Is this why LGA1700 CPU's are bending?

Поделиться
HTML-код
  • Опубликовано: 16 янв 2025

Комментарии • 25

  • @BeavisGoFIREFIREFIRE
    @BeavisGoFIREFIREFIRE 3 года назад +5

    As a mechanical engineering student going into this industry, this was a great video to stumble upon. Thanks!

  • @Malmes999
    @Malmes999 2 года назад

    The latch system has been around a long time is it Because the LGA1700 is a bigger chip?= more area to bend?

    • @mechitworks
      @mechitworks  2 года назад +2

      Mostly because it is a longer chip. with more force (each pin has the same force needed. so going from 1200 to 1700 pins adds a lot of force)

  • @abaj006
    @abaj006 2 года назад +2

    I wonder if the excessive heat generated by these 12th gen CPUs also plays a role in the warping?

  • @tilburg8683
    @tilburg8683 2 года назад +5

    Mine bend so bad it won't boot with a after-market cooler and with the stock cooler it hits 100c in seconds and throttles to half speed....
    Possibly last time I ever buy intel(unless amd will end up making the same mistakes) I'd rather have AMDs hot power hungry cpus that atleast don't bend.

    • @markodimic
      @markodimic 2 года назад

      That's really strange.
      Could you tel us the exact cpu, cooler and mb?
      I'm really interested to know more since I planed to get alder lake, but not sure anymore.

    • @MissMan666
      @MissMan666 2 года назад +1

      Ehh, AMD's CPU are generally more power efficient.

    • @tilburg8683
      @tilburg8683 2 года назад +1

      @@markodimic I'm pretty sure it was a Asus b660 gaming wifi g or something with a i3 12100.

    • @markodimic
      @markodimic 2 года назад +1

      @@MissMan666 hmmm not sure about power.
      I first wanted to get 12400f, But I was like, ok alder lake is bending, let's get some am4 AMD like 5600(x) and found out that many users are complaining about usb problems when using gen4 pcie. Even after lates Bios updates.
      So, maybe I skip this generation, and wait for am5.
      I'm really sad, because I was crazy into that 12400f

    • @markodimic
      @markodimic 2 года назад

      @@tilburg8683 haha.
      I wanted to get 12400f with Asus tuf b660m wifi .
      So you probably saved me headache and money . 🍺

  • @malpigwalt
    @malpigwalt 7 месяцев назад

    I just finished 1 week adventure to make dual channel memory working with with asus z690 mainboard....... less pressure on cooler screws and adding washers under cpu holding mechanism helped.
    Junk i must say.

    • @danilaer2551
      @danilaer2551 2 месяца назад

      1mm washers or bigger? whats the material ? a neylon?

    • @malpigwalt
      @malpigwalt 2 месяца назад

      @@danilaer2551 1mm, yee plastic ones

    • @danilaer2551
      @danilaer2551 2 месяца назад

      @@malpigwalt so the system still alive and working well? you tried to overclock memory? any new errors\blue screens ? ive been thinking about buying a deformated 12100f and use it with thermalright lga1700 or washers

    • @malpigwalt
      @malpigwalt 2 месяца назад

      @@danilaer2551 Yep all works good. Without washers was problems, with all working well, memory overclocked.