Hi, this is a nice tutorial. I reproduced the same structure (got the same result for s11 and s21) but when I extracted permittivity and permeability, I'm getting this error message: error in evaluating define function (10023) array index out of range, Could you please suggest me how to resolve the problem. Thanks!
Hai, i would like to ask your help about amc unit cell design. Actually i had design the amc unit cell by refer to the previous paper and i had follow them design parameter. But, unfortunately i did not get the same result. I hope you can help me to solve this problem and i appreciate your kindness towards this matter.
www.researchgate.net/publication/261237926_60_GHz_triangular_monopole_Antenna-on-Chip_over_an_Artificial_Magnetic_Conductor Thank you for replying me. This is the link, i had design Rectangular AMC (R-AMC). Can u give me suggestion maybe i had did some mistake. @@Mathswithahmad
@@Mathswithahmad based on that paper, i try to do the simulation of R-AMC but the reflection phase simulation result of R-AMC i did not get what i need. I hope and appreciate you can suggest and teach me what i need to do.
@@Mathswithahmad For ground plane and metal 1 i used copper annealed which the thickness of ground plane is 0.035mm and thickness metal 1 is 0.000818mm. While thickness for silicon substrate is 0.29mm
Why is the effective thickness 2500 ?
hai, can i know exact value of effective thickness should me 2500 or 2.5mm? can u please let me know?
Could you tell me please why I got so many s- parameters .... I mean till szmaxx and szmin 18....it must be only 1 and 2 ...I choose no. of ports 1.
your floquet port should change from 18modes to 2modes only
Hi, this is a nice tutorial. I reproduced the same structure (got the same result for s11 and s21) but when I extracted permittivity and permeability, I'm getting this error message: error in evaluating define function (10023) array index out of range, Could you please suggest me how to resolve the problem. Thanks!
I simulated my design by the similar steps you have shown in this video. But it is showing error
Error ?
Hai, i would like to ask your help about amc unit cell design. Actually i had design the amc unit cell by refer to the previous paper and i had follow them design parameter. But, unfortunately i did not get the same result. I hope you can help me to solve this problem and i appreciate your kindness towards this matter.
Which design. ...
www.researchgate.net/publication/261237926_60_GHz_triangular_monopole_Antenna-on-Chip_over_an_Artificial_Magnetic_Conductor
Thank you for replying me. This is the link, i had design Rectangular AMC (R-AMC). Can u give me suggestion maybe i had did some mistake.
@@Mathswithahmad
@@Mathswithahmad based on that paper, i try to do the simulation of R-AMC but the reflection phase simulation result of R-AMC i did not get what i need. I hope and appreciate you can suggest and teach me what i need to do.
@@Mathswithahmad For ground plane and metal 1 i used copper annealed which the thickness of ground plane is 0.035mm and thickness metal 1 is 0.000818mm. While thickness for silicon substrate is 0.29mm
You just need a phase curve
Why you have chosen the effective thickness of the material sample to 2500?
The substrate thickness
@@Mathswithahmad but 2500?its 2.5mm correct
@@ishita1987 hai, can i know exact value of effective thickness should me 2500 or 2.5mm? madam can u please let me know?
i need tutorial for EBG design bro....... it's urgent please..........