Shipping Container Boarding Out | Container Conversions

Before starting any boarding it is a good idea to mark your joist locations on the floor.
Firstly, I went all the way around the container and screwed the ground boards in place. Next, I installed the roof boards- it's a good idea to have someone help you with these! I then moved on to second, and last, wall boards. In the video I specifically speak about these boards because you have the vents to contend with. Heres how I did it: Cut the second boards so they finish just below the vent, this leaves you with a manageable off-cut to offer up. With this off-cut mark the vents vertical position. Measure from the second boards top to the vents bottom then from the second boards top to the vents top- transfer these measurements onto your off-cut and you will be left with a square that needs cutting out.
Useful Tip- 0:03
Board Thickness- 0:27
Where To Start?!- 0:53
Roof Challenge- 1:03
Vents- 1:37
Finishing Touches- 2:09
Board Thickness- 2:30
Material Options- 2:50
QUICK POINTS- 3:02
If you have any questions feel free to put them in the comments and I will endeavour to answer them.
Thanks for watching!