Hi, when I buy the p1 pro fingerprint would I get tools like the multi tool to set it up or do I have to use my own? Also does the p1 pro fingerprint come with the alarm system as well?
@Solar Scooters I have the P1 Pro, USA edition, 11 inch tires. Somehow my system got reset itself, can you let me know what P 1 through P3 are supposed to be at?
@@SolarScootersuk Just for reference here’s what they said for the USA version: Please refer to the below P-settings P0- wheel diameter setting (don’t change) 120 P1 - voltage setting (don’t change) 60 P2 - wheel magnets setting 15 (don’t change) P3 - mph or km/h 0 or 1 P4 - kick start 0 or 1 P5 - cruise control 0 or 1 P6 - slow start or hard start ranges from 1-5 , 5 is highest P7 - speed limit ratio 0-100 P8 - E brake 0-5 P9 - To register a new fingerprint P10 - To reset the fingerprint After you change the P-SETTINGS, please ensure 1.After riding, turn off the display by pressing down the power button 2. When you turn on the display and the fingerprint icon comes up, you will need to make sure to hover your fingerprint on the scanner straightaway. If you leave it, it will reset the p-setting as a anti-theft protection mechanism.
@@SolarScootersuk the team is ignorant as fuck and I wish I never wasted $2,000 on a scooter from y’all it’s funny befor I bought the scooter everyone was so nice then once the scooter and it had problems and I asked for y’all to fixed them I was rude and y’all didn’t go out y’all way to fix the scooter , y’all some losers foreal
Hi, when I buy the p1 pro fingerprint would I get tools like the multi tool to set it up or do I have to use my own? Also does the p1 pro fingerprint come with the alarm system as well?
All escooters come with full tool set to assemble 🙏 correct it comes with an alarm system
@Solar Scooters I have the P1 Pro, USA edition, 11 inch tires. Somehow my system got reset itself, can you let me know what P 1 through P3 are supposed to be at?
I’m not personally sure for the P1 Pro USA edition - although if you email the team they can let you know what it should be:
hello@solarscooters.co.uk
@@SolarScootersuk Just for reference here’s what they said for the USA version:
Please refer to the below P-settings
P0- wheel diameter setting (don’t change) 120
P1 - voltage setting (don’t change) 60
P2 - wheel magnets setting 15 (don’t change)
P3 - mph or km/h 0 or 1
P4 - kick start 0 or 1
P5 - cruise control 0 or 1
P6 - slow start or hard start ranges from 1-5 , 5 is highest
P7 - speed limit ratio 0-100
P8 - E brake 0-5
P9 - To register a new fingerprint
P10 - To reset the fingerprint
After you change the P-SETTINGS, please ensure
1.After riding, turn off the display by pressing down the power button
2. When you turn on the display and the fingerprint icon comes up, you will need to make sure to hover your fingerprint on the scanner straightaway. If you leave it, it will reset the p-setting as a anti-theft protection mechanism.
Need the uk settings plz ASAP
Is it 95..60..15settimgs one two three thanks
@@valleybonneyaj2158 Email the team:
hello@solarscooters.co.uk
And also what does the kickstart do
@@jayneilson4982 that determines if the scooter will just go with the accelerator, or if you need to give the scooter a little push to get it going
What are all the parameters for the ff lite including the ones not to change? Thanks :)
We have made a video just like this one on the FF Lite here on our channel 🙏
@@SolarScootersuk what about the ff lite finger print? Thanks!!
@@britishfireworks same as P1 Pro
Should p1 pro fingerprint P0 be on 95 or 120 ?
Email the team they can let you know. This parameter shouldn’t be changed by the user.
hello@solarscooters.co.uk
@@SolarScootersuk the team is ignorant as fuck and I wish I never wasted $2,000 on a scooter from y’all it’s funny befor I bought the scooter everyone was so nice then once the scooter and it had problems and I asked for y’all to fixed them I was rude and y’all didn’t go out y’all way to fix the scooter , y’all some losers foreal
My solar p1 pro
Is only doing 38mph
@@jayneilson4982 have you made sure your parameters are correct and you are in the highest speed mode, dual motor on, eco mode off etc ?
Yea what are the fast speed settings as the video is abit
Fast
@@jayneilson4982 Just pause the video at the specs part and you can see what the highest numbers are for the launch mode
Does the speed limit ratio need to be 100
@@jayneilson4982 that should be left alone