Glaze kiln opening - sgraffito bee mugs and some glaze tests

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024
  • TOOLS I USE:
    (These links are “paid links” where I earn some commission if you purchase through them below. Thank you for your support!!)
    Packaging supplies:
    🔥Foam roll: amzn.to/3R7Dm8t
    🔥Paper roll: amzn.to/3Nc2IAK
    🔥Tape dispenser: amzn.to/3N7zmUg
    🔥Tape refills: amzn.to/3N6goNF
    🔥 Thank you cards: amzn.to/3uElTgl
    🙏🏻 Christian stickers: amzn.to/3GrAePT
    🔥 Fragile stickers: amzn.to/482QIcP
    Miscellaneous:
    🔥 Pottery wheel I used for my first two years: amzn.to/44s3h0C
    🔥 New VEVOR pottery wheel: amzn.to/3QrxyaG
    🔥Ring light/tripod: amzn.to/42b7Eel
    🔥overhead camera mount: amzn.to/3R5uZeX
    🔥light for overhead camera mount: amzn.to/3uhthOp
    🔥Food scale: amzn.to/3Nsld54
    🔥Wire tool: amzn.to/41Wwcbl
    🔥 Hydrometer: amzn.to/3AJgynW
    🔥 high fire stilt pins: amzn.to/3YybGwT
    🔥 pottery project log book amzn.to/47ubFhl
    🔥 Claypron: amzn.to/46wNwpn
    🔥 Dremmel tool: amzn.to/3uhW6dH
    🔥 Roll of foam for mailing: amzn.to/47gF6D7
    🔥 sales tracking book: amzn.to/3umbQMM
    Throwing tools:
    🔥Sponges: amzn.to/3AM1rK4
    🔥Sponges generic: amzn.to/3HpdMHS
    🔥Needle tool: amzn.to/3VnX6X5
    🔥Shammy cloth: amzn.to/3PZqbaw
    🔥Xiem foot maker: amzn.to/41UeZzs
    🔥Metal kidney: amzn.to/3VqQIi0
    🔥 Soft red rib: amzn.to/3oXhbHP
    Slip casting tools:
    🔥mold rubber bands: amzn.to/48IXtlm
    Handle making tools:
    🔥 Handheld Extruder: www.amazon.com...
    🔥 Xiem knife tool: amzn.to/3nl8CpF
    Trimming tools:
    🔥 Xiem large trimmer TFT06: amzn.to/3LiRQzC
    🔥 Xiem small trimmer TFT07: amzn.to/3LH7SV5
    🔥 Custom maker stamp: amzn.to/41RVBTt
    Designing tools:
    🔥 V tip carver: this is not on Amazon. You can find it through most ceramic suppliers. It is Crown Pointe brand.
    🔥 wire stylus tool for sgraffito: amzn.to/3QDRes1
    🔥double sided needle tool - set: amzn.to/3MtqqbY
    🔥 Kemper ball stylus tool: amzn.to/3OhZqgO
    🔥 Banding wheel (not my exact wheel but similar): amzn.to/42Wx8g0
    🔥Xiem Slip Trailing Applicator: amzn.to/3qvrrHL
    🔥pin Vise Hand Drill: amzn.to/3Jvj7Pg
    🔥Diamond Bits for Carving: amzn.to/3qROhcU
    🔥Pottery Compass: amzn.to/3PVua7P
    🔥 18 gauge blunt tip applicators amzn.to/4570qKe
    🔥 blank ink pad for maker stamp amzn.to/3s8uPtc
    🔥 glaze applicator bottles amzn.to/3OTqfry
    🔥blunt needs covers amzn.to/47xkyqL
    🔥pinstripe tape amzn.to/3KCyGox
    🔥silicone alphabet mold amzn.to/3KHumV9
    🔥small letter/number stamps amzn.to/3YzmieI
    🔥high temp wire U shape amzn.to/3qpSPYj
    🔥 10” plate drape mold amzn.to/3DQSDnU
    🔥 8” plate drape mold amzn.to/3QDEjXG
    🔥 Cookie Cutter Set amzn.to/3LeWZcq
    🔥 Sweater texture mold amzn.to/3Z9Y6js
    🔥 sweater textures and BUTTONS mold amzn.to/484DSMe
    🔥New button mold: amzn.to/47jdHAC
    🔥 Knitting texture mold for handle amzn.to/3Pinq2u
    🔥 Grinch cookie cutters: amzn.to/409o732
    Refining/prep tools:
    🔥 Diamond sanding pad: amzn.to/3AGxLy5
    🔥 Electric skillet: amzn.to/3oYSJpe
    🔥 Wax: amzn.to/44trW51
    Glazing:
    🔥 Sax underglaze in black: amzn.to/3Li2xlT
    🔥 Speedball underglaze class pack: amzn.to/3Q2tEDU
    🔥 Small squeeze bottles: amzn.to/3nagwCp
    🔥 Ceramic supply wax resist: amzn.to/3AGtvPb
    🔥 Drill mixer attachment: amzn.to/41RFhlA
    🔥 Mother of pearl luster: amzn.to/46FD8vV
    🔥 bright yellow gold luster: amzn.to/499iSnW
    🔥 white gold luster: amzn.to/3s3uvw2
    🔥 essence for lusters: amzn.to/3MefiiO
    *Disclaimer: Aubrey Morel is a participant in the Amazon Services LLC Associates Program which is affiliate program designed to provide means for sites to earn advertising fees by advertising and linking products to www.Amazon.com. As an Amazon Associate I earn from qualifying purchases.
    ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
    You can help support my small business through the link below. Thank you so much for watching and supporting me!
    www.amazon.com...

Комментарии • 16

  • @mindygeist7157
    @mindygeist7157 7 месяцев назад

    Thanks so much for showing your work and glaze combinations! I’ve used ink spots before but was fired at a cone 10 and it looks pretty different(probably a clay body difference also),it’s so fun to see the differences in the reactions. Much appreciated, I hope your day was super!☕️🍩

  • @Ellen.s.atelier
    @Ellen.s.atelier 7 месяцев назад

    Looks amazing again! Thanks for rambling, Goes Well with my first coffee before I go get muddy!

  • @cyndien5011
    @cyndien5011 7 месяцев назад

    Beautiful

  • @cpnotill9264
    @cpnotill9264 7 месяцев назад

    The indigo rain is beautiful when the crystals melt. 😁 Your bee mugs are beautiful and I have some mugs with green tea over black walnut waiting to be fired. You sure have your plate full with shows, family and full time job! Not sure how you do it.....👍

    • @moreldesigns2674
      @moreldesigns2674  7 месяцев назад +1

      Me either lol. Lots of 2am work sessions, then day job 8-5 lol. It’s ok. I enjoy it all.

    • @cpnotill9264
      @cpnotill9264 7 месяцев назад

      @@moreldesigns2674 Great to hear you're enjoying it all! Take care of yourself too. 😂

  • @patspotpage
    @patspotpage 7 месяцев назад

    Hi Audrey! I like the winter wood over rose quarts! I don't know if you used cones, but some of those testers look like maybe the kiln didn't get hot enough. I agree on the walnut! And leather too. The face mugs are super cute! I'm looking forward to seeing them. I love your bee and fox mugs. Thanks for sharing!

    • @moreldesigns2674
      @moreldesigns2674  7 месяцев назад

      Thank you! I normally do use cones but couldn’t fit them in this time. I think you might be right. I’m waiting on new elements so hopefully the next firing will have those.

  • @micheledickey4066
    @micheledickey4066 7 месяцев назад

    My gosh your pots are amazing. Have you thought of doing an in depth video on your scrafitto? I think it would be a huge hit!! I think most of the pots that didn’t turn out like you wanted was because the kiln didn’t get hot enough. The one mug you showed the inspiration for was fired to cone 7. Also there is an Albany slip and an Albany slip brown so make sure you got the right one. It was annoying for me to find that out because I ended up getting the wrong one.

    • @moreldesigns2674
      @moreldesigns2674  7 месяцев назад +1

      Ohhhh I might should check that lol! And I didn’t use cones this time, I normally do but couldn’t fit them in. So I think it did fire to a cone 5 instead of 5.5. I have done a couple videos on sgraffito but I can definitely do a more in depth one. ❤️

    • @micheledickey4066
      @micheledickey4066 7 месяцев назад

      @@moreldesigns2674 Yeah that really threw me off when I found out there were 2!

  • @nadinee3590
    @nadinee3590 7 месяцев назад

    Hi! I love your work and appreciate you sharing your glaze combos! 💗I wanted to let you know that Albany slip brown looks grey and white when over just obsidian. I think your chip & dip bowl had Smokey merlot over your Albany slip brown. I do the combo that you tried and it is obsidian like you had, but the ASB and the Smokey merlot on top of it do not cover each other. 👍
    Thanks again for your videos! I really enjoy them :-)

    • @moreldesigns2674
      @moreldesigns2674  7 месяцев назад +1

      Ohhhh! Sounds like I did it wrong. I’ll try again! Thanks for the tip ❤️

  • @Mel-dl4rp
    @Mel-dl4rp 7 месяцев назад

    Love the bee mugs. How did you get the black to be so smooth and satin looking? My black underglaze looks chalky.

    • @moreldesigns2674
      @moreldesigns2674  7 месяцев назад

      I believe it’s the brand I use. Sax True Flow in Jet Black. There is a link to it in the video description. I’ve tried other underglazes and none turn out like this. And I fire to cone 5.5