Question about Bronco shocks. I just bought front and rear and installed them. Since I do snowplowing in winter and wood with trailer in summer I set the preload fairly stiff. When off the bike I can push down on front and it will come back up to where they were.... However when I push down on rear with all my 230 pounds it will sag about 2 inches but unlike the front they won't come back up unless I pull up on machine... Then they come back up. Why is there a difference between front and rear? Both are adjusted the same and are brand new. Any input would be very helpful. I can't find anything online.
Also another question... Can you adjust the rebound on these shocks? I notice a valve screw on bottom. Is that valve only for the loading of the gas? Any info you may have for these questions would be greatly appreciated... Thanks.
sorry to be so offtopic but does any of you know of a way to log back into an Instagram account? I was stupid lost my password. I love any tricks you can offer me.
Would these do better than the stock one on my 2019 polaris sportsman 570 touring? Me and the wife ride a lot and with our combined weight the rear sags a bit still, I replace the springs w/highlifter springs, helped a little bit....now I'm wondering if I need to replace the entire assembly?
Bought a complete set for my rancher…it does perform better than a worn out set but they they adjusted it with too much preload that at max suspension droop I barely got it on…it blew out my new CV boots in less than 4 months…it doesn’t come with a spanner wrench and with stickers on it …😳
I have a 2002 honda rancher. Looking to replace the shocks. I found these on Ebay for a pretty reasonable price as opposed to Elka... how have they stood up? would you still recomend?
double edge sword lol stiffer shock just wears out ball joint but on these brutes the firdt thing ya wanna do is the a arm upgrade kit that elimanates the bearings in the a arms n is replaced with a rod and bushings
I went to your website and couldn't find these shocks. I'm looking for replacement shocks for my Suzuki 700 KingQuad. Any suggestions for those who live in Canada where it seems shipping costs close to 100 dollars like a third of the cost of shocks?
These are 10 percent stiffer, better control and the ability to load more....winches, loads, boats, plows, heavy riders etc etc. A shock can be stiff as heck for a 150 pound rider but soft for a 200 pounder....
RedneckCrazy4 I was simply asking why he went with the Broncos and not Elka stage 1 or 2..thats it..nothing more..nothing less..just curios as why as I know Louis is a big Elka fan so why the Broncos shocks over the Elkas..was it price? Was it something else..just a simple straight forward question
Hope to see more brute modz!! Not to many shops have content for them big brutes!! Keep up the good work
Question about Bronco shocks. I just bought front and rear and installed them. Since I do snowplowing in winter and wood with trailer in summer I set the preload fairly stiff. When off the bike I can push down on front and it will come back up to where they were.... However when I push down on rear with all my 230 pounds it will sag about 2 inches but unlike the front they won't come back up unless I pull up on machine... Then they come back up. Why is there a difference between front and rear? Both are adjusted the same and are brand new. Any input would be very helpful. I can't find anything online.
What tires are you running on the ATV ?
Also another question... Can you adjust the rebound on these shocks? I notice a valve screw on bottom. Is that valve only for the loading of the gas? Any info you may have for these questions would be greatly appreciated... Thanks.
Loved it! You make me wanna get into the big bore game!
sorry to be so offtopic but does any of you know of a way to log back into an Instagram account?
I was stupid lost my password. I love any tricks you can offer me.
@Evan Idris instablaster :)
Would these do better than the stock one on my 2019 polaris sportsman 570 touring? Me and the wife ride a lot and with our combined weight the rear sags a bit still, I replace the springs w/highlifter springs, helped a little bit....now I'm wondering if I need to replace the entire assembly?
my bronco gas shocks have leaked not even 50 miles. is that normal? like some kind of oil came out of the shaft
Bought a complete set for my rancher…it does perform better than a worn out set but they they adjusted it with too much preload that at max suspension droop I barely got it on…it blew out my new CV boots in less than 4 months…it doesn’t come with a spanner wrench and with stickers on it …😳
Do you have the past number for the year shocks from bronco
I have a 2002 honda rancher. Looking to replace the shocks. I found these on Ebay for a pretty reasonable price as opposed to Elka... how have they stood up? would you still recomend?
Are the same lenght the oem shocks, front and rear ?
I dont think so
double edge sword lol stiffer shock just wears out ball joint but on these brutes the firdt thing ya wanna do is the a arm upgrade kit that elimanates the bearings in the a arms n is replaced with a rod and bushings
My back left shock is rubbing my tire after I put a 2” HighLift lift kit on my 2021 750 brute force. I can’t figure out the problem, any suggestions?
add a 1 inch spacer to each side when putting on a lift kit it brings the tires closer in which in turn causes them to rub
Would Kawasaki brute force shocks fit on a Honda?
not sure
Will Yamaha grizzly shocks fit a brute ?
Dont know sorry
Just picked up a bronco shock for my bike. Do you know how to adjust rebound?? With the blue valve??
This shock was 100% trash blew the fuck up in like 100km don't buy these products have the video on my page
@@andtreww what shocks did you use. I can’t find the video on your page?
I went to your website and couldn't find these shocks. I'm looking for replacement shocks for my Suzuki 700 KingQuad. Any suggestions for those who live in Canada where it seems shipping costs close to 100 dollars like a third of the cost of shocks?
Hi Michael - please email us through our website - its hard to put every option on our website - there are millions of parts!
PowerModz will do, thanks!
How do you find those tires even though they are wore a good bit?
I prefer the cryptids
Great video makes me miss my brute
We also call them bikes here in Texas.
I do not want stiffer springs and shocks on my quads. I want softer and better ride
These are 10 percent stiffer, better control and the ability to load more....winches, loads, boats, plows, heavy riders etc etc. A shock can be stiff as heck for a 150 pound rider but soft for a 200 pounder....
I put some Bronco shocks on my '08 Sportsman 500 I like them.
give me an update before I order some for my foreman, are they still good?
Why not a stage 1 or 2 Elka?
NM650XMR EVER READ A FUCKING DESCRIPTION
Aidan Nina ya read it..there a reason your being such an idiot swearing at me..all I asked was why not stage 1 or 2 Elka..EVER READ A FUCKIN COMMENT..
RedneckCrazy4 I was simply asking why he went with the Broncos and not Elka stage 1 or 2..thats it..nothing more..nothing less..just curios as why as I know Louis is a big Elka fan so why the Broncos shocks over the Elkas..was it price? Was it something else..just a simple straight forward question
its an inexpensive high quality alternative to an adjustable high performance shock. for this application these shocks are perfect.
PowerModz right on thanx..look forward to more great mods a vids
Stay away from these, put them in my Brute Force and one of them failed and leaked in two months, no warranty whatsoever. What a rip off.
Save save save for Elka's