Good morning Edwin, really nice work and repair. I have told you before, over here in the states they would have threw that door in the dumpster and not given it a second thought. Insurance companies won't repair anything. Great job, you take care.
Good afternoon Edwin, I forgot to ask you where you got that nice wide blade that you used on the filler. Really made the final filler product nice and flat and straight. Thanks and you take care.
the end result looks good, some minor distortion, but hit or miss when you sand in straight lines, should be crossing your sanding patterns and should use the appropriate semi flexible straight board in an open area
What brand DA are you using, and where can I get me couple of those hand wooden spreaders such as the ones you slways work with? Thanks and your videos are very appreciated🙏👍❤
Tenho apenas sessenta anos,mas quando for grande quero ser pintador de carroços..(Há mais de quarenta anos que tenho o prazer de exercer essa ingrata e delicada profissão)..
220 / 5000 Resultados de traducción Hello, your video is very good, it is very instructive and I appreciate you sharing your experience, a consultation in minto 50 do you spray with water or some cleaning solvent? I congratulate you very well on your work. Greetings from Argentina
Lot's of people ask what clear you use , all good garage use the we can say 'good' clear , the best is expensive Clear , i use DuPont or Cromax that that same , but they great super realy , even if you are not professional peinter , try it , i spray for over 15 years in France (i'm not french) , but realy it's good stuf end good Clears (not cheap) but realu ^pro :))) good luck to all :)
Too short sanding block - you never get door profile right with that. Its against physics. Short sanding block - there is no support area, where door profile/curve/bend should be "copied" and continued. You just sand one small area and curve with putty that area outiside to look ok. But actually it could be out of original door profile. You have to "bend" original profile to damaged area and thats why long sanding block copies that and are ment to use. Flexible here, maybe Durablock. Just my 2c.
Very very nice job 👌
Wish you the best
Good morning Edwin, really nice work and repair. I have told you before, over here in the states they would have threw that door in the dumpster and not given it a second thought. Insurance companies won't repair anything. Great job, you take care.
Je bent geweldig.mooi gedaan.
Good afternoon Edwin, I forgot to ask you where you got that nice wide blade that you used on the filler. Really made the final filler product nice and flat and straight. Thanks and you take care.
Asi se hace un trabajo . Aplaudan compañeros . Very very very good
Dhar kha Austaz G
Sigues siendo mi ídolo 🙉
❤ very nice work ❤
the end result looks good, some minor distortion, but hit or miss when you sand in straight lines, should be crossing your sanding patterns and should use the appropriate semi flexible straight board in an open area
What brand DA are you using, and where can I get me couple of those hand wooden spreaders such as the ones you slways work with? Thanks and your videos are very appreciated🙏👍❤
What kind of primer is this suitable for metal?
Can you show the metal work also?
Very time consuming job, but looks great
You are the best.
Tenho apenas sessenta anos,mas quando for grande quero ser pintador de carroços..(Há mais de quarenta anos que tenho o prazer de exercer essa ingrata e delicada profissão)..
Great painter HI, what clear do you use, how do you mix it what nozzle , THANK YOU
Billy Fowler
Top job as usual Ed you wizard
great job man 👍 it is true that at asiatics the paint layer is thinner from factory ? And which are the best brands at paint in your opinion
220 / 5000
Resultados de traducción
Hello, your video is very good, it is very instructive and I appreciate you sharing your experience, a consultation in minto 50 do you spray with water or some cleaning solvent?
I congratulate you very well on your work.
Greetings from Argentina
Its crazy how much time you got to play with the filler. Whay brand is it??
He is good
Привет:Как называется шлифовальная машинка?
Please come to nigeria and open your Branch
Maybe i will😆
Hello colleague great work is👋😉👍
Hows this difficult? There are no dents? I finish the basic shape in 1 hour
NNP.... that car also faded out color ?
Bon travaillé
Lot's of people ask what clear you use , all good garage use the we can say 'good' clear , the best is expensive Clear , i use DuPont or Cromax that that same , but they great super realy , even if you are not professional peinter , try it , i spray for over 15 years in France (i'm not french) , but realy it's good stuf end good Clears (not cheap) but realu ^pro :))) good luck to all :)
Great job bro nice when the next video
C'est cool
wish i had the patience .. i was ready to paint @11:00
Me too, that job is very time consuming. I still want to learn!
Super👏👏👏👍💪💪💪
Uitstekend werk...!!!
It good video but the process of drying it can be cut
Do you sand with no pretective mask?? are you crazy?
،👍👍👍👍👍👍👍👍
A đù trình độ rứa mi ơi
SoppeR❣️ JoB💪
👍👍👌
working at a dealer ?
Too short sanding block - you never get door profile right with that. Its against physics. Short sanding block - there is no support area, where door profile/curve/bend should be "copied" and continued. You just sand one small area and curve with putty that area outiside to look ok. But actually it could be out of original door profile. You have to "bend" original profile to damaged area and thats why long sanding block copies that and are ment to use. Flexible here, maybe Durablock. Just my 2c.
👍👍👍👍👍👍👍👍👍👍👍👍👍
👍👍👍💥
perfect job!!!!!!
👍👍👍👏👏👏👏👏👏👍👍
😷😷😷😷😷😷😷👍👍👍👍👍👍👍
huuuge bump
Like bit of bondo , work me.?
57:56
30:46
27:23
26💪💪💪💪💥💥💥💥💥🔥🔥🔥🔥🔥🔥👍👍👍👍👍👊👊
You
Richtich scheise....
Криво
Wow :-)👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🌷👍