I have to press both in. I think my brake maybe installed backwards or upsidedown. Or maybe youre supposed to push in both. It works really well for me because i can just release the brake a little and tether it to slow down instead of using the wheel arch.
I have a kugoo S1 too! He served me for several months. In January 2020, I called an internet vendor that my engine lamp was on and that the scooter was not working. He has been harassing me for 5 months now, constantly looking for new photos and videos. Today is May 17, 2020. they've been texting me for 5 months. They first claimed to me that he could not send because of the situation in Europe with COVID-19. And mant and falf ago they promise to send. I think I bought trash from a scooter and the factory doesn’t stick to the warranty statement!
Hello! I was driving the scooter with small speed (5km/h) one day and the motor started to trip. Turning on and off when the steering was fully pressed. After the motor did not start at all. No warning button, no error sign. Do you think it may be some overheated motor protection? How to fix this?
water got into my battery area and the battery stopped working, then I got a new battery and it powered on, but no throttle power, when I manually spin the front motor wheel by hand, I noticed the wheel felt bumpy and not smooth when spinning, I then disconnected the wheel power cable and the wheel manually spin smoothly. To fix this I bought a new controller and it works, also to stop water damage from front wheel spinning water into the battery compartment I used silicone sealant around open-wire holes around the battery compartment, now everything is perfect.
#electricscooter Hi I have a Kogoo S1 scooter. Last winter got stuck in a flash flood and the water was up to my knees, I changed the battery and the control unit and the errors are gone from the display now but neither the brake nor the accelerator works and the front wheel seems stuck. Can you help me please what I need to do next? Thanks for your help, do you think I need to buy another controller?
Mine makes cracking sound when I step on it , it moves but very noisy . Can any one help ? I bought A new wheel but it didn’t help .. the cracking sound continued
The problem is the magnet... Into the wire... Check the wire maybe some loosing connecting wire to your scooter.. Ihave same problem but I'll fixed it my own... U can glue stick the wire for protecting water also your monitor just glue stick it the wire in your monitor too. Because if the rain water passed on it on your monitor you will be shutdown..
It amazes me people are buying these, you only have to look through the comments to see they are unreliable, wasting £250 then buying a Xiaomi, just get the better scooter in the first place.
@@justme599 BLDC is a kind of synchronous electric motor. MOSFET is a kind of unipolar (field effect) transistor. For further infomations, visit Wikipedia.
I have to press both in. I think my brake maybe installed backwards or upsidedown. Or maybe youre supposed to push in both. It works really well for me because i can just release the brake a little and tether it to slow down instead of using the wheel arch.
I have a kugoo S1 too! He served me for several months. In January 2020, I called an internet vendor that my engine lamp was on and that the scooter was not working. He has been harassing me for 5 months now, constantly looking for new photos and videos. Today is May 17, 2020. they've been texting me for 5 months. They first claimed to me that he could not send because of the situation in Europe with COVID-19. And mant and falf ago they promise to send. I think I bought trash from a scooter and the factory doesn’t stick to the warranty statement!
Who owned brand 1st Evercross or Kuugo, I have two of the same model med Evercross 🤔
Hello! I was driving the scooter with small speed (5km/h) one day and the motor started to trip. Turning on and off when the steering was fully pressed. After the motor did not start at all. No warning button, no error sign. Do you think it may be some overheated motor protection? How to fix this?
water got into my battery area and the battery stopped working, then I got a new battery and it powered on, but no throttle power, when I manually spin the front motor wheel by hand, I noticed the wheel felt bumpy and not smooth when spinning, I then disconnected the wheel power cable and the wheel manually spin smoothly. To fix this I bought a new controller and it works, also to stop water damage from front wheel spinning water into the battery compartment I used silicone sealant around open-wire holes around the battery compartment, now everything is perfect.
I bought a new control but my throttle power doesn’t word can u help me ?
I have same problem what i need to do?
Idk bro help
#electricscooter Hi I have a Kogoo S1 scooter. Last winter got stuck in a flash flood and the water was up to my knees, I changed the battery and the control unit and the errors are gone from the display now but neither the brake nor the accelerator works and the front wheel seems stuck. Can you help me please what I need to do next? Thanks for your help, do you think I need to buy another controller?
I had the same problem, i just took the brake cable off and returned it, it worked again
Bonjour j ai se problème avec ma trottinette que doivent fair
I got the same problem as well
Idk bro helpppppppp
How can i repair it ?
I got the same problem as well
Me too
Quelle est la solution
U change the wire especially the battery u can fixed it by your own..
Mine makes cracking sound when I step on it , it moves but very noisy . Can any one help ? I bought A new wheel but it didn’t help .. the cracking sound continued
Change scooter controler
The problem is the magnet... Into the wire... Check the wire maybe some loosing connecting wire to your scooter.. Ihave same problem but I'll fixed it my own... U can glue stick the wire for protecting water also your monitor just glue stick it the wire in your monitor too. Because if the rain water passed on it on your monitor you will be shutdown..
What wireee??help bro
You fond the problem? I need help please
Me too
Me too
@@marwanmfn5545 hi i fond the problem change all the computer in the front thats it is broken
@@manoliconstantin4584 hi what do you mean by this?
Mine won’t go on gear 3 but 1 and two work perfect
kick start might be on
Why u think they so cheap
It amazes me people are buying these, you only have to look through the comments to see they are unreliable, wasting £250 then buying a Xiaomi, just get the better scooter in the first place.
I had the same problem but instead of the bottom right corner warning i have upper right can anyone help me?
You have a motor problem try to unplug the motor connector and plug it back
I have the same problem, I want a solution, please
Try to tern it off for 5 to 10 seconds and try and tern it back on again ok
Anyone got a workaround for this? I've the same thing, but, doesn't affect the break. Instead, I can't accelerate
I have my one on guarantee and they just sent me new part so I could fix this problem myself.
Fernandino Mesquita what was the new part?
Filip Jurczynski what was the new part?
@@liamgrindley9154 it was controller. After changing it Scooter stared working again. I checked on AliExpress there are new ones for €22
Filip Jurczynski thanks for the reply. I’ve put a new controller and lcd display the brake is working just no accelerator and that warning light.
BLDC driver is dead. Short circuit on one or more MOSFETs.
Please elaborate sir. What does this mean?
What is BDLC? And MOSFETs
@@justme599 BLDC is a kind of synchronous electric motor. MOSFET is a kind of unipolar (field effect) transistor. For further infomations, visit Wikipedia.
@@jannosek9525 thanks sir, does this happen due to water damage?
@@justme599 probably yes. Or It seems to be a production mistake. For example a cold solder, a solder ball remained on PCB,...
Pior trotinete eletrica que comprei!
I have the same problem, what should I do please help me
Hello Were you able to correct the problem ECU ??
Salam khoya wach 9aditiha?