How to Replace Front Brakes 2014-2023 Jeep Cherokee

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
This video shows you how to install new, quality TRQ brake pads and rotors on your 2014-2023 Jeep Cherokee. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This repair was done on a 2017 Jeep Cherokee Limited 2.4L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2014 Jeep Cherokee
2015 Jeep Cherokee
2016 Jeep Cherokee
2017 Jeep Cherokee
2018 Jeep Cherokee
2019 Jeep Cherokee
2020 Jeep Cherokee
2021 Jeep Cherokee
2022 Jeep Cherokee
2023 Jeep Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obIg/1A...
• 14mm Socket 1aau.to/ocaY/1A...
• 19mm Socket
• 8mm Socket 1aau.to/obJ2/1A...
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaS/1AX...
• Brake Caliper Hanger 1aau.to/onD/1AX...
• Pliers
• E20 Inverted Torx Socket
• Torque Wrench 1aau.to/obei/1A...
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/obbs/1A...
• Paper Towels 1aau.to/oQi/1AX...
• Safety Glasses
• Silicone Brake Parts Lubricant
• 5mm Hex Wrench
• Floor Jack 1aau.to/oazJ/1A...
• Hammer
• Jack Stands 1aau.to/oamy/1A...
• Wheel Chocks
• Wire Brush 1aau.to/oyz/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Foodie2.1]

I'm scared to bleed the brake fluid alone because I was always told someone needs to be pressing the brakes while the other bleeds the fluid.

[@ConnorKulig]

does this work with 2021 cherokee? I know it says it in the title but I was told I have to reset the computer when I change the breaks is that true??? thank you.

[@davidoslager1613]

Do the caliper bracket bolts need to be replaced? I've read a lot of conflicting information about them. Some say they are one time use (Torque to Yield). Others say no. They look like a traditional bolt but with an E20 head (T55 for the rear brakes)

[@Foodie2.1]

I just took my car in for brake work and they used the cheapest brake pads and rotors. Wagner pads for front and back and 2 new front rotors $750. I always fainted. Pair of Wagner pads $30 at most and rotors $150 at most.
I get brake dust and when I press the brakes the car doesn't want to stop. I brought the back to the shop and still same issues. Never again to the nasty brake shop (Brakes Plus).

[@faridsafazadeh1137]

As you showed here I tried to use E20 socket for removing those bracket bolts but it did not work at all??!! I bought a set of those sockets from Princess Auto when I tried to use E20 the socket even could not sit properly on the bolt!! it could not be flash!! it would just cover 2/3 of the hight of Bolt!! And of course it could not open that bolt. Can you help?

[@TRQ]

+@faridsafazadeh1137 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Bonzi_Buddy]

LULZ. Socket wrench to break torque ... considered a no-no. People do it all the time though. It abuses your tools is all.