Glad you all like it :) it's not very hard at all as you can see, drilling the holes are quite simple too, specially if you got access to an upright drill, I just use a normal electric drill so it's alittle more tricky to get it perfect everytime! My Canon needed charging so I used my iPhone instead! :)
@iZilly could I use a regular wood glue or do you highly recommend the one your using for the graphic. (I don't make my own boards so I just want to do my own graphics)
@NXTfreak528 i sure you can :) just make sure that it is ok to use on wood.. and give it VERY thin layers.. you might not even see the first 2 layers get shiny but thats ok.. you must NOT soak the deck in clearcoat.. give it 2-4 thin layers, with 20-30 minutes in between, then let it dry completely... about 12 hours... then lightly sand it to clear away any dents or bubbles with very fine sandpaper, clean it and then give it 2-3 more coats and let it dry and then your done.. :)
If you don´t clearcoat it, the paper will be worn off very fast, but give it between 3-5 layers of clearcoat, very thin and it should last you quite long :)
Oh my god that is amazing i would absolutely LOVE a board like that you are so amazing.ps I know everyone asks and I bet you get annoyed after a while but if there are any boards you are going to throw away please message me and I will have them and definitely have a go at make one. Thanks
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
thats and awesome idea. nice thinking
try painting a clear paint glaze over the top of the paper to keep the paper toghether and prezerve it
That's a real smart way of putting it on + I love your videos!!! :)
Glad you all like it :) it's not very hard at all as you can see, drilling the holes are quite simple too, specially if you got access to an upright drill, I just use a normal electric drill so it's alittle more tricky to get it perfect everytime! My Canon needed charging so I used my iPhone instead! :)
Thank you so much this really helped me making my own brand
thanks for the vid! love it so simple! still comes down to the time and care you put into them i see. 👌 good work.
this is awesome bro i have my own boards now, subscribed!!
carlos nowell can u make me Fingerboard
when did you let the glue dry? before sanding? or before the "stomach" press? and roughly how long would it take for the glue to dry?
that cool, that way leaves the most perfect shape and is not crumbling at the edges
@iZilly could I use a regular wood glue or do you highly recommend the one your using for the graphic. (I don't make my own boards so I just want to do my own graphics)
yo. you are sick. this was sick. that graphic is sick.
AMAZING. I love your videos man !
Holy S**** This was amazing the best tutorial i luv it, thanx so much! :D
That is a really smart way to make graphics for a fingerboard.
Ooh... You are a scientist!
I'm going to try that great video by the way
hey izilly sick video iv made graphic so rad thanks for the tips :)
that was awesome!!!!!
awesome tutorial. I'm trying it with my company now. thanks dude
great tutorial. that is a good idea
AWSOME BRO!!! THNX 4 SHARIN!!!
Wow! Thats amaizng!
great how to man keep up the good work
That vid really helped
True inspiration, thank you Izilly, keep it up :)
Thank you. It really helped. I really like you vids. :) keep up the good work. izilly
Sweeeeet! Nice vid! Subscribed!
you got my subscription mate! thanks for sharing your secrets with us!
you can use any program :) Paint, Gimp, or draw something on paper by hand, it´s all up to you :)
Been subbed since this video!
I wont that deck that wass awesome!! izilly your so good at this!!
That makes you even more Awesome and Epic :D
Thabks so much iZilly ill try that thats a good idea do you also know how to make wooden boards
good video keep doin what u doin
that was really good you should make a video of how to make a paper techdeck and one out of wood
loved this! thanks! i have a company called yc decks and im going to start putting my graphics on like this :) thanks alot izilly!
WOW looks so easy!!!!!!!
You my sir are a freaking genius
awesomw way to add a graphic. mine lasted me a long time:)
Great tutorial!! I use the stomach method too :3
wow that is a really good idea thanks
that is actually really awesome
@NXTfreak528 i sure you can :) just make sure that it is ok to use on wood.. and give it VERY thin layers.. you might not even see the first 2 layers get shiny but thats ok.. you must NOT soak the deck in clearcoat.. give it 2-4 thin layers, with 20-30 minutes in between, then let it dry completely... about 12 hours... then lightly sand it to clear away any dents or bubbles with very fine sandpaper, clean it and then give it 2-3 more coats and let it dry and then your done.. :)
Just did it and it works amazing thanks man
you are really good at making fingerboards i am barely going to attempt how to make my first one so could u give me some pointers?
oh my god.... This graphic is beast!
You are epic.
your fan from the Polish.
Would Elmers glue or nail polish work for the clear coat over it please reply thx
Nail polish but not glue
i was wondering too
If you don´t clearcoat it, the paper will be worn off very fast, but give it between 3-5 layers of clearcoat, very thin and it should last you quite long :)
Cool... But, what kind of the glue? Wooden glue or paper glue?
that was freaking cool!
Man I make that and graphic look awsome TNX!! :D
@erik fingerboard
Yes, you can but sometimes tge thickness of the old graphic might kind of push the paper off and take over the glue.
you are cool dude ilove this guy helps me lots :) tnx
awesome dude !!!!!
You're the man that was helpful thanks.
How do u cut the board with scissors or saw if scissors do u cut according to the line or leave excess wood?
i have a tip! you also can put veneer into a printer!
Photoshop but i think that you can get a program names Gimp which properly also is made for Mac but i am not sure? :)
This is so sick I'm gonna have a try :D
@iZilly Can you use a spray can of clear gloss from like walmart?
AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
awesome dude
hi i was wondering if u could do some vidioes on finger boarding as im not very good at it
nicework how much for you to do them 4 me answer plz im huge fan bcz of you im starting my first finger board club
Thanks for the tutorial it worked great :D
I found that putting packaging tape over the graphic makes it look better and last longer.
thanks bro...its really cool
Damn! I did nice Graphic to my deck! thanks!
Can u do a video on all the fingerboards you have?
going to use this on all my boareds going to make a mold tomorrow
dude you are an idol for me but one problem i can not make as smoothe sweet decks as you you can fingerboard like mad!!!!!!!
Thank you so much, I am frustated when I trying to make a graphic using heat transfer paper . Now I'll try it with your example
nice im going to try this. is it called clear "code"or clear "coat" ???
Dude thatnis the best way to put on graphics and i see heaps of people do that technique
the best how to ever!
this is awsome!!
this works great
thanks for the vid izilly
thats so amazing simple thanks alot!!!!!
Love your vids
izilly you're the BEST!!!!!!!!!!
instead of clear coat could you use clear nail varnish?
I can't make finger boards myself but I buy plain ones that are complete but no graphics on it and I just use them to add my own custom graphics
RHN Gaming i make boards but fail at graphics lol
RHN I am about to do that. I done an older one with paper and drew my own design with pens. Turned out sweet
Oh my god that is amazing i would absolutely LOVE a board like that you are so amazing.ps I know everyone asks and I bet you get annoyed after a while but if there are any boards you are going to throw away please message me and I will have them and definitely have a go at make one. Thanks
i use clear coat.. it´s from a spraycan.. make sure it´s for wood! its a vanish
Nice it looks so easy but I wany to learn how to make my own decks with a mold I havent even triwd that yet
u are AMAZILLY lol this is sweet!!!
i love it it work perfecli
Dude ur awesome :)
I think you have to put some tape, large tape i think, so the board graphic does not scratch, and the graphic will be more durable..
Sooooo cool
after spraying it with clear coat,is it safe to grind with???
I am a very big fan!!!!!👲💖💚💛❤💜👣👏💵💵💶💶💶
good videos iZilly
thanks izilly now i finally made my own deck and il show you a picture ones
how to make deck without veneer? what wood can i use to replace the veneer?
Thanks for this totorial
Can you do a video how to counter sink the holes on top
you look like a cool guy from skyrim :D
where can you find those cool pictures?