Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
What is the type of encoder which used? What's the power electronics board??
Can I have the sample file of this project, sir? That would be great
Hi, I'm busy recently. I can go back check my backups. Will share when find this.
@@jiezhang2722 Thank you, this would mean a lot for my research.
@@jiezhang2722 Thank you, this would mean a lot for my research!
Hi, do you know how can I identify the pin which corresponds to each PWM channel from the DS1104? I do not find any diagram
Hi, sorry I can't remember clearly. Seems that I chose any two of the pins and connect to the motor.
Hi Andres, you can find the pinout it in the dSpace datasheet for the IO board and compare with dspace library block to see which parameters to set for that
hello, i dont know how to creat the duty cycle generation bloc. can you help me with that. thank you very much :)
hello Have you solved this problem
@@KevinDai-vg4rn hye, did you have settle this problem? if yes can i know how?
您好 我想问一下这个dspace的pwm占空比值应该怎么给
按照电机速度
@@jiezhang2722 我用的dspace foc矢量控制电机 但是我不会simulink这个svpwm产生的脉冲信号转换成占空比给dsp_pwm3这个模块 就是您模型中这个Duty Cycle generation模块这个我不会 能教教我吗
@@KevinDai-vg4rn 这个我记不清了。你查查资料。
@@jiezhang2722 好的谢谢 我再找找资料吧
老师您好 这个占空比的问题我解决了 可是我用dspace跟驱动板连接之后 没有任何反应 请问会是什么原因呢 我在淘宝买的电机驱动开发板
博主可以分享一下原模型吗？
几年前的东西了。我找找看。
@@jiezhang2722 非常感谢
@@jiezhang2722 请问有找到吗？我就是不太懂我需要PWM波来驱动我的电机，应该用哪个模块来驱动
What is the type of encoder which used? What's the power electronics board??
Can I have the sample file of this project, sir? That would be great
Hi, I'm busy recently. I can go back check my backups. Will share when find this.
@@jiezhang2722 Thank you, this would mean a lot for my research.
@@jiezhang2722 Thank you, this would mean a lot for my research!
Hi, do you know how can I identify the pin which corresponds to each PWM channel from the DS1104? I do not find any diagram
Hi, sorry I can't remember clearly. Seems that I chose any two of the pins and connect to the motor.
Hi Andres, you can find the pinout it in the dSpace datasheet for the IO board and compare with dspace library block to see which parameters to set for that
hello, i dont know how to creat the duty cycle generation bloc. can you help me with that. thank you very much :)
hello Have you solved this problem
@@KevinDai-vg4rn hye, did you have settle this problem? if yes can i know how?
您好 我想问一下这个dspace的pwm占空比值应该怎么给
按照电机速度
@@jiezhang2722 我用的dspace foc矢量控制电机 但是我不会simulink这个svpwm产生的脉冲信号转换成占空比给dsp_pwm3这个模块 就是您模型中这个Duty Cycle generation模块这个我不会 能教教我吗
@@KevinDai-vg4rn 这个我记不清了。你查查资料。
@@jiezhang2722 好的谢谢 我再找找资料吧
老师您好 这个占空比的问题我解决了 可是我用dspace跟驱动板连接之后 没有任何反应 请问会是什么原因呢 我在淘宝买的电机驱动开发板
博主可以分享一下原模型吗？
几年前的东西了。我找找看。
@@jiezhang2722 非常感谢
@@jiezhang2722 请问有找到吗？我就是不太懂我需要PWM波来驱动我的电机，应该用哪个模块来驱动