I agree,but I can't do it anymore for now but if you're a Jock the system is all over you like "A Sailor on your SISTER ! "...Goodonya - it's been 50 years coming for a pat on the back for me and only a Bikie gang did that 😶Trev New Zealand
Eastsliders...We do we get SOME of. those cheaper tube framed bikes from China....hunt around ,their on or were on the horrible site TradeMe auctions or Trutest used to make whole bikes or parts you could buy out of Auckland - even got a Road named after them ''Trutest Lane' I think it's called ,back in the 1970's...so they. Are out there just both these models but if your Hearts set on a USA job give a colleague a ring in California, he'll give you a good price to export one to NZ for you...his trading name is Kiwi Connections in Gardena, tell him Trev from the Electronics Store sent you 🤗 I'd build you one if your serious but can't right now,..getting over a massive Stroke that nearly killed me & most of my tools,Plant & equipment got robbed $250k once word got around, damb low-lifes.Goodluck Trev Wgtn New Zealand 😎
@@trevinskiking2165 I have a polytech frame if you know the one, but modded it up.....the biggest thing I wish we had access to is the go fast parts more than anything.......been trying to help the scene along with Mini Bikes Nz on Facebook and have made good friends through Mini Bikes Wellington also.....I'm sorry to hear about your health brother, wishing you a speedy and full recovery! If you are on Facebook please look up my mini bike page I'd love to get in contact
That is a sick looking bike bro love the stretch job, I’m 6 feet tall and that’s something I’ve always wanted to do on a mini bike. I have a 5 horse Honda that would work very well on it, not looking to race it just have fun with it. Thanks for the video and ride safe.
@@turbolaser24 Unless you have the advantage of being able to do most of the work yourself & access to some Parts etc in the U SA in particular : it's a matter of " Speed COSTS, how fast do you want to SPEND " - unlike the much despised "Old days"...😶T NZ
Love the pride and care you take with your build! So many people are in a rush but it shows yours is done with great care and time! Was wondering what length your extension tubes are and did you plug weld them also?
Nice work Bobby....Could you please tell me about the table you're working on? Am looking to do some of this kind of work myself. I have several frames and tons of parts just waiting to be modified. I c one stretch coming with two motors and two rear wheels...Anyhow, thanks for the awesome videos...My bad, I guess I should have followed the rest of your links, right to the Chop Source Fab Table...
Nice fab. Work. And great video. My only issue is why didn't you paint the bare metal.?? I would have at least grab a rattle can of grey primer and primed the bare metal surfaces so they don't rust.
@@darrylcook679 buy yourself a cheap 2nd hand little 115 bolt. Home handy style Arc welder with high & low trappings & run some up hand & down hand beads from there.A model # won't be of use to you Trev New Zealand
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I have a Baja bug (doodle bug)mini bike in my garage. Been sitting back there for 15 years, complete and original. I need to stretch it! Awesome video
First time here super cool and that stretch bike behind you is sick
I dig the stretch... good work on adding the gussets....
Thanks I appreciate it!
You sir are a bad ass! Greatly admire your work who needs sports heros all that bs when there are craftsman like you we can look up too.
Thank you so much for the kind words! I really appreciate it alot!
I agree,but I can't do it anymore for now but if you're a Jock the system is all over you like "A Sailor on your SISTER ! "...Goodonya - it's been 50 years coming for a pat on the back for me and only a Bikie gang did that 😶Trev New Zealand
They look better stretched for sure, NICE WORK!!
Wife did rad on the intro. Glad to see you making vids again. .solid work as always bro
Yeah she finally was able to get to it. I think the way I did this one is how ill do the majority of them.
Intro was great and love the new bench setup. Great to see new video. Keep it up man
Thanks bro! Feels good to make videos again!
Wish we could get those mini bikes in New Zealand. Good job!
Thanks!
Eastsliders...We do we get SOME of. those cheaper tube framed bikes from China....hunt around ,their on or were on the horrible site TradeMe auctions or Trutest used to make whole bikes or parts you could buy out of Auckland - even got a Road named after them ''Trutest Lane' I think it's called ,back in the 1970's...so they. Are out there just both these models but if your Hearts set on a USA job give a colleague a ring in California, he'll give you a good price to export one to NZ for you...his trading name is Kiwi Connections in Gardena, tell him Trev from the Electronics Store sent you 🤗 I'd build you one if your serious but can't right now,..getting over a massive Stroke that nearly killed me & most of my tools,Plant & equipment got robbed $250k once word got around, damb low-lifes.Goodluck Trev Wgtn New Zealand 😎
@@trevinskiking2165 I have a polytech frame if you know the one, but modded it up.....the biggest thing I wish we had access to is the go fast parts more than anything.......been trying to help the scene along with Mini Bikes Nz on Facebook and have made good friends through Mini Bikes Wellington also.....I'm sorry to hear about your health brother, wishing you a speedy and full recovery! If you are on Facebook please look up my mini bike page I'd love to get in contact
That is a sick looking bike bro love the stretch job, I’m 6 feet tall and that’s something I’ve always wanted to do on a mini bike. I have a 5 horse Honda that would work very well on it, not looking to race it just have fun with it. Thanks for the video and ride safe.
Thank you I appreciate the kind words! That is what I like to do is just have fun, no need for super fast speeds.
@@turbolaser24 Unless you have the advantage of being able to do most of the work yourself & access to some Parts etc in the U
SA in particular : it's a matter of " Speed COSTS, how fast do you want to SPEND " - unlike the much despised "Old days"...😶T NZ
Looks great Coming along nicely.
Thanks!
I wish you would have left the rear grab handle sunomise with the doodle bug but a great job as usual 👏
Great work bud looks so awesome
Thanks I appreciate it!
@@turbolaser24 your doing some awesome cool stuff in the business bud I’ll be watching and learning
Impressive work brother love the videos 🤟🏾
Thanks! I appreciate it alot!
This is dope asf I'm getting ready to do one with a 1 foot stretch on the frame. This was a inspirational video
Lol I like how wifey didn't want to scare you so flashed the lights
Haha yeah she does that
Very nice man keep it up
Thank you!
Love the pride and care you take with your build! So many people are in a rush but it shows yours is done with great care and time! Was wondering what length your extension tubes are and did you plug weld them also?
Thank you I appreciate it alot. The extension was 6" and yes I plugged welded them as well.
Im about to do the same thing but only 3". Though I am considering taking 3" out of the height at the same time
Nice work Bobby....Could you please tell me about the table you're working on? Am looking to do some of this kind of work myself. I have several frames and tons of parts just waiting to be modified. I c one stretch coming with two motors and two rear wheels...Anyhow, thanks for the awesome videos...My bad, I guess I should have followed the rest of your links, right to the Chop Source Fab Table...
Hi, what is the table you are working on called?
Nice fab. Work.
And great video.
My only issue is why didn't you paint the bare metal.??
I would have at least grab a rattle can of grey primer and primed the bare metal surfaces so they don't rust.
Thanks, its my friends frame and he got it powdercoated
Followed from Thailand🙏🙏🤩🚚
Thanks!
What size tubing did you use? 7/8th 14ga?
Im not sure where to cut the frame, any tips on measuring for the right fit 6’’
I just cut back in thseat area where the tubes are parallel with each other
@@turbolaser24 oh ok i see thank you
Where can I find the hydraulic brakes?
Do you sell that break, mount bracket by chance
Nice👍.. Where can i get tires like those . Thanks
Thanks! These came from gopowersports
@@turbolaser24 thank you sir
What tool did you use to cut the tube at 12:52?
My Milwaukee m12 band saw
Looks good
Thanks!
How much is your weld on drag rear for doodle bug
That is 75 plus shipping. Ill have to check on shipping to Canada
@@turbolaser24 1 word - Heaps GST & Duty etc
What size rear tire is that and is it the original rim please help
Where did you get the suspension forks from?
Ha Brian..."commercially sensitive info"... I'd say noting no reply.Trev NZ
Hey bud how much would it cost if i had u extend my frame?
Where you located buddy?
I'm in Oklahoma
did you sleeve or butt weld these joins?
The extensions have sleeves machined onto the ends.
@@turbolaser24 now that's a smart idea!
What type of welding machine are you using
I have an HTP Pro Pulse 220 MTS
I want to learn how to weld
@@darrylcook679 buy yourself a cheap 2nd hand little 115 bolt. Home handy style Arc welder with high & low trappings & run some up hand & down hand beads from there.A model # won't be of use to you Trev New Zealand
With those tires it looks like you need to extend the kick stand
Its actually a pretty good height.
Can I buy those frame extension tubes?
My friend bought them from studz hardware
www.studzracing.com/
Whats pipe dimensions
The motor should be at the back
How much the kit
I'm not sure, it came from studz hardware