DIY Rollbender Roller Bending Radius Bender
HTML-код
- Опубликовано: 23 июн 2021
- Plans: https: www.etsy.com/de/listing/10280...
Plans to my other projects
madebythemetalist.etsy.com
As always, I had an idea and then just started building. Another attachment for my welding table. On this white it is also very space-saving.
Of course, I could have built the rollers in such a way that they can be easily changed, that you can also bend profiles with different discs. You could also change afterwards.
But I wanted something simple and fast to bend something around.
I also need this machine for my next projects.
FEIN Grinders:
fein.com/en_us/tools/grinding...
FEIN Drill/Drivers:
fein.com/en_us/tools/drilling...
Rehm Welding Machines:
www.rehm-online.de/en/
Thanks for watching
hope you get inpiered
take care
Dirk - Развлечения
Wenn ich mir Deine Arbeiten ansehe, finde ich immer 1%, welches ich zu Deinen 100% Prozent addieren kann. Perfekte Arbeit 101%!!!
Dankeschön sowas freut mich immer
My two favorite companies Rehm and Fein. Regards Luke
👍💪
I love that on your edits, the cuts are always between the tap directions. Satisfying!
Thank you 😊
Pancene andalan sampean kangmas... ora rugi kawit mbiyen sabskrep cenel iki. Maturnuwun yo.
I didn`t know about this wicked smart guy, now i`m glad i`ve found him. Subscribed!
Thank you 😁 💪
Your metalworking and your visual storytelling are both absolutely wonderful!
Thank you 😁
Nice green. And your table system is fookin genius.
Thank you 💪😊
Hi Dirk, Respekt!!! Hammer Teil!
Viele Grüße aus Ostfriesland 🤩
Hi Jörg, vielen Dank.
Grüße zurück 😁
Great design and very well executed. I will be your next customer :) Thanks for the link.
😁💪
Wow this is good 👍 👏 experience.
Thank you 😊
Wohooo, endlich ein neues Video vom einzigartigen GermanMetalGuru.. Jedes mal eine visuelle, handwerklich meisterhafte und inspirierende Wohltat. Danke dafür, Dirk! - Äh.. Eine Drehbank! Er hat eine Drehbank! ENDLICH!!! Hat irgendwie gefehlt bisher. Bin restlos beghostert.. - Weiter so! Freue mich schon auf deinen nächsten Streich.. Beste Grüße!
Dankeschön 😁 bei der Ansage werde ich noch ganz rot 😅 die Drehbank seht eigentlich ein paar Meter weiter bei meinem Nachbar...will aber demnächst ne eigene 😁💪
...... another mind-blown solution. 👍👍😎👍👍
Thank you 😁
Your brain and handy work are admirable. (Is / are? "is" sounds better, but I know "are" is correct. Either way, wow.)
Eine genoß dies anschauen zu dürfen. Dies ist richtige Profi-Arbeit. Es sieht einfach aus und werde auch mal einen Versuch machen.. Ob mir das auch so gelingt?? Ich benötige solch einen Bender und neu kaufen ist zu einfach. Es selbst versuchen ist eine Herausforderung. Vielen Dank für dieses schönes lehrsames Video. Gruß aus Holland, Marcel Knippers.
Gerne 😁👍
Grüße zurück nach Holland
Brilliant! Appreciate you saving us viewers time with your editing, very well done.
Love the naration and the dementions were so very clear. I'm gonna' build one right now.
Nice design, clean and precise work, best editing and thank you for let us listing to the work work shop not some other kind of noise. Good work
Love your bandsaw table,good idea
Thank you 😁
Cool build
Thank you 😁
that mountng table is genius
That is another awesome build and excellent video editing, thank you for taking time to film and post this video!
Thank you 😁 you are welcome 💪
Einfach nur hammer hammer geil, vielen Dank Dirk fürs Zeigen, bin hin und weg :-)
Your metalwork videos are the best on RUclips, straight to the point, and the best thing of all no bullshit talking that you have to fast forward through🤙 plus your metalwork is awesome. I'm subscribing👍
Nice design and execution
Thank you 😁
Excellent work as always! Having it mount to your bench like that for adjustable roller spacing is brilliant!
Thank you 😁
SUPERB
I LOVE IT.
Very good model. Ingenious. Great job.
Excellent work. This is a professional work from a professional, thank you
This is so perfectly entertaining, to the point, and mesmerizing
Thank you 😁
Awesome design and great functionality..👍🏽🇺🇸👍🏽
Good idea! Enjoying watching here! Full support here!
Thank you 😁
I love that hammer man :D
Thank you 😁
Pretty cool
brilliant stuff
man, the stuff you could build with a lathe!
Another fine addition to the table accessories 👍🏼👍🏼
That table is bad ass
Thats a badass tool to make my guy. Good shit
worth watching just to see the iron fist !
Nice roller bender. We shared this video on our homemade tools forum this week :)
14:47 that was actually incredibly smart
YAY MIG WELD
good idea
Pretty cool 😎 would love a welding table like that
as you’ve shown you can mount pretty much anything to it 👍
Thank you 😁
Very nice. Nice hammer. Thank you for the video and your time
You are welcome 💪😁
Nice rollbender roller.
Нужная вещичка получилась👍👍👍
It's a great idea.
Thank you
Great skills as always, Getting colourful to. All the best D
Thank you 😁
Great build!
Sehr schönes Ding, so langsam mußt du nicht nur Pläne, sondern auch fertige Produkte verkaufen, ich komme ja kaum noch nach :)
Dankeschön 💪😅 ich schau mal ob ich es einrichten kann 😅
Love watching your work
Thanks for another epic build video. so many cool tricks. luv ya home made Linisher 💯
Vc é fera, suas ferramentas são top demais.
I liked when you bolted the rollers to the table. It got me thinking that by bolting them closer, you could make smaller circles with the same equipment.
Parabéns pela calandra, muito bem feita!
Fantastic.
Like your work.
You have a lot of cool ideas I like your channel, you do good work.
Thank you 😁
nice one
Another amazing build!! Awesome job!
Thank you 😁
I like your creativity, inspirational.
I am always like "how does any of this even make sense?" And at the end im always in awe.
Thank you for some nice words 😁
I'm the same exact way haha I love it!
Awesome 😍😍😍
you little bastard genius, love it
Off the hook , very talented
SUPER JOB !!! 👍👍👍
Regards Paweł P. ;)
You're good! You create some cool stuff. You have the mind of a metalist!
😅 Thank you 😁
Good
Very cool idea. Thanks.
Awesome build! Of course, it was your hammer that took the show. I’m dubbing it “The Iron Fist of Fabrication”. 😆
Thank you 😁😅🤜
That’s awesome really amazing 👍
Thank you 😁
EXCELLENT
love the geometry of every item in this vid bro !
Thank you 😁
That’s a hell of an idea. Great video. Keep up the good work
Thank you 😁
Magnífico trabajo , clase magistral de mecanizado , soldadura , pintura , un color muy peculiar , estaría de oferta , una curvadora espectacular , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
Thank you 😁
Love the design 👍🏻
Super!!!!!!!!!!! Очень интересно и познавательно. Спасибо за хорошие видео.
Impressive as always
Nice hammer
Thank you 😊
excelente felicidades desde cali - colombia
Exactly what I was looking for, many thanks 😎👍
You are welcome 😁
Desde MEXICO.!!!
Extupenda curvadora .
Felicidades .
Thank you 😁
Loving your work cowboy.
Ótima ideia parabéns🇧🇷
When i seen your video about your "Dream Welding Table" - I watched it. And thought "Dream table? PFFFFFFTTTTTT". I didnt see the versatility in it until i watch another video several weeks later. Of you building your tooling to fit in the threaded hole of the table. I LOVE this design! I do have one question. How do keep from dinging your threads in the table? I mean when inserting the bench clamps?
Amazing video.. it would be nice if 4 rolls were made to minimize wasted material
very cool build!
Thank you 😁
Good ideal nice invention thank for sharing, many time see your video.
Amazing project and great vid buddy ❤
Thank you 😁
Excellent video bro and excellent job on the project.
Thank you 😁
that hammer is freakin awesome!!!
Brilliant !
Thank you ☺
Excelência em tudo parabéns 👏
Thank you 😊
@@TheMetalist um ótimo dia com muita saúde e muita paz 🙏
I made a ring roller free standing and I like yours and I suggest you make you two rollers into one but adjust your rollers closer or wider and you really don’t need pillow block bearings for 2 rollers just your idle bearings. Just a thought!
Excellent as always. You just need to line it up with a window for longer lengths! For someone so clever you seem to have a lot of time on your hands to make these things.
Thank you 😁 Yes i try to do one good Video in a month 😅
@@TheMetalist Well you certainly do do a good job of making the video as well as the piece you’re making. I had seen the thumbnail for a couple of days and passed it by until I saw it was from you The Metalist. Always worth watching this I thought.👍
😁😁😁 thank again
Bardzo dobra robota :) 👌
Very nice!
@the metalist
Love your design. I've been subscribed for awhile and your work is great. Request. could you attach an estimate on the materials used not including tools obviously, but bearings, all thread, etc.?
Also, what taps are you using?
Genius!