Thanks for the video, I implemented with same conditions and I got resonances at 5.5,8.2 and10.5 GHz which is different from the paper. And also please explain how this structure is better than the structure with spits on outer ring but no splits on inner ring. Thanks in advance.
Can you explain why we are applying those boundary conditions along the y and z axis? And what is the eigenmode analysis whether similar boundary conditions apply there also
how do you know that the reflected wave is polarized in the opposite axis (x-y)? is there any direct correspondance between the plots that CST shows you and the graphs shown in the paper?
Plz explain the boundary condition you have used ,why you used zmin= Et= 0 and Zmax = open ,plz reply soon.because in your other video you have used conducting wall for simulation .plz explain all these conditions.
Hello sir, ur video it’s very help me. but i wanna ask u, can this tutorial be implemented for an anechoic chamber at s-band frequencies ? i hope u kindly to answer this question i’m very interesting for learning this CST, thank u sir 👏🏻
Thanks for the video. if have to design a unit meta reflector cell at 2.4GHz how should i approach is there any expression regrading structure dimensions and reflection.
Hi, I am simulating a frequency selective surface and I have used your method for finding the S-parameters but I also want to test it in the Transient solver to study the far-field behaviour around my model by using the same model but with periodic boundaries instead of unit cell boundaries but whenever I test it out the model seems to ignore the S-parameter behaviour that was found in the F-solver. Is there a way to fix this?
Hello, Sir First of all, thanks for this wonderful video explanation about how to build FSS on CST. I intend to design a FSS (no idea if I use a single or multilayer FSS) for a ressonant frequency of 60 GHz with 30 GHz of Bandwidth. So, I have a question: how to generate a good quantity of measures for my FSS in way to see the optimun result?
hi, in ring part, i am unable to cut by applying the settings you mentioned. video stopped at 1045 and at 1046 it was cut..... where as it does not actually. kindly tell me what parameters you changed to apply this cut. regards
Hi sir, I appreciate your video, and this is very useful for me, thank you., But I am stuck in a problem. I tried a lot in designing metamaterial antenna, and want to obtain some desired results. But after so many attempts, I am no where. I designed atleast 35 metamaterials antenna, but not able to understand what dimensions I chose, so that required results are obtain. Please help.
there are different technique how to design ebg i.e for single band or multiple ...and add with micro strip antenna ... EBGs are different from Metasurfaces
You can select the bigger rectangle and thes select the other one (the one you want to cut it from the other) then press substract (booleen option), it's better.
@@Mathswithahmad Thank you. I am working on a design for metamaterials with permiability near zero at 13.56 MHz would you happen to have a few tips or designs that could help me ? Thanks in advance.
Sir, can u please provide the paper from which this structure is designed
Great job bro. We really appreciate that.
Could you also show us how to simulate an array of unit cells, say 4x4 unit cell array metasurface?
you add nickel meterial brick for cut.it works.but i think using the shell solid tool and boolean- operations may more reasonable :)
Thanks for the video, I implemented with same conditions and I got resonances at 5.5,8.2 and10.5 GHz which is different from the paper. And also please explain how this structure is better than the structure with spits on outer ring but no splits on inner ring. Thanks in advance.
Can you explain why we are applying those boundary conditions along the y and z axis? And what is the eigenmode analysis whether similar boundary conditions apply there also
Nice tutorial. Very good learning.
how do you know that the reflected wave is polarized in the opposite axis (x-y)? is there any direct correspondance between the plots that CST shows you and the graphs shown in the paper?
Plz explain the boundary condition you have used ,why you used zmin= Et= 0 and Zmax = open ,plz reply soon.because in your other video you have used conducting wall for simulation .plz explain all these conditions.
Hello sir, ur video it’s very help me.
but i wanna ask u, can this tutorial be implemented for an anechoic chamber at s-band frequencies ? i hope u kindly to answer this question
i’m very interesting for learning this CST, thank u sir 👏🏻
Thanks for the video. if have to design a unit meta reflector cell at 2.4GHz how should i approach is there any expression regrading structure dimensions and reflection.
please also show how to change incident wave.like x polarized and y polarized
yes please
Why we are getting two waves in the in s parameter output and why we are getting 3 resonance frequency in one wave? Please explain the output part sir
Hi, I am simulating a frequency selective surface and I have used your method for finding the S-parameters but I also want to test it in the Transient solver to study the far-field behaviour around my model by using the same model but with periodic boundaries instead of unit cell boundaries but whenever I test it out the model seems to ignore the S-parameter behaviour that was found in the F-solver. Is there a way to fix this?
There's no audio output. Can you rectify the fault and reupload the video?
Can you send me the pdf of the paper used for the simulation because the link doesn't seem to work. Thank you
Sir how to make Design and Characterization of Miniaturized
Patch Antennas Loaded With Complementary
Split-Ring Resonators
Hi, What the meaning copper - cladding material in the cst program and And what is its symbol in the cst program
Thanks sir but no audio. Please solve this sir.
Hello, Sir First of all, thanks for this wonderful video explanation about how to build FSS on CST. I intend to design a FSS (no idea if I use a single or multilayer FSS) for a ressonant frequency of 60 GHz with 30 GHz of Bandwidth. So, I have a question: how to generate a good quantity of measures for my FSS in way to see the optimun result?
For high frequency, your fss unit cell dimensions goes to decrease and for the band the structure geometry matter...
Sir i want to know how the Zmax and Zmin corresponding to S parameter(S11 S21) , can you give me advice, please , thank you !
How to generate optimum results of the dimensions of your fss structure?
hi, in ring part, i am unable to cut by applying the settings you mentioned. video stopped at 1045 and at 1046 it was cut..... where as it does not actually. kindly tell me what parameters you changed to apply this cut. regards
@Adnan Yousaf don't worry soon i will upload video on these issues
Can I get some idea please. I am working on it right now please
@@adnanyousaf5755 so did you know what the problem is?
@@Mathswithahmad I got the same,so how to solve it?
How to download commercial edition of cst
what is value for d solid 1?
what should be the value of the thickness(t) of the ground plane?
0.035mm
Can you please upload any design and simulation of" terahertz antenna"for biomedical imaging?
Your frequency range
@@Mathswithahmad 0.1 THz to 4THz for breast cancer imaging. please upload
@@Mathswithahmad could you please help?
Do u have any related paper?
@@Mathswithahmad may I send email? kindly provide email id
Hi sir, I appreciate your video, and this is very useful for me, thank you., But I am stuck in a problem. I tried a lot in designing metamaterial antenna, and want to obtain some desired results. But after so many attempts, I am no where. I designed atleast 35 metamaterials antenna, but not able to understand what dimensions I chose, so that required results are obtain. Please help.
how i download this .cst project file
Could you help me with meta lens simulation
Excellent
Could u pls explain equivalent cct
If we need to simulate EBG based microstrip patch antenna,then this same vedio can I follow till EBG metastructure?
there are different technique how to design ebg i.e for single band or multiple ...and add with micro strip antenna ...
EBGs are different from Metasurfaces
@@Mathswithahmad
Can you share any link or paper related to multiband EBG simulation on CST?
Yours help would be highly appreciated!
Search paper in this profile
scholar.google.com.pk/citations?user=a9JGGQMAAAAJ&hl=en
Thank you. I got my answers.
Welcome
How about th excitation!! or the port design!!
by floquet port
What’s the value of s ?
what's the value of s??And plz mention all parameters.
read the paper
What’s the value of s?
Sir, please tell me how to cut in 10:46
You can select the bigger rectangle and thes select the other one (the one you want to cut it from the other) then press substract (booleen option), it's better.
How to get plot between x component of electric field and frequency
@minakashi makkar just show the graph between x component of electric field and frequency in cst and than u can extract also
@@Mathswithahmad I am not getting the point whats the procedure for plot
@minakshi makkar email me, the problem
@@Mathswithahmad okay sir
Please tell me your mail id
Put parameter list value. Why t = 0.035 ? Thank you
It's copper thickness
Simulate an optical antenna structure
how to print this on Fr4 arlon subtrate ?
select from material library. ...see the first video how to design. ..I explained how to select matarial
Which software you used to design that?
CST (computer simulation technology)
i try many time for cut the ring but it is no cut...why?
help me
Make the thickness value according to cut height if not work
Change sign....
I will make another video is soon I will solve ur problem
@@Mathswithahmad ok , i will try
How can I contact with you? It's urgent!!!!
Through e-mail
@@Mathswithahmad Mail Id plz
@@Mathswithahmad I have sent an e-mail.. Please check it sir
Ok
thanks
What is the value of h
pubs.aip.org/aip/jap/article/121/4/045103/167797/Ultra-wideband-cross-polarization-conversion
h = 2.4mm
Whar is the value of t?
Which one is S11 and S12?
This simulation in flouqat mode. Open cst software Go to cst help botton and search fss than study the tamplate
no sound
i need HFSS design
i want material, good video.
Please make a video on a design of miniaturized patch antenna using hfss 15... please please please .it's urgent and important
how did you cut ring?
Excuse me, can you please provide the parameters for ground plate? Thanks
thicknees is ,t=0.035
L*W=7*7 , e.g lenght *width
@@Mathswithahmad Thank you. I am working on a design for metamaterials with permiability near zero at 13.56 MHz would you happen to have a few tips or designs that could help me ?
Thanks in advance.
@@Mathswithahmad why t = 0.035
upload some more
ok
👍
sir i am designing sensor by using metamaterial if you please share your email then i will contact you and if you solve my problem i will pay you.
@@Mathswithahmad thank you sir
I need a design so how to contact you
Can I have you r email pls
Check about channel
@@Mathswithahmad I didn't find it