How to mix Plaster of Paris - Satyen Sharma
HTML-код
- Опубликовано: 6 окт 2024
- Here I'm sharing not only the perfect ratio in which Water and Plaster of Paris should be mixed but also which component should go first.
Before knowing how to make Plaster of Paris mix it is important to know mixing materials behavior first. Otherwise no matter how precise one is can't get the desired result.
It seems very simple mixing water with Plaster of Paris, but the twist is which everyone ignores that what should be mixed in what. Either A into B or B into A.
Because that will change the output of composition.
Here I'm sharing side by side what happens when one compound is put into other and vice versa.
What are the pros and cons of the same? Based on which one can decide what desired result one is looking for.
This tutorial is the best guide for making perfect
Plaster of Paris Solution.
Moreover, attached are some other links showcasing how this mixture can be used to create artworks such as a chocolate bottle.
• Valentine Day Gift
/ @satyensharma960
FACEBOOK PAGE:
/ creativeants2016
WEBSITE:
creativeants.co...
I hope this tutorial gives a better understanding of the components and guidance how to use it.
Thanks.
gyan dene se gyan badhta hai sahi jankari ke liye dhanyavad
For my projects, I think the second option is more suitable. Thanks for showing the difference.
Waste of time!!!
I have actually done this both ways, depending on the volume needed. Small volume needed and mixed on a flat surface I do the powder first and slowly add water sometimes even using an eye dropper. Larger volumes in a bowl, adding powder to a preselected amount of water, letting it soak and absorbed till it's ready to mix and use. However, looking at the amount of volume of water in your cups, it did not look like it was filled to the same level as the powder in one cup. Optical illusion?
Thank you for saving me,i really need this
I think your tutorials are of the clearest and most demystifying of all the tutorials I have watched on this. I hope you wouldnt mind me asking you for some advice. I bought some flexible silicone moulds that I want to cast POP in for thin clay decorative embellishments. I want to know if you have ever Cold glue/white glue with your mixture to make it more sturdy? There are other tutorials that recommend 2 parts POP, 1 part water and half part glue? Would you recommend this? I tried to do it with crack filler but the casting came out too crumbly and my castings all fella part when I tried to unmould them. I think the glue would make it flex a little more so that I can gelt it our of the mould but I am wondering if I should make the ratio 2 parts POP, 1/2 part water and 1/2 part cold glue?
Thanks for the appreciation. I work on polymath and keep exploring different materials. You may check my link and recent artworks.
instagram.com/sharmasatyen
Further to your query you can use white glue positively as it prevents in cracking and more durable when POP dries. For mixing I suggest go with 3/4 water and 1/2 white glue mixed first. It will bring consistency in the solution and then later mix with POP. Other wise you may end up in half mix and half lumps. Hope it helps..:)
@@satyensharma960 thank you very much!
Thanks for the question Candipill Tincan. I was about to ask the same. I need to make some cases for selling, so I need them sturdy enough to be worth buying.
Thanks for the answer Satyen. You have captured it well. Just like I needed it.
Would the same work for white cement? What would the right ratios be like?
Thanks again.
This is very helpful.
God bless you.
Thanks so much 👏👏 l like pouring the water in first method.. I'm so happy I came across your viedo. I'll be working with plaster of Paris on Halloween projects this year..the plastdr has been sitting in my garage fot 2yrs waiting on a project. Thanks again 😛
This is a very informative video. I've been looking this directions and those that you've given in the comment section.
Your followers have some great insights too.
Now, what would be the right consistency/method for decorative vases/pots.
Secondly, what are the right ratios using white cement, white glue and water for vases. I would like to make them sturdy for selling.
Thanks in advance.
Amazing explanation of comparing the differences.
Never thought of this , thank you , so first the water 😊🙏
I was always making mistakes now I know why.. thanks for the video 👍👍👍💕
Thank you! I did not know this. To me it is interesting, that just by how you do the water can get two textures.
I'm definitely following the first option for my diy pots. Thanks for a smooth and non complicated tutorial!
What is the best option for pot making?
I can't lie. I do see a difference. Thanks
Great lil test. Definetly a difference, will be putting this to use. Thanks!
GREAT VIDEO, I'm new to plaster of parris, this is fantastic info. ty
I like it is vary nice to know all this how to use the plaster of Paris🤔
Wow!! Can definitely see the difference... Can I pour this mixture into a cone and use as lining for a drawing??
You asking for relief art ! ..you can but I suggest to go for marble powder that is more durable..hope it helps.
best vidio i have ever seen about plaster of paris
We’re having trouble with our plaster of Paris going mouldy after letting it dry why is this happening please
Thank you for your advice much appreciated.
Thank you, I'm using first method for my diy!
Very nicely explained 👍🏻👍🏻
Thank you so much for the process Sir.
Thank you!! Really helpful
Thank you for the video this video is a lot for mee
hello thanks for the help what I meant to say was my POP got stiff while mixing using both methods it did not stay liquid and lovely like yours did after 2 minutes it was too stiff to pour that is why I asked did my POP go bad. and I used cold water for both methods thanks again
Yes ! shelf life of POP is 3 - 6 months..that might be the case I think.
@@satyensharma960 first of all thank you for this simple informative vdo.... cleared my doubts on where i was going wrong after wasting 5kgs of POP lol. Always, now i know what to look out for when buying POP. This little date of expiry info wasn't mentioned where ever i searched. Glad i came across your page. You have one more subscriber now!
@@bkumar3670 glad it helped.. follow for my artworks at instagram.com/sharmasatyen
thanks again and happy new year you have helped a lot
Thanks! I was wondering why the plaster looked so watery! How in the world am I supposed to use it in this state?! Lol
Hello, is there a food safe or close to food safe acrylic sealer that I can use for plaster of paris?
I try to use plaster of pairas.. but it becomes like a stone after 10 to 15 seconds... i am not able to use it.. it dries quickly.. even in 10 seconds
Vry mch TQ for th show,.
ITS' A vry gud info👍
Great video! Thank you!
Great review! Thank you!!!
1200 degrees heat absorption.. well that decides it... 😳👍
Hi, shouldn't we add white glue to this mixture? For the plaster to get fixed on the surface
Great video 👍
my mixture dries up quickly.. any reason why this is happening ? I did make the mistake of stirring it too soon :(
Thanks for sharing such a nice information
your welcome
Very nice vedio thanks for help my pop developed lumps but not after i saw this vedio
thanks again😁😁
k
I'm Glad.. it worked for you:)
Thank you for this video!
Very nice video. By the way which one to use if I want to make molds. Also, can I make molds using kids toys like peppa pig. What should I do to get peppa pig mold. Please help I want to make it for my daughter and then let her paint it. Please help
Glad you liked it .. I suggest to go with option 2 as it is dense and viscous. Less chances for air to trap. For molds check online easy to use for all purposes.
Sharing a link here, hope it helps:
www.amazon.in/JoyGlobal-Silicone-Chocolate-Sugarcraft-Decorating/dp/B07FP14FBL?tag=googinhydr18418-21&gclid=CjwKCAiAodTfBRBEEiwAa1haupGydjYN4xe3-ajRMMmFkGo-CmieeJYurHyAecXbJLS3s59iNgL5IhoC6soQAvD_BwE
Wowww what a wonderful tutorial 🙌👍Thank you so much 🙏🏻🙏🏻
God bless you
Thank you!
Very helpful. But ky glue and plaster mixture always cracks how to fix it.
Thanx for the tip
Thanks....after watching ur video the mix turned toooooo good
Lavanya Nair I'm glad you liked it. Chk my FB page to see more creative stuff. facebook.com/CreativeAnts2016/
Nicely done, thank you.
But why is it like milk it's supposed to be dry
For my project, i think the first option is more suitable
Can a plaster of Paris pot be dry in only 10 hours in hot climate?
Thanks for sharing 👌
Great instructions
I do like option 1.
Thanks ❤️
Nice to see new friend 🙏
If u don't move it then there's lumps
Does anyone know what the temperature of the water should be?
Normal tap water is fine. Cold or normal cold
nice video and great tips
Cool, a very useful video.
Thanks very nicely explained
One query within how much time it will start hardening.
Cool…normally it fully dries in 1-2 hours.
Water powder ratio, this we have learned in our dentistry degree
Awesome video brother
Good job swapping the bowls at the end for clarity! 😂😂😂
Color coded.
Can this mixture be used to repair cracks on my cemented roof?
I'm afraid not.
Very Good info 👍
But the little cups don't giv us a exact measurement of how much? Like is it 2 measuring cups or ? Does the little cups equal a cup using a measuring cup? Nobody on here really giv the measurements. Why i don't.
I've learned that a pound of p of P will half fill a 10 inch pie pan.
Thank you
Thanks for such a nice video .....How to reduce air bubbles ??
Arpita's Creation vibration table
Arpita's Creation spray it with rubbing alcohol to remove bubbles
I was just wasted pop to make a pot
After spoiling my full pop I came here to see how to mix pop 😒
Can I use the baby powder bottle?
Good video
Make video on gypsum mixing thanks
plaster of paris is what you get when you mix gypsum with water
Hi....I want to take my daughter's foot print ......can I take on plastic of Paris??
You can..do add fevicol to the mixture to avoid cracks.. when it gets dry and then later add a paint coat to seal it.
Hello my POP set up so fast using the water first and water last version I used both and is i did not ever get to use it could my pop have gone bad please help
Hi..it depends on the climate how dry or humid air is..use cold water .. POP is a game of max twenty fifteen minutes..by then it's start drying and taking shape..else try using different composition material available in market ranging 5 - 30 min drying period .. Hope it helps.
That is information video... Thanx
Agar hath ma lage toh koi problem hai kia??
should we take cold water or normal tap water?
Normal water
Informative
How to mix pop in clay form please make video on these
Can you use this for the clone a Willy thing?
but i want to make a big structure out of it so how to give the POP more strength and make more stable
From big structure I assume you talking about Sculpture something..well you need to add reinforcement inside and wrap with some chicken mesh..that will hold the paste to your desired form and shape.
@@satyensharma960 thanks satyen
Chicken wire
Or use paper mache (on chicken wire)
How can you make this image tried this both ways
Nice
Thanks for the video. Can one use pop to make beads?
Yes, when you see it becomes semi-solid clay type but you have to be a bit fast before it completely dries out. Also, do layer the beads with color or something, else they will abrade. Hope it helps :)... Do check my other videos how to use this paste to create beautiful display chocolate bottles.
If i am mixing 1 kg Pop then how much water should I use
I wana ask what is drywall or drywall material . Is it plaster of pairs or something else. Cz i hv seen drywall art on youtube.
It's dry wall compound for drywall art.
Thank you, very useful information. If I want to make a flower impression picture and add cement for strength, what is the ratio between POP cement and water? Thank you.
Honestly I haven't done that before..but I wonder why would you need to add cement..for strength you can add reinforcement say iron bars or chicken mesh but that is subjective what you are crafting and size or shape.
Are they the same as eachother after they dry?
Yes..eventually both will be dry..it is just to differentiate mixture you need uniform bubble free for your activity.
Hi…plaster of paris jual kat mana ye?
Achi janakari batai
Please let me know what is the best option to make diy pots? Pink or yellow one? Thanks!
Yellow one for consistency.
Thank you. Very helpful
Can i use calcium sulphate
Sir, Can bowls made of pp be painted with something to make it look like ceramic
In appearance to some extent Yes, just coat the final paint coating with varnish.
@@satyensharma960 thanks a lot
@@satyensharma960 how well does the plaster retain detail while casting for creating molds?
Can I use this mixture to fill tile gaps in bathroom?
I'm afraid not.. It won't retain for long.
Its hard for me to do plaster of paris bcos if i mix it, in 1minutes it bcome hard already if add water to it, it will not hard anymore
Hi i just bought some pop but as i am mixing it it is going lumpy and setting very quickly so i have barely 2 minutes from adding the pop with water before its setting in my bowl before i can pour it please help
Add cold water and use a table spoon of white vinegar to delay curing time..it also depends on the POP quality if it is old or maybe water is hard or soft by mineral content..use distilled water and clean container to mix.
Where will I get pop??
What is plaster