normal Jonathan from Andy in UK
Spring Cleaning Baby
Wipe over with a damp tissue, sorted.
I don't know what you paid for the car, but if the grill is straight, not pitted could be polished out or re-chromed, it's worth what you paid for the car most likely. I've owned 4 53 and 54 Chevy Belair's. A repop cost, at the time, 1,499 bucks. I hear that now they are around 2,000 bucks. A good used original cost me 850 bucks. And I got lucky when I found it. And that was 9 years ago. I've seen just the centerpiece go for 300 bucks. If the grill is straight, you scored.
cool van.
looks like chevy stock mounting brackets for the seat.
cool music
The hood is pre cut for a scoop ha ha
Fix the good one and turn the parts car into another camper to be pulled by the good one. Just clean up the bondo a bit and leave it as is.
All you need for a 60s hot rod is a 348 or 409.
Almost looks like a paint booth
looks roomy ! if it wasent for the originalety of it , a stelth camper would be awesome to build out of it
Dang you had to work for that one
Do you have any info on the black Chevy truck? Looks like a 454SS. I’d like to just see a short clip on that.
Just the 454ss stickers. 5.7 truck.
Just imagine if it were lead instead of bondo!
I would run it just how it is. Let me know how much you want for after you go through it.
well another one saved from the crusher for now at least.
Back I the mid 70's my Mom slid her car in a ditch during a snow storm. 2 guys stopped and pushed he out, told her, the car has no weight in the rear end, so they threw 2- 50# bags of rock salt in her 1968chevell Malibu. Of course the trunk seal leaked. 2 years later the muffler fell off, she drove to her mechanic, he opened the trunk, there was nothing left, frame rusted threw, never got a new muffler, just a bill to tow her car to a junk yard. Times have changed, I don't think you loose money on a SS396 Bucket seat console Chevelle , anymore
Bought a 1950 chevy 5 window truck, Someone had put a bag off fertilizer on passenger side front of the bed. The truck was perfects except that about 12 inches of frame was missing where the bag was.
I've seen my share of art projects.
Is the Silverado for sale?
Maybe it hauled liquor at one time.
the 1950 heavy half ton did have 6 lug wheels
I looked it up and all pre 1949 cars were 6 lug trucks were till 70 or 71
That is rough
Is it for sale?
I am interested in the parts car if you have it up for sale. Not sure how to reach you other than on here!
🤘💪🙂👍
Probably had a bag of fertilizer or lime laying on the hood that caused the rust
arent those also called pie wagons
Pie wagon was the pizza del. Truck from the movie Hollywood knights. It was so popular that most people use the term for the old sedan deliverys. The 1 in the movie was sweet.
@@ronnielester2933 i knew i heard it somewhere thanks, it would make a really ssweet ride though.
If like the parts cars for a project with my grandkids
Dude throw all that crap out
Wish I could help.
looks like they had a 454 ss in there..
i need that grill lol deliver to canada?
the seats do not look right for 52 I remember them as flatish with no side bolsters at all.
RAT ROD BUILD PARTS CAR CANIDATE !!!!!!