Я Айфоны не ремонтирую, да и вообще не занимаюсь ремонтом телефонов, но Ваше видео посмотрел полностью! Уж очень качественный контент (чёткость видео и приятная музыка)! Спасибо!
Hey I have a quick question, once you've assembled the iPhone back together and turn it on did you get the Error messages about the battery and the screen?
Das Video hat mir sehr gut geholfen. Ich habe erste mal überhaupt mit Iphone beschäftigt, aber ab jetzt würde ich weiter machen. Vielen Dank weiter soooooo.
Followed this guide to fix my battery thank you ! Now I have no working microphone during calls nor bottom speaker working any ideas ? Took everything apart and made sure everything was plugged in and still nothing
@@nixonscherbarth1974 is that the cable that’s glued to the frame of the phone . Was gonna he new housing with pre installed items . Must have damage something other than the battery when trying to pick out the back glass 🤦♂️
Absolutely "spot-on" video.... Only thing that could have been better is if had been done a little more slowly.. I had to open and replace the main microphone board in my friend's phone and this was "EXCELLENT" thank you very much ;-)
You probably dont care but does anybody know a trick to log back into an Instagram account..? I was stupid forgot the account password. I would love any tips you can offer me.
@Izaiah Tyler i really appreciate your reply. I found the site on google and im in the hacking process now. I see it takes a while so I will reply here later when my account password hopefully is recovered.
I see what ya did there @16:34. For a while I was like what the heck? am I missing a screw? The housing I had I needed to transfer a few more parts. Thanks for getting me this far. This would be a 8 out of 10 for difficulty.
I went through ifixits affiliate link and it wasn't even the right part i was like what the hell. So now idk whether i just keep the rear glass and try to use the old back housing or switch to a new one. its just slightly bent
pero en la tapa te quedaron unos flex y no los quitaste, entonces si yo tengo una nueva tapa que viene sola como le pongo esos, no dijiste como quitarlos, los que quedaron cerca de la camara
Very helpfull Video I have one question too you I recently replaced the entire body of my iPhone. Before I pressed the screen on the latches, I checked if all functions work. all functions worked so I pressed the screen and tightened the last 2 screws. after screwing the screen face ID stopped working properly. So I unscrewed the screen and looked inside again, checked the face id again, it started working properly so I pressed the screen into the latches again and screwed it. Unfortunately, the problem returned immediately. I don't know what the problem is, the screen puts some pressure on the face ID tape or is the problem elsewhere?
I hope you will be able to help me please? So what happened was my iPhone 11 got thrown and smashed really bad to where the front and back screens are cracked/broken and frame broke as well. So i ordered me new lcd on amazon as well as new back glass. Upon opening the iphone i noticed the battery was bulking and when i pressed on it i can feel juice or liquid. And then i couldnt remove the cracked glass on the back of original one. Then i looked on ebay and saw someone selling iphone 11 back housing only WITHOUT motherboard and I decided to buy it and figure i can just add what ever components that was missing on the back housing. And when i got it in the mail, i put the motherboard on and connected all connectors. Then i went to charge and it wouldnt charge at all and no red battery screen shows either it is just black screen. Do you know what i did wrong? I also tried putting my original tactic engine on… not sure if that helps but still it didnt charge. So now i am left with a new lcd, new back glass, and used back housing with missing components. Please can you kindly advice me? Can you tell me how i can test what components that isnt working? Or what ever you think can be possibility of what i did wrong or what can be wrong? Thank you so much! Sorry for long explanation.
I followed your video. The iPhone volume, and dnd doesn’t work anymore. It doesn’t discover Wi-Fi, I have to type in my address and connect. And doesn’t discover Bluetooth devices
Nice video, I followed up, everything went good. But have an issue, my iphone it's overheating and rebooting about every 3 minutes. Can you help me with that?
Hey How-FixIT, what is the name of the song you use when you first begin to disassemble the iPhone? It’s really relaxing and I’d love to use it to fall asleep. Thank you in advance!
You forget to connect the wireless charging cable to the motherboard. I do same in the video. now no wireless charging for me till i open phone again ((
Das Video hat mir sehr gut geholfen. Ich habe erste mal überhaupt mit Iphone beschäftigt, aber ab jetzt würde ich weiter machen. Vielen Dank weiter soooooo.
Я Айфоны не ремонтирую, да и вообще не занимаюсь ремонтом телефонов, но Ваше видео посмотрел полностью! Уж очень качественный контент (чёткость видео и приятная музыка)! Спасибо!
Hey I have a quick question, once you've assembled the iPhone back together and turn it on did you get the Error messages about the battery and the screen?
I did a whole iphone 11 housing change and no error code popped up after I reassembled it; to anyone who had the same question.
Yes because it’s not a genuine apple screen most probs
@@kierancoffee3343if it was the same screen and battery that came with the phone it won’t do error
You skip the real part ( removing back camera mic fitting)
thats why dislike because prob most people come for
Das Video hat mir sehr gut geholfen. Ich habe erste mal überhaupt mit Iphone beschäftigt, aber ab jetzt würde ich weiter machen.
Vielen Dank weiter soooooo.
Followed this guide to fix my battery thank you ! Now I have no working microphone during calls nor bottom speaker working any ideas ? Took everything apart and made sure everything was plugged in and still nothing
You damaged the flex cable
@@nixonscherbarth1974 is that the cable that’s glued to the frame of the phone . Was gonna he new housing with pre installed items . Must have damage something other than the battery when trying to pick out the back glass 🤦♂️
Do you retain Face ID functionality when swapping housings?
What about flat for charging wireless no connected !!!! 16:45 min
Thank you
he does not use wireless charging function that’s why he didn’t connect 😂😂😂
That lcd dint damage if u put out lcd ribbon before battery ribbon?
Absolutely "spot-on" video.... Only thing that could have been better is if had been done a little more slowly.. I had to open and replace the main microphone board in my friend's phone and this was "EXCELLENT" thank you very much ;-)
the Back Housing with cables link doesnt work anymore you have another one ?
I love the part when you got coffee, that was great!
You probably dont care but does anybody know a trick to log back into an Instagram account..?
I was stupid forgot the account password. I would love any tips you can offer me.
@Talon Kellen Instablaster ;)
@Izaiah Tyler i really appreciate your reply. I found the site on google and im in the hacking process now.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Izaiah Tyler it worked and I now got access to my account again. I'm so happy!
Thanks so much you saved my account !
@Talon Kellen Glad I could help xD
Good job with all the best information and knowledge 👍
What do I need to order back housing with cable installed
I see what ya did there @16:34. For a while I was like what the heck? am I missing a screw? The housing I had I needed to transfer a few more parts. Thanks for getting me this far. This would be a 8 out of 10 for difficulty.
I went through ifixits affiliate link and it wasn't even the right part i was like what the hell. So now idk whether i just keep the rear glass and try to use the old back housing or switch to a new one. its just slightly bent
Great help took apart over a couple of days thought id remember 😂 thanks . Ooh did you forget the wireless plugin.
pero en la tapa te quedaron unos flex y no los quitaste, entonces si yo tengo una nueva tapa que viene sola como le pongo esos, no dijiste como quitarlos, los que quedaron cerca de la camara
Does buying a non oem frame housing will effect networl performance of the phone?
don’t you disconnect the battery before you disconnect the lcd& touch flex?
hi what screw driver did you used to remove the plate that covers the lcd ???
3 head
Very helpfull Video
I have one question too you
I recently replaced the entire body of my iPhone. Before I pressed the screen on the latches, I checked if all functions work. all functions worked so I pressed the screen and tightened the last 2 screws. after screwing the screen face ID stopped working properly. So I unscrewed the screen and looked inside again, checked the face id again, it started working properly so I pressed the screen into the latches again and screwed it. Unfortunately, the problem returned immediately. I don't know what the problem is, the screen puts some pressure on the face ID tape or is the problem elsewhere?
I hope you will be able to help me please? So what happened was my iPhone 11 got thrown and smashed really bad to where the front and back screens are cracked/broken and frame broke as well. So i ordered me new lcd on amazon as well as new back glass. Upon opening the iphone i noticed the battery was bulking and when i pressed on it i can feel juice or liquid. And then i couldnt remove the cracked glass on the back of original one.
Then i looked on ebay and saw someone selling iphone 11 back housing only WITHOUT motherboard and I decided to buy it and figure i can just add what ever components that was missing on the back housing.
And when i got it in the mail, i put the motherboard on and connected all connectors. Then i went to charge and it wouldnt charge at all and no red battery screen shows either it is just black screen.
Do you know what i did wrong? I also tried putting my original tactic engine on… not sure if that helps but still it didnt charge.
So now i am left with a new lcd, new back glass, and used back housing with missing components.
Please can you kindly advice me? Can you tell me how i can test what components that isnt working? Or what ever you think can be possibility of what i did wrong or what can be wrong?
Thank you so much! Sorry for long explanation.
I followed your video. The iPhone volume, and dnd doesn’t work anymore. It doesn’t discover Wi-Fi, I have to type in my address and connect. And doesn’t discover Bluetooth devices
Nice video, I followed up, everything went good. But have an issue, my iphone it's overheating and rebooting about every 3 minutes. Can you help me with that?
if the new housing had a NON ORIGINAL charging port, that is why it reboots. Rebuilt a few of these.
@@CD-SU what if I buy a fake rear casing?
It’s difficult to DIY repair newer iPhones these days because almost everything is paired to that specific iPhone
Where can we get all spare parts bro
Go on eBay
Amazon hot them too
Great video! Could fix my wife's iPhone! Thank you!
thanks , i fix my iphone with your video , very nice
Very good👍
What is the screwdriver at 4:12?
Clean work good job
Thank you sir
Hey How-FixIT, what is the name of the song you use when you first begin to disassemble the iPhone? It’s really relaxing and I’d love to use it to fall asleep. Thank you in advance!
Thanks
Thanks alot🇪🇸
Bro good video but missed to connect wireless charging conector 😂
why you left the wireless cable out? 16.37 in the video?
please make a video about changing iphone xr backdoor with iphone 11 backdoor
What?
can you help me i dont know the name from a part
You missed to connect the QI Charger to the mainboard :(
Awesome very detailed video instructions
So perfect :)
Apple can replace the housing?
Good 🙏🏻
Gracias
thanks
Why my iphone 11 keep restarting after change new housing?
Probably some Shortage on the motherboard or some component that you damaged, check again if you assembled it correctly
Thank you so much.. just the ticket!
Where can I get a housing
NFC antena forgot disassembly it again
I want to do this to change the color of my phone lol
te falto conectar el flex de carga inalambrica
best video thank you
sorry bad How-to...
whi you don't show the top flex removed?
Thought I did everything right but phone won't even turn on now. Waste of money and time. :(
Bruh i wanted to see how to replace the back camera flashlight and that extra sensor but you completely skipped that part
Already opened handset
I saw your video and you don´t connect wireless charging again, take care with this
As I look this up on an iPhone 11
How much would I have to pay to ship an iPhone to you and have you fix it for me?
It would cost 300
I work for how fix it
@@divitmahendroo657 2eeek-.lol 7
@@divitmahendroo657 6 vOLW,Lˋ
Muy buen video saludos desde México 🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽
Dod The cable that works for wireless charging did not connect it😂😂!
Obrigado por nos trazer conhecimento 👏
Merci de nous apporter des connaissances
You forgot to mount the wireless charging
nice bro.. i like it. i subscribe you..
So this is jerryrigeverything pro...
Muito bom 👍 👍 👍
You forget to connect the wireless charging cable to the motherboard. I do same in the video. now no wireless charging for me till i open phone again ((
inutil solo muestra video de montar y desmontar el telefono nada del parte trasera ...no vale para nada esto ..
He sounds tired
Could have done without the stupid coffee break part; but I also noticed that you forgot to hook up the wireless charge connection.
So bad
Das Video hat mir sehr gut geholfen. Ich habe erste mal überhaupt mit Iphone beschäftigt, aber ab jetzt würde ich weiter machen.
Vielen Dank weiter soooooo.
Why my iphone 11 keep restarting after change new housing?
Don't know exactly...
if the new housing had a NON ORIGINAL charging port, that is why it reboots. Rebuilt a few of these.