You don't need an external board with this charger, I'm not sure why balance leads you have but I can directly plug my lipo packs right into the side of the charger. Just pay mind as to where the negative wire is. Also please note when using the ac power supply if I remember, it's only 50w per channel, and on that big 6s you won't see a 5a charge rate. You can set it, but you will realistically see only about 2.5a.
Remember watts is amps times volts. So to see what rate you can charge a 4a pack, take 50w which is this charger when plugged into the wall, divide it by 14.8 volts. Since input voltage will be more than 14.8, it will be less than the number you get. 50 divided by14.8 is 3.3 and change. Depending on the mah rating, is how long it will take and how far you discharge the pack. 6000mah pack will still take over an hour.
Добрый день!Я не очень понимаю в зарядных устройствах так как только начал свой маленький бизнес по прокату детских электромобилей!Вот подскажите я могу этим зарядным устройством заряжать сразу 4 аккумулятора 12в 7-12ач?или нужно будет докупать отдельно блок?
I have this charger and it works well with small batteries , but when it comes to real size batts, it will take almost two hours to fill a 5000 mAh 4 cell, and is only because 50 watt per channel is a very low number.
How the hell do you turn off the capacity and time cut off? I havebt used my charger in about 12 years and of course i have lost the manual. I figured everything else out (i think) but my capacity cut off is set at 3000 mAh and my time cut off is set at 90 minutes and its very anoying
i am just now learning about this and i bought it years ago. i think the max global output can only be about 200 watts. that explains why when i would charge four 3s lipo at 5amps, not all channels would get 5amps, as that would be (12.8vx4) =50.5, 50.5v x 5amps = 250 watts, hence why some wouldnt charge at that amperage
@@rlane4osu199 i am just now learning about this and i bought it years ago. i think the max global output can only be about 200 watts. that explains why when i would charge four 3s lipo at 5amps, not all channels would get 5amps, as that would be (12.8vx4) =50.5, 50.5v x 5amps = 250 watts, hence why some wouldnt charge at that amperage
You don't need an external board with this charger, I'm not sure why balance leads you have but I can directly plug my lipo packs right into the side of the charger. Just pay mind as to where the negative wire is. Also please note when using the ac power supply if I remember, it's only 50w per channel, and on that big 6s you won't see a 5a charge rate. You can set it, but you will realistically see only about 2.5a.
Howdy, great video, much more informative and to the point than other videos iv'e found today. Keep it up man!
nice, thanks for taking the time to make this.
Remember watts is amps times volts. So to see what rate you can charge a 4a pack, take 50w which is this charger when plugged into the wall, divide it by 14.8 volts. Since input voltage will be more than 14.8, it will be less than the number you get. 50 divided by14.8 is 3.3 and change. Depending on the mah rating, is how long it will take and how far you discharge the pack. 6000mah pack will still take over an hour.
better than the manual! thank you so much!
Thank you for the info, Just one thing you need a mic so we can hear you, but other than that awesome info on the charger
Great video, thank you.
What about those ordinary 9v retangular cells Li-Ion? Works with?! What option on charger must choose for this type of cells?
5a max rate with max input voltage......so depending on how low the pack is, roughly an hour.
I can get one cheap are still worth buying?
Really helpful thanks
i have this charger. i have had a few chips go bad in it over the years, but that could have been my mistake some how
how fast will this charge a 4 cell lipo
Добрый день!Я не очень понимаю в зарядных устройствах так как только начал свой маленький бизнес по прокату детских электромобилей!Вот подскажите я могу этим зарядным устройством заряжать сразу 4 аккумулятора 12в 7-12ач?или нужно будет докупать отдельно блок?
I have this charger and it works well with small batteries , but when it comes to real size batts, it will take almost two hours to fill a 5000 mAh 4 cell, and is only because 50 watt per channel is a very low number.
What do you mean real size? Are the other ones fake sizes?
My fault, sorry, I ment large batteries....
i have one and i'm so satysfating.
Mateusz Kuśmierek I've had mine for 3years now and still works like the day i bought it , great charger !
But this charger have one big problem when i charging four batteries in 3.0A Nimh .later on one year charger get broken and must be repair in service
so how does it charge the 6s at 5amp when you would need 111watt to do so but its only a 50watt channel?
trying to get my head around this stuff
It will charge at 2.25 amps for a 6s lipo battery. 50 watts divided by 22.2 volts = 2.25 amps. therefore it will take a very long time to charge.
works just like my Bantam 6,,, only it does 4 batteries instead of one,,,
How the hell do you turn off the capacity and time cut off? I havebt used my charger in about 12 years and of course i have lost the manual. I figured everything else out (i think) but my capacity cut off is set at 3000 mAh and my time cut off is set at 90 minutes and its very anoying
this may have a 6a max, cant remember, on a 2s you can get 6a so slightly faster than an hour.
i plugged a lipo i had into the charger. it's telling me low voltage. what do i do about that?
Hi Swamprat ! If you send your question to sales@bigboyswithcooltoys.ca the team will be more than happy to help you !
when i set all four chargers at 6amps, it stops and says voltage error. is it defective?
i am just now learning about this and i bought it years ago. i think the max global output can only be about 200 watts. that explains why when i would charge four 3s lipo at 5amps, not all channels would get 5amps, as that would be (12.8vx4) =50.5, 50.5v x 5amps = 250 watts, hence why some wouldnt charge at that amperage
how come when i set my charge rate at 6A it only charges at 4A
It's a limit of wattage. I'm guessing you might be charging a 3s? 50w/11.1v=4.5a.
@@rlane4osu199 i am just now learning about this and i bought it years ago. i think the max global output can only be about 200 watts. that explains why when i would charge four 3s lipo at 5amps, not all channels would get 5amps, as that would be (12.8vx4) =50.5, 50.5v x 5amps = 250 watts, hence why some wouldnt charge at that amperage
looks like 4 imax B6 on a box
What about? AA Batteries