Thanks brother mai le aaya door closer, right door pr left side ka door closer bnakr de Diya tha mere father saab ne...oor khul nhi ra tha...door. fir Maine cap khol k machine ko ghuma k cap neeche lga di. Or fix Kiya door open close bhot ashe se ho ra hai...bhot bhot dhanyawad...
Thik you sir aapka video dekh ke Aaj kisi ka Ghar ka new door closer laga paya pahle toh bahut kosish ki lagne ka kahan kahan holl kr Diya uske door ka 😂 do baat suna bhi par aapka video dekha toh samjh me aaya or success ❤ thank you so much ❤️
Very informative and useful video. It could've become more effective if you show the screw part in full visual & little more. Any thank you for what you've done.
Thank you very much. I will try the side screw to adjust my door because mine comes with a bang making too much noise. I am a housewife. I do most of the jobs in the house myself. Thank you very much for this video clip. Just what I needed to learn the adjustment, God bless
Not correct but misleading information. The manufacturer provides a template diagram along with the door closure and the holes for the screws are to be marked on the door and the frame and the fitting is to be made accordingly. After fitting the door closure the speed of the door is to be adjusted by the speed screw - for increasing it should be moved in anti clock and decreasing, clockwise direction. Similarly for adjusting the latch speed another screw should be moved and adjusted. Remember, while drilling holes on the door and the frame the diagram printed on the paper should be fixed or stucked on the door and the frame. Holes must not be drilled without the help of the diagram. The main arm should be fixed at 90° by adjusting the other screw of the arm. Unfortunately, the majority of the carpenters being illiterate or semi literate can't read and understand the fitting instructions. Don't follow the directions given in the demo, follow the written directions given by the manufacturer only.
अरे भाई जी हमारे एलमुनियम की जो ऊपर वाली स्क्रू है वह बिल्कुल उसे हो गई है और उनका साइज़ ओवर हो गया है साथ ही साथ जो हमारी चौखट है चौखट पर जो दो स्कूल लगे हैं वह लोहे की है तो अब इसका ओवरसाइज जो हो गया है अल्युमिनियम का कीवaad पर इसका समाधान jese kre
you probably dont give a shit but does any of you know of a trick to log back into an Instagram account..? I was stupid lost my password. I would love any tips you can offer me!
Hello Sar Ek Bar aap jitne bhi section Hote Hain Sabhi section Ka Naam Bata dijiye jisse Ham Sabko Maloom ho jaaye kaun se section kis kaam mein Aata Hai Kaun section kitne inch ka hota hai
भाईं आप बहुत अच्छी जानकारी देते हो
Dekhne e liye nahi sir. Batane ke liye bahut bahut dhanyawad. Bahut acche tarike se aap ne bataya hai
Fir se ek baar dhanyawad
Aap bhot he accha door clojar lagatey hay
Bilkul sahi hi.a niyam say kiya gaye hi.
Thanks brother mai le aaya door closer, right door pr left side ka door closer bnakr de Diya tha mere father saab ne...oor khul nhi ra tha...door. fir Maine cap khol k machine ko ghuma k cap neeche lga di. Or fix Kiya door open close bhot ashe se ho ra hai...bhot bhot dhanyawad...
Shi. Trika. Smjhne. Ka. Bhai
Bohot aache bhai helf full vedio hai nice
Sabse accha tarika aapne bataya hai
Thanks bor I'm like bor aluminium like
बहुत खूब सरदार जी
Very nice sir
Thik you sir aapka video dekh ke Aaj kisi ka Ghar ka new door closer laga paya pahle toh bahut kosish ki lagne ka kahan kahan holl kr Diya uske door ka 😂 do baat suna bhi par aapka video dekha toh samjh me aaya or success ❤ thank you so much ❤️
Thank you for your imp information... Good job n keep sharing imp videos
Very informative and useful video. It could've become more effective if you show the screw part in full visual & little more. Any thank you for what you've done.
Jordar aaj mera bhi kaam ho gya
Good job 👍🏻
Thank you very much. I will try the side screw to adjust my door because mine comes with a bang making too much noise. I am a housewife. I do most of the jobs in the house myself. Thank you very much for this video clip. Just what I needed to learn the adjustment, God bless
बहुत अच्छा तरीका है आपका
Bhai sahab aapki video dekhte Mera Dor closure 2 minut mein main 2 din se pareshan ho raha tha aapko tahe Dil se dhanyvad
WELLDONE FOR GOOD GUIDE
Bahut badhiya bataya
Supar sir g
Very Nice video Bro 🤔💯 थैंक यू
Bhayya gate m 4 kbje lgane ki video bnana zaroor
Nice work sir please keep it up
bhai jaan kabutar Ghar Se udhay Aasman Aasman Se Ghar aye khi aur na bethe kya kare bato bhai
स्लाइडिंग डोर कैसे लगाते पार्टीशन
TQ bhai ji
Hellow sir ji.. domal section ke bare me agar aapke pass koi jankari hai to please us par video banao. Ke domal section me window kese banai jati hai.
Not correct but misleading information. The manufacturer provides a template diagram along with the door closure and the holes for the screws are to be marked on the door and the frame and the fitting is to be made accordingly. After fitting the door closure the speed of the door is to be adjusted by the speed screw - for increasing it should be moved in anti clock and decreasing, clockwise direction. Similarly for adjusting the latch speed another screw should be moved and adjusted. Remember, while drilling holes on the door and the frame the diagram printed on the paper should be fixed or stucked on the door and the frame. Holes must not be drilled without the help of the diagram. The main arm should be fixed at 90° by adjusting the other screw of the arm. Unfortunately, the majority of the carpenters being illiterate or semi literate can't read and understand the fitting instructions. Don't follow the directions given in the demo, follow the written directions given by the manufacturer only.
Right
My door now bangs shut with a loud noise I dont like so should I tighten the side screw. Confused diy house wife.
Very good explanation for door closer installation, thanks.
Nic video
Bhut khusi hoti hai sir
Thanks bhai samjhane k liye
Thank you sir;kichen bnane ka trika bi btaya please sir
Sir wel home exclusive looks hardware collection hydraulic door closer legana wala banda manage kara please
agar door round vala ho uper ki side to door closer kaha lgatey ha
Iron frame me kaise lagaye?
Thankyou sir ji
Kabje Ki tarafh se kitni duri pe lagate h isko
Help!!!
Meri door puri band nhi ho rhi... please share some tips
Ye center mai b laga sakhtey hai
Dhanwaad veer 🙏
Bhut bdiya Bai g
1 no. Wala scroo kis kam aata he
Very good bhai 🧡🧡
paji hedal lock kida lagda
Nice
Good work
Very nice ji
Very good
Mast sir aur video dalo
Kabje ke side se kitane inch chhor kar laga rahe ho
Thanks sir
Guru apne chale ko hmesha poora kaam q ne sikhata guru ji😂
अरे भाई जी हमारे एलमुनियम की जो ऊपर वाली स्क्रू है वह बिल्कुल उसे हो गई है और उनका साइज़ ओवर हो गया है साथ ही साथ जो हमारी चौखट है चौखट पर जो दो स्कूल लगे हैं वह लोहे की है तो अब इसका ओवरसाइज जो हो गया है अल्युमिनियम का कीवaad पर इसका समाधान jese kre
pls make video. on cabinet. making at curves
Is ko hatana ho to hta sakte h kya
Good video
Good veere, you are all rounder, even in electricity too
Good work thanks
Bhut bhut thanks 🙏
Thanks for sharing....
Sir ji sliding door me roller lagane ka vidio upload kijiye plz
Door closser lgaye ke bad darwaja poor band nhi ho rha he karib 4-5 Inch khulla rhta he kya karn ho skta he
सर मैने आपके चैनल को सब्सक्राइब किया हुआ है। मै भी एल्यूमिनियम का काम शुरु करना चहता हूँ। कृप्या एक वीडियो स्क्रू का भी बनावें। धन्यवाद
Hello dear mujhe sbhi aluminum section ke name size or kis- kis jagah inka use hota hai
Ki jankari chahiye..?
Plzz btaiye??
0133ततेवQजि6इहगडफम क्सक्सग्जल
Pure pahle Nahin Khuli pure dudh Nahin khul gaya to Uska Kya Karen
Thanks
Good job bro
Nice info
Sar door tiet khul raha hai .use shi kase kare
Aap hamko ye batao ji ki hardolik vala kichaen kaose banate hain
Mast sir
Hamarey pas fatke hay to magar us me nahi laga pa raha hu
Good work Sir
Super
Thanks sir 👍👌
Thank uh sir this is amazing work 👍
you probably dont give a shit but does any of you know of a trick to log back into an Instagram account..?
I was stupid lost my password. I would love any tips you can offer me!
@Connor Lorenzo Instablaster :)
Very nice
Thank you so much very nice god bless you
Chute sale
Alluminium virtical door paaa lock lagana dikaya sir please
Thanks brother
How to adjustments?
Door khichna bahut hard hogya hai kya kare
Good
Bai Sewak mechanical tusi ji?
Good one
Sar aap kahan se ho
Hello Sar Ek Bar aap jitne bhi section Hote Hain Sabhi section Ka Naam Bata dijiye jisse Ham Sabko Maloom ho jaaye kaun se section kis kaam mein Aata Hai Kaun section kitne inch ka hota hai
Thanks Bor
Naya Kya h kuch Naya h to batana
Diwar se kitne door lagana hai.
Mr sewak ki awaz to hai yeh
Thanks.dada
Well explained
Great
Thanks bor
Aapki screw driver machine kaun si company model ka hai
thanks you
please tell best company in India and average price and variant