Low Clutch Bite Point? How I Did a Quick Fix. Freelander and other cars

Поделиться
HTML-код
  • Опубликовано: 8 фев 2025
  • Is your clutch bite point too near the floor? Fed up with trying to bleed out the air but with no success? Tried forward and reverse bleeding but still no success! Here is how I did a quick fix by extending the clutch peddle travel, so any last bits of air in the system that won’t come out don’t have such a significant effect.
    After fixing the clutch the bite point was another 1- 1.5 inches higher up so was a huge improvement. Well happy with it. Hopefully it should last. This modification just allows for more pedal movement and moves the pedal up so it starts from a higher point. There is extra movement in the master cylinder that is not being used and this is now taken advantage of. Moving the bite point higher means that you also get better disengagement of the clutch and hence nicer gear changes.
    All you need is some drill bits (and a drill). You need. 13mm and a 6.5mm bit. Here are some nice cobalt ones on Amazon which are best: Amazon UK: amzn.to/2PcI44A
    Or Amazon USA: amzn.to/2DbS35p
    Rubber disposible gloves are also useful, here's the links for
    eBay USA: ebay.us/GGqmTJ
    eBay UK: ebay.us/cE1BHK
    Amazon UK: amzn.to/3aikbl8
    Amazon USA: amzn.to/3cdwjpD
    Amazon Canada: amzn.to/2Q0VHZm
    Amazon Australia: amzn.to/2QlUawX
    You need to find a piece of hard plastic, aluminium or other hard material. I used a wire brush handle! Have a look on those Amazon links for something suitable.
    If you have a k-series petrol engine Freelander or MGRover instead then this fix for the slave cylinder mounting should help: • How to Improve the Clu...
    If you have a Rover or MG then this video on changing the pivot point on the clutch may also help: • How to Improve the Clu...
    Videos of fixes on this Freelander TD4 so far:
    Rear window fix: • How to Fix Freelander ...
    Crankcase filter upgrade to cut smoke: • Freelander TD4 - M47 c...
    Changing the LP fuel pump and fuel filter: • How to Change the Fuel...
    Fixing air leaks on corroded alloys: • How to fix an Air Leak...
    How to clean the intercooler to cut smoke: • How to Clean the Inter...
    Fixing the fuel burning heater (aux heater): • How I fixed my Fuel Bu...
    Fixing the clutch, low bite point: • Low Clutch Bite Point?...
    Fixing the HP fuel pump regulator: • Fixing the HP Fuel Reg...
    Fixing electric window cable, done on this car, video was on another: • How to Fix an Electric...
    Other Freelander videos of mine that may also be useful:
    Fitting a low coolant alarm: • How to Fit a LOW COOLA...
    Fixing the SRS warning light:
    • SRS Light On? This May...
    Making the petrol k-series engine reliable: • K series - How to Make...
    How to fix & monitor VIS motors on the 2.5 V6 engine: • How to Fix VIS Motors ...
    Starter motor fix (generic Bosch): • How to Fix a Starter M...
    Fixing a torn car seat (generic): • How to Fix a Torn Car ...
    Clutch slave cylinder fix on petrol k-series cars: • How to Improve the Clu...
    How to fix the rear electric window: • How to Fix an Electric...
    How to change the 2.6 V6 (KV6) engine cambelts, cheaply! - • How to Change the Camb...
    Check my channel comeinhandynow for other useful videos like calibrating a torque wrench, tips for making brake pipes, checking wheel alignment plus lots more DIY and reviews. Here: / @comeinhandynow
    If anyone wants to show appreciation for any money savings, use this link:
    paypal.me/comei...
    Subscribe to the channel for similar DIY, fixing stuff, car bits and tech reviews here:
    www.youtube.co...
    Note, if you want to be notified of new videos click on the bell symbol on my home page.
    The video is about my personal opinion and experience and contains no paid for product placements. No responsibility is accepted for any perceived recommendation for or against a product or feature nor any consequential damage or harm since this video is just my personal experience. You accept by watching this video that you accept any responsibility for any subsequent actions or decisions that you take.
    Note on copyright / licensing: This video was created using Apple iMovie and as such any music or video content is fully licensed by their terms and conditions for free publication and distribution. Additional background music free used royalty and copyright free (no copyright songs) from the following source:
    Song “paradise” by Federico Aldinucci
    AndyM -Oasis [Faded NCS Release]

Комментарии • 73