Apologies for the confusion. They’re only sold in one size now, which is the same dimensions as the large size. There is a drawing with dimensions in the listing photos if you want the specific measurements. It will work fine for your radio though!
Hello, here is a link to the 2007-2013 Silverado version: skymousa.etsy.com/listing/1585373463 Note that it only works for models with the bench seat/flip up console.
Do you have one which will fit securely to 2012 Silverado crewcab with the folding center console - it has the three cup holders with the little tabs inside the holders ..... ??? Thanx - Lew
The mounts have been updated to fit wider radios, yes. Here’s the listing: skymousa.etsy.com/listing/1369837002 There’s a photo on that page with bracket dimensions so you can verify it will work.
I want to install a cobra 29 in my 2018 Nissan titan xd. It has a center console but area in front has a cubby with movable cup holders. But it’s only a 2 cup holder. Any chance this will work for me? It would have to be offset. I can send pictures if that would help. Thanks for your help!
For anyone who sees this in the future and may have the same question, we had good luck with the adjustable mount for this application. It was installed towards the front of the console using the coin tray: skymousa.etsy.com/listing/1450403454
@@crankerson this one will not but there is a mount in the Etsy shop for 07-13 Silverados and that one should do the trick. Just make sure your console matches the ones in the photos for that listing 🙂
Here is a link to the 14-18 Silverado version: skymousa.etsy.com/listing/1369837002 Note that it only works for models with the bench seat/flip up console. If you have the full console we can explore other options.
@@caydenepperson8054 full console in a 14-18 truck? Can you send me a message on Etsy so we can discuss further? I have a mount that will likely work, it's just not available for sale yet but I can get one made up for you. skymousa.etsy.com
Hello, I don’t make anything specific to that vehicle, but here is a link to some mounts that are not vehicle specific that may work if you have a spot: skymousa.etsy.com?section_id=42597798
Not yet! I do have an adjustable one that could work depending on your interior configuration. That can be found here: skymousa.etsy.com/listing/1450403454 But the only Ford-specific mounts I have right now fit the 2015+ models.
So I ordered one of these and it came in last week when I installed it it wouldn’t stay secured to the cup holder any ideas on how I can fix it to where it won’t come out.
@@BigeE838 Interesting. You're referring to the rubber pieces that stick out inside the cup holder? It looks like you can get a cup holder assembly that has those for less than $30 if you want to go that route. GM Part # 23362989. Here's a GM store selling them, but there are numerous online stores selling them if you search for the part number: www.gmpartsdirect.com/oem-parts/gm-front-floor-console-front-compartment-23362989 Otherwise, a workaround might be to drill a hole for a set screw through the part of the mount that is inside the cup holder and then run a bolt through that to secure it. If you make the hole the right size, the bolt should cut threads into the plastic. Unfortunately since this uses a precise fit to hold it in place those little rubber knobs are important. If you would prefer, we do accept returns up to 30 days from day of purchase. Sorry for the hassle!
Correct. 2019 was the last year that used this style of console and only SOME 2019 models have it. Most 2019+ models have the updated console with 2 cup holders. We have a different mount in the Etsy shop for those trucks. It’s important to look at the photos shown in shop listings to make sure it matches what’s in the truck, as the interiors for the same model year are not always the same. This comes up with 07-13 Silverado interiors as well. Most have a 3-cup holder flip up seat it seems but some have a variation that is a 2-cup holder flip up seat.
I’ve put these on and taken them off dozens of times for prototyping, photos, etc without any cosmetic damage. I totally understand the concern though. I was also concerned about that when I first started making these but there wasn’t any evidence of scratching so I felt comfortable proceeding with the design. Haven’t heard any negative feedback from buyers about scratching either.
Got this for my 2018 1500 z71 Silverado! Works great with my Stryker 955 and very secure! Now If I could just figure out my noise issue coming from the truck I’d be set :)
Not at this time. I will note that model year for our development pipeline though. Is this what your center console/jump seat looks like? i.ytimg.com/vi/fzncvKAHwtQ/hqdefault.jpg
@@blitz9227 We have this one for 07-13 Silverados now. Should work if your console matches the one in the listing photos: skymousa.etsy.com/listing/1585373463
Just got mine a month ago. Absolutely the best mount I've ever used.
Glad to hear you’re liking it!
This is a great cb mount. I got it for my 4th gen ram. I did a quick video of it. Nice product and the shipping was quick.
Thanks for posting that video! Always helps others to see the installed product and especially from people using it!
I want this now, only when I go to Etsy it doesn't say if it's the small, or large one. I have a 29 LTD, chrome version, so I need the large mount....
Apologies for the confusion. They’re only sold in one size now, which is the same dimensions as the large size. There is a drawing with dimensions in the listing photos if you want the specific measurements. It will work fine for your radio though!
And if it works, what would be the part number, that i would need., can you send me the link, thank you so much....
Awesome, order placed!
I have a 2012 Chevrolet Silverado, and i have a cobra 29 Ltd classic, will it work
Hello, here is a link to the 2007-2013 Silverado version: skymousa.etsy.com/listing/1585373463
Note that it only works for models with the bench seat/flip up console.
Thank you, this is the big bracket I need for my cobra 29 Ltd classic, link you sent me correct
Do you have one which will fit securely to 2012 Silverado crewcab with the folding center console - it has the three cup holders with the little tabs inside the holders ..... ???
Thanx - Lew
It sounds like this one will work for you: skymousa.etsy.com/listing/1585373463
Thank you - I appreciate your response .....
Hey that's a great idea but I have the cobra 148 and I don't know do they make a bracket that's wider?
The mounts have been updated to fit wider radios, yes. Here’s the listing: skymousa.etsy.com/listing/1369837002
There’s a photo on that page with bracket dimensions so you can verify it will work.
I want to install a cobra 29 in my 2018 Nissan titan xd. It has a center console but area in front has a cubby with movable cup holders. But it’s only a 2 cup holder. Any chance this will work for me? It would have to be offset. I can send pictures if that would help. Thanks for your help!
For anyone who sees this in the future and may have the same question, we had good luck with the adjustable mount for this application. It was installed towards the front of the console using the coin tray: skymousa.etsy.com/listing/1450403454
Will this fit on a 2012 Silverado? I have 3 cupholders as well
@@crankerson this one will not but there is a mount in the Etsy shop for 07-13 Silverados and that one should do the trick. Just make sure your console matches the ones in the photos for that listing 🙂
@@crankerson here’s the link: skymousa.etsy.com/listing/1585373463
@@SKYMO-USA sweet! Thank you!
I have a 2017 chevy silverado LTZ
Here is a link to the 14-18 Silverado version: skymousa.etsy.com/listing/1369837002
Note that it only works for models with the bench seat/flip up console. If you have the full console we can explore other options.
@@SKYMO-USA i have the full consol. What would you suggest i try? Radio is a stryker 447
@@caydenepperson8054 full console in a 14-18 truck? Can you send me a message on Etsy so we can discuss further? I have a mount that will likely work, it's just not available for sale yet but I can get one made up for you.
skymousa.etsy.com
Do they make one for a Toyota Prius
Hello, I don’t make anything specific to that vehicle, but here is a link to some mounts that are not vehicle specific that may work if you have a spot: skymousa.etsy.com?section_id=42597798
Do you make one for a 2008 F150?
Not yet! I do have an adjustable one that could work depending on your interior configuration. That can be found here: skymousa.etsy.com/listing/1450403454
But the only Ford-specific mounts I have right now fit the 2015+ models.
So I ordered one of these and it came in last week when I installed it it wouldn’t stay secured to the cup holder any ideas on how I can fix it to where it won’t come out.
What year is your Silverado? And does it have the same three cup-holder style flip up console?
@@SKYMO-USA it’s a 2017 and has the same cup holders as in the video but mine doesn’t have the things sticking out to hold the drinks like in the vid
@@BigeE838 Interesting. You're referring to the rubber pieces that stick out inside the cup holder? It looks like you can get a cup holder assembly that has those for less than $30 if you want to go that route. GM Part # 23362989. Here's a GM store selling them, but there are numerous online stores selling them if you search for the part number: www.gmpartsdirect.com/oem-parts/gm-front-floor-console-front-compartment-23362989
Otherwise, a workaround might be to drill a hole for a set screw through the part of the mount that is inside the cup holder and then run a bolt through that to secure it. If you make the hole the right size, the bolt should cut threads into the plastic. Unfortunately since this uses a precise fit to hold it in place those little rubber knobs are important. If you would prefer, we do accept returns up to 30 days from day of purchase. Sorry for the hassle!
@@SKYMO-USA I may try the set screw. I love how the mount works and the placement for it.
@@BigeE838 Ok please let me know if I can help in any way. It is a pretty cool mount, hope you can get it to work with your cup holders!
This unit does not fit a 2020 Silverado as stated in video. The cup holder edge is too narrow.
Correct. 2019 was the last year that used this style of console and only SOME 2019 models have it. Most 2019+ models have the updated console with 2 cup holders. We have a different mount in the Etsy shop for those trucks. It’s important to look at the photos shown in shop listings to make sure it matches what’s in the truck, as the interiors for the same model year are not always the same. This comes up with 07-13 Silverado interiors as well. Most have a 3-cup holder flip up seat it seems but some have a variation that is a 2-cup holder flip up seat.
You installed the CB mount up upside down. The radio can fall out.
Thanks for the tip!
Right after it scratches the shit out of my plastic, sorry I’ll pass thanks man. Good video though.
I’ve put these on and taken them off dozens of times for prototyping, photos, etc without any cosmetic damage. I totally understand the concern though. I was also concerned about that when I first started making these but there wasn’t any evidence of scratching so I felt comfortable proceeding with the design. Haven’t heard any negative feedback from buyers about scratching either.
Got this for my 2018 1500 z71 Silverado! Works great with my Stryker 955 and very secure! Now If I could just figure out my noise issue coming from the truck I’d be set :)
Do you make one for a 2004 Silverado 2500 HD?
Not at this time. I will note that model year for our development pipeline though. Is this what your center console/jump seat looks like? i.ytimg.com/vi/fzncvKAHwtQ/hqdefault.jpg
@@SKYMO-USA mine ( a 08 silverado) is a bench seat
@@blitz9227 We have this one for 07-13 Silverados now. Should work if your console matches the one in the listing photos: skymousa.etsy.com/listing/1585373463