I really love this. Seems like you have a lot of cool tools that make this a little easier. I’m interested in how to create names easily for the badges.
This video was excellently done. I’ve learned so much just from this one video and I have watched a lot of videos and still didn’t learn new tricks and techniques as I did with this one. Thank you very much. New sub here!
Very informative video. I have learned to use glycerin and distilled water when making snow globe tumblers, 50/50 mixture.Prevents bacteria from growing in the liquid.
How much resin do u mix for the 2 round shakers? 20ml is to much and how much for doming. Where did u get bottle that fills the shaker ? Great tutorial thank u so much.
Depending on the brand of your resin it could be anywhere between 15-20 mL. Here is the link to the squeeze bottles. Please feel free to reach out for additional help! Thank you. amzn.to/3WpuATX
Yes! I purposely did not list one because everyone has some kind of sensitivity to latex & I preferred to keep it open. Feel free to find one that’s safe for you. 😎
To be honest I just place the acetate sheet on top of the shaker and trace with a permanent marker. Then I cut it and after I clean the film with alcohol before applying it to the shaker.
Great video, moves quickly. I don't understand though why you drilled a hole in the top and then later filled it? I thought you were going to screw into top a hook for a ring but you didn't. Thanks for the reply.
Hello! Is the video too fast? Still learning to find a good pace. I drill a whole to fill with liquid to make the bits float inside. These are badge reels not keychains which is why I didn’t attach a keyring.
Thank you!! Love this!! Seems very easy!
I really love this. Seems like you have a lot of cool tools that make this a little easier. I’m interested in how to create names easily for the badges.
For the names I use my cricut to cut the vinyl decals.
Really found your latex trick handy and informative for me being a resin newbie! Thank you for your content!
Glad it was helpful!
This video was excellently done. I’ve learned so much just from this one video and I have watched a lot of videos and still didn’t learn new tricks and techniques as I did with this one. Thank you very much. New sub here!
Thank you!
Nice job
Thanks!
Your work style is so neat and tidy. This was so informative! Thank you!
Thank you!
Very informative video. I have learned to use glycerin and distilled water when making snow globe tumblers, 50/50 mixture.Prevents bacteria from growing in the liquid.
Thank you for the tip.
This is so cool! Thanks for sharing
Thanks for watching!
Great job, nice video. 🙂
Thank you! 😃
BEAUTIFUL
Thank you for your support!
Love the liquid latex step…. Do you ever use locking Velcro instead of glueing to reel? I learned that from other videos. Allows for interchanging
Actually I use magnets when people ask. Since I started adding beads to them interchangeables don’t always match the beads 🫣
Where did you come up with the badge card?
Hi! I actually made a video on how I diy it. Thank you.
DIY Backing Card
ruclips.net/video/3C0A1w7E5eQ/видео.html
Can you tell me what I am going use the printer for?
Are you referring to the HP printer listed in the details?
Where did you find the cards to hang the finished badge reel?
Hello! I made them! I also made a video on how I made them! Please check it out. Thank you for your support!
Whats the link for the silicone that you covered for over pour to protect from epoxy? Please and thank you.
It’s actually liquid latex 😊
How much resin do u mix for the 2 round shakers? 20ml is to much and how much for doming. Where did u get bottle that fills the shaker ? Great tutorial thank u so much.
Depending on the brand of your resin it could be anywhere between 15-20 mL. Here is the link to the squeeze bottles. Please feel free to reach out for additional help! Thank you. amzn.to/3WpuATX
I am just learning. ❤your technique. Can you send me links to your products. Thank you so much.
The links are listed in the description box in the video. Thank you.
Hi thanks for the video, how is the E6000 glue looks like you use just a bit. I glued mines with hot glue gun and they come apart
The E6000 holds up great once you allow it to fully cure.
@@cutepupcrafts Thank you. :)
Love this DIY, what kind of film you use on the project? Where did you get it from?
It’s from Amazon amzn.to/41A2vx1
where can I get the pink and glitter from? I notice it's like tiny glitter. And where can I get the SVG files from?
Most of the glitter I used in this video came from Walmart. SVG… if you’re referring to the font it’s Arab Bold on design space.
Hi can you please leave the link for the transfer clear film in Amazon thanks
Thank you. Here’s the link: amzn.to/3ZUlCRt
@@cutepupcrafts thanks baby 💓😊
Love your tutorial! Do you have a link for that syringe
Here’s the link! I use the 10 mL
amzn.to/3YI5B0r
@@cutepupcrafts thanks!
What size is the circle
The entire shaker itself is 2” and the shaker film measures at 1.8”
Does it matter what kind of liquid latex you use? Like make up, theatrical, or any kind?
Any kind would work
Awesome thank you!
How cute.. what a great detailed video.. thank you for making it 🥰
Aww Thank you.
So cute! Can you include a link to the shaker bits? TY
Same website I that I get my molds from 😎
Hello where can I find the shirt shaker mold
Hello! Yes the link should be link in the description box.
Loooooovvvvveeeeeee.
I didn’t see the liquid latex listed
Yes! I purposely did not list one because everyone has some kind of sensitivity to latex & I preferred to keep it open. Feel free to find one that’s safe for you. 😎
Could you use uv resin for doming the piece? Or would it not come out near as clean?
Yes you can! But for the life of me I cannot get them to cure without bubbles. :(
How big is the circle you use for the circle piece
To be honest I just place the acetate sheet on top of the shaker and trace with a permanent marker. Then I cut it and after I clean the film with alcohol before applying it to the shaker.
Great job, I will give it a shot. What is the name of that tool you were using with the pink tip? Thanks for sharing. I'm new to resin.
Aww thank you! Yes give it a try! I’m here to answer any questions you have. Did you mean the tool with a teal tip? It’s a silicone brush.
The molds are sold out on that website and I cannot seem to find them on Amazon. Any suggestions?
No worries she restocks almost every Monday night!
These r gorgeous 😍
Thank you!!!
WHAT IS THE FILM YOU USED FOR THE TOP, I CAN NOT FIND IT ON AMAZON. :( IS IT THE PLEXIGLASS? THANK YOU.
Acetate it’s linked in the description box
@@cutepupcrafts is it the 4mil 10mil or 6mil?
Can u include a link for the liquid latex??
Here you go!
amzn.to/3NWZY8B
Great video, moves quickly. I don't understand though why you drilled a hole in the top and then later filled it? I thought you were going to screw into top a hook for a ring but you didn't. Thanks for the reply.
Hello! Is the video too fast? Still learning to find a good pace. I drill a whole to fill with liquid to make the bits float inside. These are badge reels not keychains which is why I didn’t attach a keyring.
Is there a need for gloves or respirator with the resin you use?
You should always wear gloves & use a respirator because no one knows what they’re allergic to until they’re exposed.
Love this tutorial! I realize this vid is a year old, but hopefully you will respond🤗. Do you have a link for the Liquid Latex?❤
Thank you!!!!
amzn.to/3PI4V91
@@cutepupcrafts you are so awesome!!!♥️♥️♥️