Thank you for the great lesson. I must be doing something not right cause when I get to set hole sewing, then I get "Invalid pair was selected" 🙃 I am such a newbie at this!
@@OurShihTzus for set hole sewing the inside must be completely surrounded by the outside and you can’t have an outline. Other than that I don’t know. Also check to make sure non of the lines are crossed.
@@OurShihTzus are you in Layout and editing or design center? Sorry I wish I could help. The only place I know of that has moving red lines is design center and that has different tools. Make sure your inside shape is closed.
@@enchantingrosemary8776 Thank you again for helping me with this. I finally got it but it took many different tries. :) I think I was not getting the inside closed off at the exact place of starting, which is difficult to get sometimes.😊
Hello Rosemary, I have a problem with my stitches anchoring in one spot then move a distance and start sewing. So say on lettering, after stitching one letter the thread will be cut then needle will move to a random position; anchor the thread then move back to where the next letter is to begin.
@@GaryGladu so at first I thought it might be your machine but after thinking about it that is not the problem. I have honestly never seen that happen. I wish I could help but I don’t know.
@@kandacejocarpenter not sure what you mean by pea design but you can change designs made elsewhere in PE design software. The easiest way is to convert to outline and ungroup. Then you can change the fill, density, color and shape.
Hi Rosemary, Thanks for this helpful tutorial about PE design 11. Very clearly explained. Have a nice day
@@carolineprijs-wijnen4487 you are very welcome.
Great stuff, thank you Rosemary, very helpful.
@@Jackie-zq2xs thanks for watching. Hope it was helpful.
Thank you for the great lesson. I must be doing something not right cause when I get to set hole sewing, then I get "Invalid pair was selected" 🙃 I am such a newbie at this!
@@OurShihTzus for set hole sewing the inside must be completely surrounded by the outside and you can’t have an outline. Other than that I don’t know. Also check to make sure non of the lines are crossed.
@@enchantingrosemary8776 I get moving red lines around both parts which I am sure is not right.
@@OurShihTzus are you in Layout and editing or design center? Sorry I wish I could help. The only place I know of that has moving red lines is design center and that has different tools. Make sure your inside shape is closed.
@@enchantingrosemary8776 Thank you again for helping me with this. I finally got it but it took many different tries. :) I think I was not getting the inside closed off at the exact place of starting, which is difficult to get sometimes.😊
Hello Rosemary, I have a problem with my stitches anchoring in one spot then move a distance and start sewing. So say on lettering, after stitching one letter the thread will be cut then needle will move to a random position; anchor the thread then move back to where the next letter is to begin.
@@GaryGladu what machine do you have?
@@GaryGladu so at first I thought it might be your machine but after thinking about it that is not the problem. I have honestly never seen that happen. I wish I could help but I don’t know.
I have a question, can you take a pea design purchased from another company and change
The design in PE 11.
@@kandacejocarpenter not sure what you mean by pea design but you can change designs made elsewhere in PE design software. The easiest way is to convert to outline and ungroup. Then you can change the fill, density, color and shape.