emacs intro videos like this, willing to reach down to people who don't know much command-line/linux, willing to take time to explain emacs parlance, is really rare. I am a scientist without programming background trying to establish org-mode as my note system, and I want the author to know that your video is immensely helpful
Absolutely seconded! Interesting to hear you are a scientist interested in using it as a notetaking system, because that's what even non-Linux enthusiasts should benefit from.
Ok. I am 70 years old and a retired software developer. I have never used Emacs. I used vi and various IDEs. I never even THOUGHT of using Emacs, because it was “too hard and complex”. After being retired for the past 6 years and playing guitar in bars and restaurants, I got bored and started studying programming again. I eventually got interested in LISP and began looking for an IDE to use. Surprise! The one I heard the most about was EMACS. So, I’ve been trying to read the several books out there on EMACS and they were a confused jumble. I stumbled across your Channel and saw this Absolute Beginners guide. Your explaination of EMACS (so far) has been FANTASTIC. It is very clear and (once I get my Linux partition set up on my Mac) I will review this and other videos you have published on RUclips. I feel that in reality, EMACS is actually easy, now. Thank you a million. I’m gonna REALLY have some fun!!! I really love development and your videos have gotten me excited about it again.
Thank you very much. Learning software engineering and learning emacs is part of our curriculum. Your explanation was very clear for a newbie like me. Thanks.
The only video that makes me want to give emacs a try. Well explained, now I understand that emacs is not a text editor in the first place. It's just like Graphical version of Terminal. The evolution of the Terminal.
Thanks for the very detailed video! Appreciate in particular that you have 2 versions of emacs side by side (fully cutomized, and default), which must be great for newcomers, who hope for the former, and face the later. Downloaded your config, it is clear, well organized, and thorough... a pleasure, I recommend...
Fantastic! I learned the very basics of Emacs around 5 years ago as I was teaching myself C and wanted an oldschool editor. I tend to move between projects and hobbies so it kinda got put to the side and I was exploring other editors, such as VS Code which is really good... but I found I really missed Emacs so I've come back, but suddenly realised I'd forgotten all the bindings lol! So I came to youtube for help and you didn't disappoint, fantastic tutorial, over an hour but it flew by!
I've been using emacs since around 1987. I worked at a company in the 90s writing accounting software. First day on the job, without thinking, I typed "emacs" on my (dumb) terminal. I say "cool, emacs!" Guy in the next cubicle says "you know emacs!?" Lots of emacs nerding out ensued. But over the years I took a break, and this video was great at helping me get back my emacs chops!
I am interested in Linux and the world of cloud and data analytics. I have heard of people debating between vim and emacs. I used vim as a terminal text editor but could not figure out the keybindings for the life of me. I would always go back to using 'nano' in terminal. Consequently - I looked up emacs and your video is very straight-forward and I see there is so much more to emacs than just a terminal interface, the fact it has a GUI and many more features is astounding. It also makes for a very aesthetically pleasing pdf viewer.
Thanks again, David, for publishing such a beginner level video. You have explained the basics very well. I guess I have now finally understood the relationships between buffer, window, and frame. Thumbs up!
Years ago, I flunked out of a Math degree, but my first proper CS lessons were in DrRacket. Although I didn't make it for other reasons, the exposure to the functional-ish paradigm of lisp dialects was the biggest thing that helped me understand computer science. I've gone back to school and am taking a second swing at a CS-adjacent career now, and remembering how much learning Racket helped me, my big extracurricular project has been to learn Common Lisp. Seems like SLIME is a must, and of course Emacs is a must for that. I've been looking for MONTHS for a proper tutorial that could help me tackle the UI that's so unintuitive for a Windows 98 baby like me. But the great things I've heard about Emacs kept me looking, and I'm glad I found a tutorial for honest-to-god know-nothing beginners like myself :) Thanks boss!
People are focusing on the incredible and well explained video but are missing the main point: good lord that org mode font you are using is absolutely gorgeous ! Which one is it?
There's some really psychotic advice in the official Emacs tutorial, like how you should spend time practicing C-f/b/n/p instead of the arrow keys because it will make you so much more productive. It's like they're trying to alienate the maximum amount of people they can.
Fantastic video. I thought about doing a similar thing for my students, but now I'm just having them watch this. Really digging your style. Thank you!!!!!
Man this video is absolutely amazing. I have been using Vim for almost 6 months now, so I got very used to it. But I also wanted to try Emacs as well, I can't stick to Vim because I just liked it, I might like Emacs even more. The thing is, starting was not as easy as in Vim. It was very easy for me to start learning Vim because I found many great tutorials for absolute beginners to explain the core concepts. When I tried to find such a thing for Emacs, it literally took me three days searching for something good, until I found this video. So thank you so much. I will definitely checkout the "Emacs from Scratch" series, very excited to learn Emacs!
Hey Ameer, I'm really happy that you found it and that it was useful for you! Once you get to the third episode of the Emacs From Scratch series, you will feel right at home with evil-mode
@@johnsMITHhhhhh88 This channel helped me a lot getting started with Emacs. And I really liked it. I still prefer Vim and use it as my main editor for most things. But for example I use Emacs for anything Lisp-related. But regardless if you will use it practically after you learn it or not, I think it's still a great idea to give it a try.
Thanks so much for the tutorial. I am learning SICP with scheme in Drracket, but wanted more powerful Linux based code editor that I could customize. Emacs looked like the perfect candidate, and so far it is great.
I have one hint for Emacs/Vim users: rebind your Caps Lock to Left Control Key. It will be really helpfull. Typing many words in capital letters isn't frequent, and you can ease your fingers with this.
I watched this with the intention to skip through it because it's such a long video, unfortunately/fortunately it was full of great information so I didn't want to skip anything!
How do you change the area around the address bar which is also the top of the windows to be dark mode too? I turned on dark mode on emacs and it only turns the middle and bottom area dark grey but not the top. So how do you make the top dark too? Someone HELP PLEASE
Thanks a lot for making these videos! I was very frustrated running Emacs for the first time being naive enough to think that it was just another text editor that should work like every other text editor that I know. So I returned to VS Code and left it alone until I decided to learn about Common Lisp yesterday and Emacs seemed to be the perfect match for it (besides the fact that the VS Code extension didn't really work for me). I think your videos may convince me to actually switch to Emacs completely, although these weird keyboard bindings will take some more getting used to.
I think the reason Shift+arrow keys wasn't allowing you to select text in CUA Mode (Common User Access Mode) is that Org Mode overrules even the CUA Mode settings, since Org Mode uses Shift+arrows for other things (changing TODO states). If you try it in an Elisp file, it works.
It is an editor. As an absolute beginner, I want to know: How to open or create a file for editing. How to navigate within that file. How to add or change text. How to save the changes. How to exit the editor. That is it. I am not asking to be drowned in details not relevant to the above actions. Except for installation, the rest is for later.
Emacs is more than just an editor and has many concepts and features that are different than other programs one might encounter. I covered things that I consider basic essential information that people will need to know, especially when coming from other editors or IDEs.
@@SystemCrafters I appreciate that you have vast experience, and I have heard those amazing things about it. I am happy you make your videos. Maybe after a few months of editing files, I will be ready for this video. Maybe you meant intermediate beginner? One day I will be ready to play with more advanced use. I will remember you and these videos then.
Is "Yank" really "Paste" in Emacs? "Yank" was very often used back in the day for text editors - for example Vi/Vim also has "Yank" - but it's always meant "Copy" in those situations, not "Paste". And as a side note; CUA can sometimes be found in other applications too, it stands for "Common User Access".
I was about to hassle the vim guy at work for this, until I found that yank is for rip up or something like that. I agree more to the vim yank than emacs. That said, I guess you could say that you pull the text out of the... ehm... kill ring ? :D
big Thanks for this /and others/ video! EMACS is awesome! from now EMACS is my Friend. Sic Im on start line but i will continue, thanks one more time SystemCrafters! Have a happy days!
About the slashes.... English is read left-to-right. So imagine your slash as a stick-figure person walking in a very strong wind. If the person is making progress, he's leaning forward into the wind; this is the forward slash / . If the wind is too strong, it's blowing the person backwards; this is the backslash \ .
Yank in Vim is Copy(and add to Register) and Delete is cut "Kill" so maybe it is because they copy Yank from something before them both ?? and Put is paste
My understanding is that the confusion is caused by the different frame of reference we have in mind. According to the Oxford dictionary, yank just means "pull with a jerk". It doesn't imply where are you pulling from. In Emacs, you are pulling from the kill ring and put the pulled out text into the buffer. In Vim, you are pulling from the buffer into a ... register, I guess. The other confusion is whether the thing you pull is a copy or not. Does the pulled thing stays where you pulled it from? In the real world it doesn't...
Thanks for the video. Just a small query- when talking about keybindings you have “C-M-s” as an example. Since M is also ESC shouldn’t this more precisely be written “M-C-s” as the former implies pressing CTRL and ESC then (unclear whether you’d continue to hold CTRL or not or even whether you’d even release ESC) hitting s, rather than pressing and releasing ESC then hitting C-s? I hope that makes sense!
Thanks David! Yep, I figured someone would notice that I didn't mention BSD, I should have mentioned it in passing, but I figured that people who use BSD would probably know how to find Emacs :)
people say you save time by not using the mouse or by using obscure key bindings that don't require much hand movement. I call BS on that. you don't spend your time moving your hands, that takes half a second. you spend your time thinking on how to write, checking what you wrote or waiting for some compiler. all the obscure key bindings do is force you to spend even more time learning them, or thinking about how to perform some editing task instead of just doing it in some intuitive fashion.
Thanx for this helpful video. I really was stucked with Emacs but you helped me to understand it well. but I have a problem, I used this command to install emacs on my macOs and forgot to add --cask, how can I uninstall it and install it again?
58:05 One way to remember if / is backslash or forwardslash, is that this / is the one used by Linux and Linux goes forward, that's why it's for that called forwardslash, instead \ is the one used by Window and they go back, that's why it's called backslash. I recently read something like this, it's good for mnemonics
I've been searching the web to see what is Emacs with no luck. It seems to be a text editor, though for so many million hits it must be something else.
Thank you for taking the time to produce these videos. I really like your delivery. However, as what often occurs in many videos is the absolutely annoying background music. Your voice alone is fantastic. Is there anyway to produce videos without that awful background music? Or, a way for the listener to turn it off? Each moment between background songs, where it’s only you talking is a pleasure, only to be ruined with the subtle buildup of those horrendous musical notes tapping me on the shoulder, competing for my attention needlessly.
To prevent Emacs from resizing your window: Options > Customize Emacs > Specific Option Enter 'frame-inhibit-implied-resize' Click on 'Value Menu' button and select 'Always' Click on 'Apply and Save'
I found a way to prevent Emacs from resizing my frame, but each time I use the minibuffer, it resizes the frame automatically. How can we prevent this behavior?
10/10 for enthusiasm and generosity of spirit in sharing, 10/10 for presentation, but I'm afraid 3/10 for pedagogy. Slow down, stop rushing away with your ideas, break things into small, doable chunks, and please explain the archaic Emacs terminology - "buffers", "C [Control key]", "M [Meta/Alt]", modes etc. I mean this criticism to be constructive and helpful from a very experienced teacher with 35+ years of experience teaching university and senior high school IT and Physics. I love Emacs but haven't used it for over 10 years, (mostly for R-CRAN, & LaTex editing with AUCTeX). Keep up the good work. 😎
emacs intro videos like this, willing to reach down to people who don't know much command-line/linux, willing to take time to explain emacs parlance, is really rare. I am a scientist without programming background trying to establish org-mode as my note system, and I want the author to know that your video is immensely helpful
Thanks Haiteng, I am very glad it was helpful for you!
I'm a "power user", new to Linux, non-programmer and learning about tools commonly used in Linux. I agree, this is a great presentation!
Absolutely seconded!
Interesting to hear you are a scientist interested in using it as a notetaking system, because that's what even non-Linux enthusiasts should benefit from.
Ok. I am 70 years old and a retired software developer. I have never used Emacs. I used vi and various IDEs. I never even THOUGHT of using Emacs, because it was “too hard and complex”. After being retired for the past 6 years and playing guitar in bars and restaurants, I got bored and started studying programming again. I eventually got interested in LISP and began looking for an IDE to use. Surprise! The one I heard the most about was EMACS. So, I’ve been trying to read the several books out there on EMACS and they were a confused jumble. I stumbled across your Channel and saw this Absolute Beginners guide. Your explaination of EMACS (so far) has been FANTASTIC. It is very clear and (once I get my Linux partition set up on my Mac) I will review this and other videos you have published on RUclips. I feel that in reality, EMACS is actually easy, now. Thank you a million. I’m gonna REALLY have some fun!!! I really love development and your videos have gotten me excited about it again.
That's really awesome to hear! Emacs is a ton of fun and a never-ending rabbit hole. You'll get a lot of mileage out of it before it gets boring :)
What a heart warming read.
I used emacs on and off for years, but it has been a decade since I touched it. Your series on emacs is helping me come back up to speed.
Awesome, glad to hear that!
Thank you very much. Learning software engineering and learning emacs is part of our curriculum. Your explanation was very clear for a newbie like me. Thanks.
Awesome, glad to hear it!
Positively surprised learning Emacs is part of your curriculum.
@@LinkEX learning Git, Emacs and Vim is part of our curriculum as well
dude, you are the hero for someone unfamiliar with english. really save my time to read the mannual.
The only video that makes me want to give emacs a try.
Well explained, now I understand that emacs is not a text editor in the first place.
It's just like Graphical version of Terminal. The evolution of the Terminal.
Thanks for the very detailed video!
Appreciate in particular that you have 2 versions of emacs side by side (fully cutomized, and default), which must be great for newcomers, who hope for the former, and face the later.
Downloaded your config, it is clear, well organized, and thorough... a pleasure, I recommend...
Fantastic! I learned the very basics of Emacs around 5 years ago as I was teaching myself C and wanted an oldschool editor. I tend to move between projects and hobbies so it kinda got put to the side and I was exploring other editors, such as VS Code which is really good... but I found I really missed Emacs so I've come back, but suddenly realised I'd forgotten all the bindings lol! So I came to youtube for help and you didn't disappoint, fantastic tutorial, over an hour but it flew by!
Time to learn it again the 'right way'. Thanks for this!
I've been using emacs since around 1987. I worked at a company in the 90s writing accounting software. First day on the job, without thinking, I typed "emacs" on my (dumb) terminal. I say "cool, emacs!" Guy in the next cubicle says "you know emacs!?" Lots of emacs nerding out ensued. But over the years I took a break, and this video was great at helping me get back my emacs chops!
That's a great story :) Glad to hear you're getting back into Emacs!
@@lepidoptera9337 I'll start using vi when they move to version vii.
😜
I have been using Vim and Tmux for 10+ years, but I start a job with Clojure on Monday so I thought I'd move to Emacs. This guy has blown my mind,
How's the clojure going?
Bless you for making this video, I have been thinking of making my own EMACS instead of using DOOM EMACS and I am being blessed with this video.
I am interested in Linux and the world of cloud and data analytics. I have heard of people debating between vim and emacs. I used vim as a terminal text editor but could not figure out the keybindings for the life of me. I would always go back to using 'nano' in terminal. Consequently - I looked up emacs and your video is very straight-forward and I see there is so much more to emacs than just a terminal interface, the fact it has a GUI and many more features is astounding. It also makes for a very aesthetically pleasing pdf viewer.
Try micro editor
Thank you! Definitely the first video anyone should watch. Made things clear. Looking forward to starting your Emacs from scratch!
Thanks again, David, for publishing such a beginner level video. You have explained the basics very well. I guess I have now finally understood the relationships between buffer, window, and frame. Thumbs up!
Thanks Martin!
I can already tell this is one of those videos I will have to watch a few times. Thanks for the great Emacs content!
Years ago, I flunked out of a Math degree, but my first proper CS lessons were in DrRacket. Although I didn't make it for other reasons, the exposure to the functional-ish paradigm of lisp dialects was the biggest thing that helped me understand computer science.
I've gone back to school and am taking a second swing at a CS-adjacent career now, and remembering how much learning Racket helped me, my big extracurricular project has been to learn Common Lisp. Seems like SLIME is a must, and of course Emacs is a must for that.
I've been looking for MONTHS for a proper tutorial that could help me tackle the UI that's so unintuitive for a Windows 98 baby like me. But the great things I've heard about Emacs kept me looking, and I'm glad I found a tutorial for honest-to-god know-nothing beginners like myself :) Thanks boss!
so you have always loved mathematics?
People are focusing on the incredible and well explained video but are missing the main point: good lord that org mode font you are using is absolutely gorgeous ! Which one is it?
There's some really psychotic advice in the official Emacs tutorial, like how you should spend time practicing C-f/b/n/p instead of the arrow keys because it will make you so much more productive. It's like they're trying to alienate the maximum amount of people they can.
Fantastic video. I thought about doing a similar thing for my students, but now I'm just having them watch this. Really digging your style. Thank you!!!!!
Thanks so much for your support Marcus! Glad that the video might be able to help your students too!
Man this video is absolutely amazing.
I have been using Vim for almost 6 months now, so I got very used to it. But I also wanted to try Emacs as well, I can't stick to Vim because I just liked it, I might like Emacs even more.
The thing is, starting was not as easy as in Vim. It was very easy for me to start learning Vim because I found many great tutorials for absolute beginners to explain the core concepts. When I tried to find such a thing for Emacs, it literally took me three days searching for something good, until I found this video. So thank you so much.
I will definitely checkout the "Emacs from Scratch" series, very excited to learn Emacs!
Hey Ameer, I'm really happy that you found it and that it was useful for you! Once you get to the third episode of the Emacs From Scratch series, you will feel right at home with evil-mode
Im curious, how is it for you? I'm a vim user who stubbornly refuses to learn anything else, but I don't know what I'm missing out on!
@@johnsMITHhhhhh88 This channel helped me a lot getting started with Emacs. And I really liked it. I still prefer Vim and use it as my main editor for most things. But for example I use Emacs for anything Lisp-related. But regardless if you will use it practically after you learn it or not, I think it's still a great idea to give it a try.
Thank you so much for making a great video for users of all levels. The emacs concepts are well explained.
Without a doubt the best 'intro to Emacs Video'.
Was looking for a similar video for a long time.
Thanks a ton!
Really appreciated for all your great job teaching Emacs!! Kudos david!!
I like the background music makes it feel like I'm listening to the radio which makes it easier to pay attention.
Best Emacs video for beginners I've seen so far!
It currently 6Am and I just finished watching ur emacs from scratch 4ep thank u for ur amazing content
This was great, I learned alot, but nothing will replace hands on learning. Thanks for this video!
This is the best video out there. I need to look at starting from zero as a refresher course. Thank You.
Your channel is a godsend. Thank you very much for all the effort you put into this!
Dude, this is the only video that works. Thanks for posting!
Thanks so much for the tutorial. I am learning SICP with scheme in Drracket, but wanted more powerful Linux based code editor that I could customize. Emacs looked like the perfect candidate, and so far it is great.
This is very high quality work - just found your channel and it's awesome!
Thanks a lot Andrew!
Good introduction. That being said - in the end I'm convinced to stay with vim (and sometimes VS Code).
I just cringed when I saw how bad the text editing was... all those finger gymnastics seem like a cramp magnet.
I have one hint for Emacs/Vim users: rebind your Caps Lock to Left Control Key. It will be really helpfull. Typing many words in capital letters isn't frequent, and you can ease your fingers with this.
I have emacs installed but I can't figure out how to use it in gui mode. Do you know how?
I watched this with the intention to skip through it because it's such a long video, unfortunately/fortunately it was full of great information so I didn't want to skip anything!
This is a detailed explanation of emacs to beginners. Thank you for simplifying.
How do you change the area around the address bar which is also the top of the windows to be dark mode too? I turned on dark mode on emacs and it only turns the middle and bottom area dark grey but not the top. So how do you make the top dark too? Someone HELP PLEASE
Just what I was looking for
Thanks a lot for making these videos! I was very frustrated running Emacs for the first time being naive enough to think that it was just another text editor that should work like every other text editor that I know. So I returned to VS Code and left it alone until I decided to learn about Common Lisp yesterday and Emacs seemed to be the perfect match for it (besides the fact that the VS Code extension didn't really work for me). I think your videos may convince me to actually switch to Emacs completely, although these weird keyboard bindings will take some more getting used to.
Emacs is a different beast but it is unlike anything else out there! Once you invest the time to learn it, it will stay with you forever
thanks for the vid! very clear and useful! ( :
could i ask what font that is please? very nice!
I think the reason Shift+arrow keys wasn't allowing you to select text in CUA Mode (Common User Access Mode) is that Org Mode overrules even the CUA Mode settings, since Org Mode uses Shift+arrows for other things (changing TODO states). If you try it in an Elisp file, it works.
I believe you're right about that! Org Mode's bindings definitely get in the way of showing the defaults
Awesome video. You are brilliant at explaining how things work and your presentations never leave any steps out. Thank you!
It is an editor. As an absolute beginner, I want to know:
How to open or create a file for editing.
How to navigate within that file.
How to add or change text.
How to save the changes.
How to exit the editor.
That is it. I am not asking to be drowned in details not relevant to the above actions.
Except for installation, the rest is for later.
Emacs is more than just an editor and has many concepts and features that are different than other programs one might encounter. I covered things that I consider basic essential information that people will need to know, especially when coming from other editors or IDEs.
@@SystemCrafters I appreciate that you have vast experience, and I have heard those amazing things about it. I am happy you make your videos. Maybe after a few months of editing files, I will be ready for this video. Maybe you meant intermediate beginner? One day I will be ready to play with more advanced use. I will remember you and these videos then.
awesome content really, as a beginner now am able to completely deal with basics
and wanna to thank you aloooooot
Thank you, David. 20 minutes in and I already feel a lot more comfortable on emacs.
That's great to hear!
Like always a high quality content. Thanks!
Also is there a way to customise your shortcut preferences (eg. instead of C + / I want C +Z)?
Is "Yank" really "Paste" in Emacs?
"Yank" was very often used back in the day for text editors - for example Vi/Vim also has "Yank" - but it's always meant "Copy" in those situations, not "Paste".
And as a side note; CUA can sometimes be found in other applications too, it stands for "Common User Access".
I was about to hassle the vim guy at work for this, until I found that yank is for rip up or something like that. I agree more to the vim yank than emacs. That said, I guess you could say that you pull the text out of the... ehm... kill ring ? :D
Terminal mode may not even have color. Consider running from a vt220. You had one color: amber, green, or white depending on the CRT you specified.
big Thanks for this /and others/ video! EMACS is awesome! from now EMACS is my Friend. Sic Im on start line but i will continue, thanks one more time SystemCrafters! Have a happy days!
Emacs is awesome, have fun!
I now may know enough to get started in making use of these skills, knowledge, and wisdom you're passing along.
Thank you, so much!
looking for a new text editor and found so much more! after really getting it maybe i'll run it as DE too! thank you, suuubbed!
Great didactic! I'm willing to give Emacs another shot pretty much because of your channel.
Very glad to hear that!
About the slashes....
English is read left-to-right. So imagine your slash as a stick-figure person walking in a very strong wind. If the person is making progress, he's leaning forward into the wind; this is the forward slash / . If the wind is too strong, it's blowing the person backwards; this is the backslash \ .
Congratulations for the excellent content. Will definitely check the other videos out. Thanks!
Thanks a lot, glad you liked it!
Great video! Thank you for the upload. I went to subscribe but it turns out I was already subscribed.
I use multiple frames when working on quite different projects/activities. But often only one is up as a desktop window at a time.
Thank you so much bro. Sending virtual hugs. Worked like a charm ;-)
Coming from vim, i want to master both sides to decide on what is better
Blew my mind. I wish I had discovered emacs much earlier!
@@lepidoptera9337 hahaha why would you say that?
Thanks for the video I learned some good ideas from you See you next time :)
This is awesome! Thanks so much for sharing!
thanks you for this video about starting using emacs in real life! I need that :)
Thank you so much. Great Emacs 101 vid.
Thank you for providing this really great content!
Thank you very much, you make such a great videos!
Yank in Vim is Copy(and add to Register) and Delete is cut "Kill" so maybe it is because they copy Yank from something before them both ?? and Put is paste
Maybe! It's even more confusing that the terminology between Emacs and Vim is reversed :)
@@SystemCrafters yes but yank sounds like cut so both programs do it ... Confusing
My understanding is that the confusion is caused by the different frame of reference we have in mind.
According to the Oxford dictionary, yank just means "pull with a jerk".
It doesn't imply where are you pulling from.
In Emacs, you are pulling from the kill ring and put the pulled out text into the buffer.
In Vim, you are pulling from the buffer into a ... register, I guess.
The other confusion is whether the thing you pull is a copy or not.
Does the pulled thing stays where you pulled it from?
In the real world it doesn't...
Thanks for the video. Just a small query- when talking about keybindings you have “C-M-s” as an example. Since M is also ESC shouldn’t this more precisely be written “M-C-s” as the former implies pressing CTRL and ESC then (unclear whether you’d continue to hold CTRL or not or even whether you’d even release ESC) hitting s, rather than pressing and releasing ESC then hitting C-s? I hope that makes sense!
Welcome!
Your videos are fantastic. Keep it up!
Simple and concise, great video. You can install on freeBSD, and other BSDs
Thanks David! Yep, I figured someone would notice that I didn't mention BSD, I should have mentioned it in passing, but I figured that people who use BSD would probably know how to find Emacs :)
Thanks bro, you are the best, love it!
people say you save time by not using the mouse or by using obscure key bindings that don't require much hand movement. I call BS on that. you don't spend your time moving your hands, that takes half a second. you spend your time thinking on how to write, checking what you wrote or waiting for some compiler. all the obscure key bindings do is force you to spend even more time learning them, or thinking about how to perform some editing task instead of just doing it in some intuitive fashion.
Amazing work, thank you so much for sharing,
informative.
Thanx for this helpful video. I really was stucked with Emacs but you helped me to understand it well. but I have a problem, I used this command to install emacs on my macOs and forgot to add --cask, how can I uninstall it and install it again?
Very good introduction videos. But... when I became aware of the background music I could not listen anymore. :(
58:05 One way to remember if / is backslash or forwardslash, is that this / is the one used by Linux and Linux goes forward, that's why it's for that called forwardslash, instead \ is the one used by Window and they go back, that's why it's called backslash. I recently read something like this, it's good for mnemonics
Absolute quality
Good tutorial, I was frustrated at getting started with emacs, the huge set of shortcut keys block my way.
very nice emacs tutorial , really thanx
I've been searching the web to see what is Emacs with no luck. It seems to be a text editor, though for so many million hits it must be something else.
Thank you for taking the time to produce these videos. I really like your delivery. However, as what often occurs in many videos is the absolutely annoying background music. Your voice alone is fantastic. Is there anyway to produce videos without that awful background music? Or, a way for the listener to turn it off? Each moment between background songs, where it’s only you talking is a pleasure, only to be ruined with the subtle buildup of those horrendous musical notes tapping me on the shoulder, competing for my attention needlessly.
To prevent Emacs from resizing your window:
Options > Customize Emacs > Specific Option
Enter 'frame-inhibit-implied-resize'
Click on 'Value Menu' button and select 'Always'
Click on 'Apply and Save'
Great content man keep it up
Thanks for the video =)
Thx a lot ! You're a life saver
I found a way to prevent Emacs from resizing my frame, but each time I use the minibuffer, it resizes the frame automatically.
How can we prevent this behavior?
Good basics ! Thanks !
I'd rather be dead in Idaho than spend one minute with this.
Thank you for this video.
10/10 for enthusiasm and generosity of spirit in sharing, 10/10 for presentation, but I'm afraid 3/10 for pedagogy. Slow down, stop rushing away with your ideas, break things into small, doable chunks, and please explain the archaic Emacs terminology - "buffers", "C [Control key]", "M [Meta/Alt]", modes etc. I mean this criticism to be constructive and helpful from a very experienced teacher with 35+ years of experience teaching university and senior high school IT and Physics. I love Emacs but haven't used it for over 10 years, (mostly for R-CRAN, & LaTex editing with AUCTeX). Keep up the good work. 😎
thank you for this
I really appreciate this video, but you missed a step. how do you actually launch the program?
use your ubuntu terminal
Very useful video. Great job !
Thanks Eric!
Thank You for this 🙏
Awesome video! Also I'm now going to start a metal band called Kill Ring.
🤘
Why can't i access to the *Warning* buffer? It's because i need to install something or it's coz is empty.
It only shows up when there is a warning that occurs during startup
Subscribed!