Stick Commands iNav OSD
HTML-код
- Опубликовано: 28 авг 2024
- Stick commands iNav OSD - How to use the iNav setup menu via On Screen Display and Save Settings using iNav stick commands. Taranis Q X7, Matek F405 Wing board.
Matek F405 Wing FCB - bit.ly/2SI3bAv
Taranis Q X7 - bit.ly/2S4KyWx
SUBSCRIBE & CLICK 🛎
bit.ly/ANsubscribe
🎥 Video Recording Gear 🎤
Flying
Onboard camera Mobius C2 - bit.ly/2RLNLLg
Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
External Microphone - bit.ly/2S4VDqx
Studio
Wide view workbench camera - SJCAM M20 Action camera 1080P 30fps - bit.ly/2Wh5l8w
Close up workbench camera - Panasonic Lumix LX10 1080 30fps
Audio recording - Rode smartLav+ mic connected to iPhone - www.jbhifi.com...
Video Editing in Final Cut Pro X on 27" iMac
All the Action cameras I have reviewed - newtonairlines....
🔎 More information 🔍
Newton Airlines Uncut - / @newtonairlinesuncut
Newton Airlines blog - newtonairlines....
Andrew Newton RUclips - / @andrewnewton
My portal - anewton.net
What HD cameras do I use - newtonairlines....
What FPV cameras do I use - newtonairlines....
What FPV gear do I use - newtonairlines...
Depron Armin Wing build - • Depron wing build
👌🏽Affiliate links 👌🏽
BANGGOOD RC - bit.ly/2R7LMgg
BANGGOOD Website - bit.ly/2OYahv4
⚠️ Disclaimer ⚠️
Some products reviewed on this channel are provided free of charge by the supplier. Some links in this description are affiliate links. If you use these links to make a purchase I may receive a commission, which helps to fund this channel, at no extra cost to you.
👀 Use your common sense, watch other reviews and shop around before making any purchase.
#AndrewNewton #iNav #stickcommands #scratchbuild #RC #plane #airplane #slopesoarer #glider #underwater #review #depron #foamboard #hotwire #airfoil
Great information Andrew. With the new OpenTX radios, it's now possible to put these stick commands on a switch, using the "Special Functions" utility to (momentarily) override the channels.
In the Receiver menu in iNav, I change the RC Expo and Manual RC Expo to .30. Then use the transmitter to change expo settings. Much easier in the field. Also in Nav plane setup I change rates to 100. Again use transmitter to change rates in the field. I use iNav with F4 v2 fc on all my gliders and wings. All the best...
Great trick Andrew, love it. Thanks for explaining! Used it all the time now.
It's a useful tip indeed
Why could I not enter the menu. You have the answer in your video. Thank you so much! Problem - S800 wing no yaw channel!
I've been pulling my hair!
Ah yes, you are not alone. Glad it works now. Having a kill switch is the other gotcha
great vid!!! But i cannot enter osd menu... I have a matek 411 wing with 2.5.0 inav. is it not supported in this version??
Always Have great info.
That was great, thanks.
Where are the good old Times, where You just need a 4 Chanel TX and RX, a nice Modell, and a Charger, to have an Delightfull Afternoon.👍🏻🤔
Most of the time I prefer the old ways. Just cruising around watching the magic of lift
@@AndrewNewton 👏🏻👏🏻👏🏻👍🏻
Hi Andrew! Thanks for this video! Any suggestions to why I can't enable stick commands? I'm running latest INAV version, Arm on one switch. Sticks calibrated (1000, 1500 and 2000). Thr. a bit larger range as in your video. FC is Mateksys F772-se, Latest OpenTx on Horus X10 with TBS crossfire (also latest FW). Telemetry enabled. I have read the INAV Wiki, but found no clue.
Any suggestions to what might be the problem will be much apprechiated.
It would be very handy to be able to calibrate the compass using stick commands, leaving the computer and USB cabling behind. And getting access to the other stick commands as well would be nice.
Cheers, Torgeir!
Rudder input? No kill switch? Watch your Horus channels display to make sure the outputs are correct to call up stick commands
@@AndrewNewton Thank you for yor reply. No kill-switch, just Arm/Disarm. Ch1-ch4 all moove nicely in the INAV radio window. All calibrated between 1000 - 2000. Only Thr. 998 - 2003. I also experience that the RunCam OSD stick command window is also not available. I have VTX comtroll on UART6, which let me control VTX settings via LUA script. RunCam on Ch4 and all set to correct settings in INAV (for the respective UART settings). I'm not sure if the problem has anything to do with the TBS Crossfire.
If you should thinng of anything else, I'm listening :)
Beyon that - your RC channel on youtube is much apprechiated.
Stay clear from Corona viruses, and fly safe :)
Best regards, Torgeir
@@AndrewNewton My fault! I had combined arm and thr. kill switch on the same switch. In addition to one separate thr. lock.
So now I get the basic INAV OSD (e.g. for adjusting VTX and more), but I'm not able to access the INAV stick commands for e.g. calibrating the magnetometer. Might be prohibited by the fact that I have configured arm/disarm on a switch. Is your understanding as well that utilizing arming/disarming on a dedicated switch prohibits the INAV stick commands for calibrating compass? Any thoughts?
Cheers! Torgeir
Awesome video mate! I can enter and control the OSD menu with no dramas but is there a way to do this without moving the flight controls? As i enter the menu my rudder is obviously going full left as i enter the menu. The servos dont always appreciate this so i was wondering if theres another way to disarm control surfaces upon entering OSD menu. Thanks!
Someone has set up a switch to bring up the OSD menu. Will have to find the post
I can't get in to that menu at all with inav why is that
Hello Andrew I doing some ground test for the manual mode in order to configure all the servos.
If I start moving around the stick the servos suddenly stop in that movement and I could not get back in manual mode.
Then I reboot and I got my manual mode back.
The plane is not armed because I m in my house with no Sats.
Do you think this happened because I got in the osd menu?
In the reviver page I got movement but the servos stops
Could be, hard to know
Hi. Do you know if the save settings work when using a caddx vista or air unit? Thanks
Stick commands work but cant see them on the DJI OSD
@@AndrewNewton thanks, thought it was working as I heard a bleep when I put the sticks in the save position
How do we adjust the all important Board Pitch Angle...?....I can't seem to find it in the Menu anywhere?
Trimm Acc Backwards - Tip 7 newtonairlines.blogspot.com/2019/07/collection-of-inav-tips.html
How to setup stick command in inav. Mine Stick Commands is not working.
Nothing to set up in iNav, it's all in how you setup your transmitter. Watch the video
@@AndrewNewton I got it Thank you.
Nice job Andrew...What about us Mode 1 Pilots..?
sseug I ni dna nwod skcitS
@@AndrewNewton There are more of us than you think....
When I try to put in the stick command, I can't set it up because it alerts me that the throttle isn't down, even though I haven't put in the arm switch. I don't know how I can put in the stick command.
Re calibrate the transmitter sticks, then re calibrate the ESC
Thanks.
Do i need to calibrate the ESC on DSHOT as well? It's strange that I get an alert when I don't operate the arm and just lift the throttle stick...
I changed the OSD position here and there then press " save " but didn't change anything on the Display, it still shows the old style OSD ! any suggestion ? THX!
It should work like that. Which board? Correct firmware? Try again.
@@AndrewNewton Oh, my mistake shouldn't turn on the TX !
How to configure the camera through the flight controller matek 405 wing/ctr on iNav?
I have not done it that way. Better to use the camera keypad setup
This is my first flying wing build and having trouble getting any help but my setup is f405 wing,r xsr recevier, radiomaster tx 16s and inav 2.5. I flashed my board with inav 2.5 and flashed r xsr with latest firmware.i wired r xsr according to matek 5v,ground green wire sbs and yellow t2, it binds quickly when power up with usb with green and blue light. Ive done calabrations, set serial rx in uart2,and enabled sbus. Problem is no stick inputs in recevier port in inav, radio shows stick inputs on monitor in inputs,mixer and outputs.Im lost at this point I reflashed inav,checked wiring have tryed to get advise last 3 days on youtube but i guess they cant or wont help no response. I do notice on inav main page it show configurator 2.5 and under that says 2.4. Is this normal? What else can i try? Thanks
Make sure you are not mixing up SBUS and S-Port on the receiver. Try just connecting SBUS first. Make sure the receiver has ACCST firmware that is the same as the protocol you chose on the TX16s and is successfully bound. There are 2 version of ACCST. If the Rx is on ACCESS then it wont work. More basic tips here newtonairlines.blogspot.com/search/label/iNav%20Basics
@@AndrewNewton Thanks for reply and advice, binding must be fine radiomaster shows r xsr in telemetery menu and showing 5 bar signal on main screen, according to diagram green wire on r xsr is sbus out which connects to sbs on f405 ive unpluged yellow wire. Only thing in radio output menu when moving sticks only input is arrows moveing left or right no value in percentage. Is this normal? Thanks for info.
@@egtreadway4232 Not sure what you're talking about. Can you share photos somehow? Send to my email if you want. Look in the About page on a computer
@@AndrewNewton do you mean send picture of radio stick inputs or r xsr wiring not sure but will try and send some pitchers, I might not explained very well, on radiomaster i go to modell then to inputs, mixer and outputs. While moving sticks it shows stick inputs in input tab and mixer tab the sliders move with sticks showing percentage of movement when output selected while moving sticks arrows move right or left no sliders showing percentage of stick movement. I hope this makes sense because i do need help to get this fixed. I have studyed inav wiki for last 2 months but cant find solution there, please advise on next step. Thanks