With the super clean quality muffler mod , mild port an at least 1 of the sharpest chain around , may be smoothest best performing 888 ive seen so far 🏁
Hey Papa you have an awesome channel very interesting and progressive always doing something new and different including the Farmer Tech stuff keeps the big guys honest 😁 TtylCliff
Rami ...te înțeleg perfect anumite vicii necesită timp ,pasiune ,cheltuieli de întreținere a viciului...dar m-am cam molipsit și eu de la tine...pe lângă aparate de sudură ... mai am și câteva drujbe pe care nu cred că voi fi capabil să le aduc în stadiul segmentare ( mai ales că la noi lemnul face parte din materiale prețioase 😀).
I ported my g888 from the front plate to the side so the fumes weren't being reflected off the the wood back at my face😉, but brother ya made yourself a hot saw!
Fain clip. Oricum, a ieșit un monstru din 888 fără dar și poate. Bine in condițiile date se bate cu 880/1 si 3120 fără nici o reținere. Ps: atat ai cărat pe ele, de te ai făcut cât hulk 😁 Te salut Ramiro 😈
why do you have so much squish? i think you can gain a lot of torque with dropping it to 0.7. Or is it almost impossible to start with that compression?
@@poparamiro Actually with a flat base that Stihl uses you can do it without a lathe or mill, it's a long process but you could go to .6mm and pick up a lot of compression. Don't get me wrong you have it running nice but it would also play with your port timing if you tried to change it now as I'm sure you are aware.
it's too much brother, how much is it. Sell me this baby. I like it so much. Thank you for making a video about this machine, I wish your family good health.
Dude, are you serious? You're on RUclips asking this question when there are at least a few hundred vids on Holzfarma saws and a shit ton of good reviews on here.
O Machado e a Motoserra Eli Silva e Zé Goiano Composição: Eli Silva / Zé Goiano O machado e a motosserra, tiveram uma discussão Motosserra diz que é orgulho da evolução Machado pra mim já era, pois vem do tempo de Adão Você agora só serve pra fazer calo na mão Motosserra dá um ronco relou o dente no tronco, já se vê o pau no chão A serra chamou o machado, pra fazer uma porfia Machado aceitou na hora, e quando chegou o dia Entraram junto no mato pra mostrar a serventia A motosserra roncava, machado velho tinia E naquele matagal, foi só cavaco de pau, pó de serra que subia E esse grande duelo, deste jeito é que termina Na briga das ferramentas, o machado é que domina Motosserra parou cedo, ali no tronco da quina Machado seguiu cortando, mata grossa e mata fina Motosserra impotente, rebentou sua corrente, acabou a gasolina Que isto sirva de exemplo para toda humanidade E você que é tão jovem, tem que saber a verdade Respeite bem os mais velhos, não brinque com sua idade Uma pessoa idosa, também tem utilidade É um diamante valioso, se não tivesse o idoso, não teria mocidade
Not a fair test as each time a different chain was used for the test to be true and fair you need to show it working with the exact same bar and chain used in the first stock one and cut minimum 2 cookies to get an average
Bahahaha that looks like a lot of fun but shoot I can see a lot of misnomers right there. You pumped your exhaust Port Outdoors at rate so that way when you're cutting it freaking blows back in your face nobody likes sucking exhaust fumes on the other side of it you freaking decrease the size of your bar for your next cut well Isn't that cool good try brother good try
Наука
I did not know they were making that saw now ....I gotta get my hands on one . You really stepped that thing up it's running
Thanks John!
Yes, they do, a lot of fun with "big blue"...
Can't wait to see it on your hands 😁
👍🏿👍🏿👍🏿👍🏿
Price went up as of 4/24/22 was $400 last month with a bar and chain on amazon. Now its $800 without the bar and chain.
. Garbage. Poorly engineered and constructed. Total waste of money.
@@IsAmericaforSaletoChinaThat's China for you.
Awesome my friend, you did an awesome job on the mods!
Super! Faina lucrarea la cilindru si rezultatul. mild ported e cel mai ok,ca nu mereu mai larg inseamna mai bine. Salutare si toate cele bune!
Salutare!
Da, e nevoie de cateva modificari sa fie in regula...
Spor si numai bine!
Interesant acest clip.. Se aude mult mai bine dupa portare, merge super.. LIKE
Da, stoc se comporta foarte slab...
Numai bine!
🤝🤝🤝
Nicely done sir...she rips now ...nice mm and port job🤙🏻🪓😎
Thanks!
Best regards!
🤝🤝🤝
Cunosc unealtă, ai lucrat o bine de tot la cum merge💪💪💪. Sănătate și spor la treabă 🤝🤝🤝
😁👍💪
Salutare si toate cele bune!
🤝🤝🤝
With the super clean quality muffler mod , mild port an at least 1 of the sharpest chain around , may be smoothest best performing 888 ive seen so far 🏁
Thanks!
🤝🤝🤝
@@poparamiro Thank you popa , your channel top notch !
@@poparamiro p
Great job on that saw! 🤩🤩
Thanks for watching and comment!
Hey Papa you have an awesome channel very interesting and progressive always doing something new and different including the Farmer Tech stuff keeps the big guys honest 😁 TtylCliff
Thanks and all the best!
🤝🤝🤝
Rami ...te înțeleg perfect anumite vicii necesită timp ,pasiune ,cheltuieli de întreținere a viciului...dar m-am cam molipsit și eu de la tine...pe lângă aparate de sudură ... mai am și câteva drujbe pe care nu cred că voi fi capabil să le aduc în stadiul segmentare ( mai ales că la noi lemnul face parte din materiale prețioase 😀).
Situatia e grava atunci 😁
Numai bine si spor!
😂😂 😂😂
I ported my g888 from the front plate to the side so the fumes weren't being reflected off the the wood back at my face😉, but brother ya made yourself a hot saw!
Nice work!
Thanks and best regards!🤝🤝🤝
Good job my friend!
Nu are nici o greata cu 120cm 👏👏👏
Thanks friend!
🤝🤝🤝
Performanta FarmerTec și raportul calitate preț sunt corecte , rămâne să fie puțin ajustate doar de meseriașul Ramiro)))) și totul e 👌💪💪💪
Multumesc!
Numai bine si spor!
🤝🤝🤝
Nice work
Thanks!
🤝🤝🤝
Nice work.
Thanks for watching and best regards!
Super fain. . . ! Ești un mare meseriaș. . . ! Te salut prietene Ram. . ! 🙋👍👍👍👍👍💪💪💪💪💪
Salutare!
Multumesc si toate cele bune!
🤝🤝🤝
Very cool!
Thanks for watching!
🤝🤝🤝
Urlă și trage mastodontul fain de tot 👍 Te salut Ram 🤝
Salutare si numai bine!
🤝🤝🤝
u sure the chain wasn't sharpened better on the ported part?
Mình làm thuê đến bây giờ mới đủ tiền mua cái máy cắt này. Tuyệt vời quá đi
jeeeesus thats a big ol saw there! think i'll go ahead and get that G666 for now. lol
G660 is great!
All the best! 🤝🤝🤝
Fain clip. Oricum, a ieșit un monstru din 888 fără dar și poate. Bine in condițiile date se bate cu 880/1 si 3120 fără nici o reținere.
Ps: atat ai cărat pe ele, de te ai făcut cât hulk 😁
Te salut Ramiro 😈
Salutare!
Da, acum e la nivelul celor trei, ca viteza....
M au terminat 💊💊💊🤣
Spor si numai bine! 🤝🤝🤝
She came alive!!!
Thanks for watching and best regards!
how do you weld this muffler so good without burnig any hole?
It was brazed..
Thanks for watching and best regards!
I want to get my 395XP tweaked a little. Do some work on the big saws and they are killing machines!
Yes, 395 is awesome!
Thanks for watching and all the best!
👏👏👏👍
🤝🤝🤝
Deja i-ai facut overlock :))))) Merge de bubuie !
😁 E facut de mult, doar acum l am pus....
💩🤝🤝🤝
why do you have so much squish? i think you can gain a lot of torque with dropping it to 0.7. Or is it almost impossible to start with that compression?
True, stock it was 1.2mm.
Unfortunately, here i have none to machine the cylinder base...
Thanks for watching and all the best!
@@poparamiro i understand it. maybe some potential for the future.
@@poparamiro Actually with a flat base that Stihl uses you can do it without a lathe or mill, it's a long process but you could go to .6mm and pick up a lot of compression. Don't get me wrong you have it running nice but it would also play with your port timing if you tried to change it now as I'm sure you are aware.
So how come you didn't cut with the same .404 setup after you ported? Show is a true scale as to what it did
I have ported cuts with 120cm bar and 404, i will post it ...
Thanks for watching and best regards!
👍👍👍👍
🤝🤝🤝
what size bar have you out on this thing will it take 20 or 24 inch bar
Yes, 24 is ok, best regards!
I think he has a 42" bar on it
Have you done a video with all modifications, and .404 chain?
Yes, i have done...
Best regards!
How has reliability been ? I'm stabbing some huge pecans. Need 5 ft. Bar too big for my 661
Did not cuth much...
Best regards!
best
Thanks for watching and best regards!
@@poparamiro Thannks for video bro
Wow! That thing eats wood!
After mods, for sure...
Thanks for watching and all the best!
@@poparamiro indeed. You did a great job! I’m thinking of doing a mild port on my g372xp. Do you have any tips?
it's too much brother, how much is it. Sell me this baby. I like it so much. Thank you for making a video about this machine, I wish your family good health.
Thanks and best regards!
Unfortunately is not for sale...
All the best! 🤝🤝🤝
👍👍👍🙏🙏
Best regards!
👍👍👍🤝🤝
🤝🤝🤝
is a holzfforma worth its money or is it just a cheap rippoff? im considering one
Yes, with few interventions is a great saw for the money...
Thanks for watching and best regards!
Dude, are you serious? You're on RUclips asking this question when there are at least a few hundred vids on Holzfarma saws and a shit ton of good reviews on here.
Salut. Cum ai conectat tahometrul sa citeasca turatiile?
Poate citi si fara conectare daca e tinut aproape...
Numai bine!
Any chance you could make a video of how you do you muffler mods
They already are on my channel:
ruclips.net/video/hUHO_k9EBj0/видео.html
Thanks for watching and all the best!
What I mean is a step by step on doing a muffler mod
@@J.R.723 maybe in the future
🤝🤝🤝
O Machado e a Motoserra
Eli Silva e Zé Goiano
Composição: Eli Silva / Zé Goiano
O machado e a motosserra, tiveram uma discussão
Motosserra diz que é orgulho da evolução
Machado pra mim já era, pois vem do tempo de Adão
Você agora só serve pra fazer calo na mão
Motosserra dá um ronco relou o dente no tronco, já se vê o pau no chão
A serra chamou o machado, pra fazer uma porfia
Machado aceitou na hora, e quando chegou o dia
Entraram junto no mato pra mostrar a serventia
A motosserra roncava, machado velho tinia
E naquele matagal, foi só cavaco de pau, pó de serra que subia
E esse grande duelo, deste jeito é que termina
Na briga das ferramentas, o machado é que domina
Motosserra parou cedo, ali no tronco da quina
Machado seguiu cortando, mata grossa e mata fina
Motosserra impotente, rebentou sua corrente, acabou a gasolina
Que isto sirva de exemplo para toda humanidade
E você que é tão jovem, tem que saber a verdade
Respeite bem os mais velhos, não brinque com sua idade
Uma pessoa idosa, também tem utilidade
É um diamante valioso, se não tivesse o idoso, não teria mocidade
Thanks for watching and all the best!
Is it a good quality saw?? Because im thinking to buy a g888!
For the money it is great!
Thanks for watching and all the best!
🤝🤝🤝
wait a minute. did you put a 375 or 3/8 chain
3/8 at the end...
Thanks for watching and best regards!
@@poparamiro
you make the best video. you need to record with G888 Ms880 and 881 large videos. I can't wait for that
Really woke her up
Yeah... thanks for watching and best regards!
Funcționează foarte bine la ce preț ajunge balaurul albastru? Spor la treabă
Multumesc la fel!
Pretul e in jur de 500usd, dar mai e si transport...
Numai bine!
Rami ....salutări...sănătate și numai bine...o întrebare???
Nu ,o scoți la licitație?😄
Sper, să nu te superi!!!!
Salutare!
Din pacare nu....
Numai bine!
No Coment!
Bv Maiestre.
Numai bine!
Needs a fmf fatty torque pipe for a 125cc mx bike.
Thanks for watching!
Why not use a Holzfforma bar?
I will for sure...
Best regards!
🤝👍👍👍🇺🇿
Thanks for watching!
🤝🤝🤝
This saw is a clone of which saw?
Stihl 880.
All the best!
Ya bu motorlar hangi sitede satiliyor bir türlü bu modelller yok sadecr avrupa pazarında var mesala türkiyede sadece 381 modeline kadar var
FarmerTec website
Best regards!
Cum e consumul fata de Sthil ??
Relata bine consuma la fel...
@@poparamiro de unde pot sa iau un g888 in România
Cuba tes dengan 3120xp
Thanks for watching!
Cuántos dientes tiene
Cadena
👍👍👍⭐️⭐️⭐️⭐️⭐️⭐️⭐️❤️👍👍👀
🤝🤝🤝🤝🤝
А эта пила нормально пилит большие деревья? 🌲🌲
For sure!
Thanks for watching!
@@poparamiro А вы можите на русском языке писать?
👸🍑👏
🤝🤝🤝
SALUT TOT MAI PUTERNICE DAR ȘI GRE?..
😁Adevarat...
Numai bine!
Me bein
Thanks for watching!
Esa cadena va muy olgada
Thanks for watching and all the best!
ราคาเท่าไหร่ครับ
Thanks for watching and all the best!
Sell me this genuine holzfforma G888 saw, bro.
Sorry, not for sale...
🤝🤝
@@poparamiro I thought you sold it, I was going to order it. Thank you
Not a fair test as each time a different chain was used for the test to be true and fair you need to show it working with the exact same bar and chain used in the first stock one and cut minimum 2 cookies to get an average
Thanks for watching and comment!
If you know anything about the saw you would see the difference even though it had different chains
Bahahaha that looks like a lot of fun but shoot I can see a lot of misnomers right there. You pumped your exhaust Port Outdoors at rate so that way when you're cutting it freaking blows back in your face nobody likes sucking exhaust fumes on the other side of it you freaking decrease the size of your bar for your next cut well Isn't that cool good try brother good try
Thanks for watching and comment!
Best regards!
You're a fool
Oh my it’s slow
All the best!
Chain is to loose
Thanks for watching and best regards!
🤝🤝🤝
No it's not fool
Awesome my friend, you did an awesome job on the mods!
Thanks for watching and all the best!
🤝🤝🤝