So.. YOU can't even tell he's attaching to concrete, NOT drywall. Lets have YOU make your own video showing us how to tie-in drywall to concrete.. the 'CORRECT' way. Hahaha @@MAGAMAN
Just my experience, but do not use metal corner bead unless you are screwing it into the wood behind the drywall. Metal expands and contracts. This will crack over time if not screwed in. If you want to mud it in, use paper, plastic or paper faced metal bead.
Меня только смутило что гипсокартон вверху на кромку положили, я бы положил в этом случае плашмя пару рядов и снизу шурупчики и потом замазал😊. Но тут видно у всех своё видение.
@@CP-mb7ly I use drywall nails for corner bead. I find it easier to get everythign aligned with nails, but would never use them for installing drywall.
@@CP-mb7lynot the point. The drywall he threw in the hole wants to push back since there's nothing behind it. There should be something behind it to secure it. Off the top of my head, you could screw a 2x4 in from the ceiling drywall under it that's 1/2" recessed. Then when you press drywall against it, it won't go back further. Though I'm sure pros can come up with better solutions.
If I caught anyone doing drywall in my house like that, I would throw you out instantly and have everything you did redone. You do not install drywall that is only held in by drywall mud. You definitely do not install metal corner bead that is only held in by drywall mud. Both require being attached to structure with screws or nails. That gets bumped by anything and you are going to have a big mess.
No backer board to hold the drywall pieces, not taking down the remaining top drywall and using multiple drywall pieces.. hope you are just a DIYer and not a professional contractor.
omg. WHAT THE HELL did you do to someones home. What happens when someone is moving something a few years down the road. bumps the ceiling and that corner bead that is attached to nothing.. and i mean NOTHING. comes down and slices the little kids frigging ear off. bead is as sharp as a razor blade at points. I have had many deep cuts from haning bead.. I would sue you if this was my home. and god forbid this hack job hurt one of mine. you would have none left of yours.
That was rude and you're totally wrong! This is in California so an earthquake will most likely happen first. The small child will seek shelter in the door way and will get his or her eye impaled.
That is terrible drywalling. Please do not teach this to the new and up-and-coming guys. It’ll only teach them how to do things wrong. If you’re going to post a video at least make it right. Terrible that you would even think that is OK.
@@olsen2840 Everything! Nothing is attached to structure with nails or screws meaning that its going to start cracking and need to be redone in no time at all. Also, if that metal corner bead falls of, it could seriously injure someone because the edges are very sharp.
Hey look how I can screw the customer over by hiding shit and taking the easy way out instead of doing it right because I wanna get home to the 30 ppl at home n cervesas
Once I heard the narrator thats all the explanation I needed 😂. I see this all the time on job sites. Sometimes cheap is too expensive.
Absolutely. This will all start falling apart in no time at all. 100% done wrong.
So.. YOU can't even tell he's attaching to concrete, NOT drywall. Lets have YOU make your own video showing us how to tie-in drywall to concrete.. the 'CORRECT' way. Hahaha @@MAGAMAN
Just my experience, but do not use metal corner bead unless you are screwing it into the wood behind the drywall. Metal expands and contracts. This will crack over time if not screwed in. If you want to mud it in, use paper, plastic or paper faced metal bead.
Отличный наглядный пример как делать НЕЛЬЗЯ
Меня только смутило что гипсокартон вверху на кромку положили, я бы положил в этом случае плашмя пару рядов и снизу шурупчики и потом замазал😊. Но тут видно у всех своё видение.
Е..ать какая халтура🤣🤣🤣
А потом кто нибудь будет крепить натяжной потолок и всё вырвет нахер... ☝️ 🙈
А вот и комменты от русских экспертов)
Потолок засрал, кромку не обработал.
I’m a DIYer and I would never do this. Cut out the torn wallboard and get some wood backing. Total hack job.
That's not 'wall Board' hot-shot.. he's attaching to the old 'concrete' wall.
Bagian dalam di isi foam bisa apa tidak ya?. Dari pada menggunakan rockwool?
You forgot to add some screws to the bead and fiberglass between the bead and sheet 🤦🏻♂️
So sollte man es immer machen!!👍👍👍🇩🇪
Ja, ganz genau. 🙄
Hola buenas, perdon la ignorancia pero para aprender estas cosas existe algun curso de construcción en seco seria, verdad?
This is a hack job. Knife skills are good. But no backing for that rock is sorry. Also like to use screws in metal corner beads.
Exactly what I was thinking. How would you have secured it?
Well maybe the Mexican guy doesn't need to use screws because he is better at this mindless activity than you are.
@@robertm5969ummm drywall screws....
@@CP-mb7ly I use drywall nails for corner bead. I find it easier to get everythign aligned with nails, but would never use them for installing drywall.
@@CP-mb7lynot the point. The drywall he threw in the hole wants to push back since there's nothing behind it. There should be something behind it to secure it.
Off the top of my head, you could screw a 2x4 in from the ceiling drywall under it that's 1/2" recessed. Then when you press drywall against it, it won't go back further. Though I'm sure pros can come up with better solutions.
👍👍👍
one curtain rod screwed into the air, coming right up...
Брат, сейчас подъедут мастера евроремонта из снг и напихают тебе полную панамку!😂
Не брат ты мне.. Дальнейшие слова ты знаешь.
That’s what it looks like when u get an amateur to do your work .
seam cracks incoming for someone else to deal with in a couple years. this isn't a cake frosting competition.
What did you just do
Lipa kwietnia
Great skill
Die Eckleiste setzt man zuerst mit
Where exactly did you see any kind of skills in this video..
Er hat das Loch geflickt, aber er ist kein Experte
Wo ist jetzt die Veredelung? Das ist ein völlig normaler Arbeitsschritt!
PSA: Go watch Vancouver Carpenter for drywall instead.
Este es el peor trabajo de drywall que e visto. espero que sea una broma, nisiquiere le puso algo para sostener el drywall
How to get repeating customers 😂
Eres bueno pero tanto como para dar clases creo que no...aún así me gusta lo que haces
If I caught anyone doing drywall in my house like that, I would throw you out instantly and have everything you did redone.
You do not install drywall that is only held in by drywall mud. You definitely do not install metal corner bead that is only held in by drywall mud. Both require being attached to structure with screws or nails. That gets bumped by anything and you are going to have a big mess.
Это называется сделать нанэт
No backer board to hold the drywall pieces, not taking down the remaining top drywall and using multiple drywall pieces.. hope you are just a DIYer and not a professional contractor.
I'm a DIYer, and I would have secured those pieces better 😅
Oh no you'd be surprised what cheap labor provides. I see it all the time.
I believe that’s concrete up top not sure tho
ale lipa
omg. WHAT THE HELL did you do to someones home. What happens when someone is moving something a few years down the road. bumps the ceiling and that corner bead that is attached to nothing.. and i mean NOTHING. comes down and slices the little kids frigging ear off. bead is as sharp as a razor blade at points. I have had many deep cuts from haning bead.. I would sue you if this was my home. and god forbid this hack job hurt one of mine. you would have none left of yours.
That was rude and you're totally wrong! This is in California so an earthquake will most likely happen first. The small child will seek shelter in the door way and will get his or her eye impaled.
@@benjaminsinger1897 California? Oh, that explains why he can't speak English.
Nice fake Klicks 😂
How Not to Drywall
How not to do it:
😱🤦
do not do it this way
Il mio cane lavora meglio
That is terrible drywalling. Please do not teach this to the new and up-and-coming guys. It’ll only teach them how to do things wrong. If you’re going to post a video at least make it right. Terrible that you would even think that is OK.
what's so extremely terrible?
@@olsen2840 Everything! Nothing is attached to structure with nails or screws meaning that its going to start cracking and need to be redone in no time at all. Also, if that metal corner bead falls of, it could seriously injure someone because the edges are very sharp.
Hey look how I can screw the customer over by hiding shit and taking the easy way out instead of doing it right because I wanna get home to the 30 ppl at home n cervesas
Плохо ! 👎 треснет.
No faith or passion in what you do
Bagian dalam di isi foam bisa apa tidak ya?. Dari pada menggunakan rockwool?