How to turn your garage into a mechanic shop in 4k

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • Shop update. Who says you can't have a mechanic shop in a 2 1/2 car garage? Tried to make video in 4k for the first time too.
    Disclaimer:
    Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Комментарии • 98

  • @caliskier
    @caliskier 2 года назад +2

    “My garage, I’m loving it!” Nice! Nice job on the video thank you very much

  • @ProgdudeXXX
    @ProgdudeXXX 3 года назад +2

    Thank you for taking acoustics into consideration for your videos. Heavy inflected reverb sucks when you're trying to listen to someone talk. Good job! 👍 Nice setup too!

  • @mikesims9695
    @mikesims9695 3 года назад +2

    Awesome ingenuity. I'm impressed to see how you use your garage to make the big bucks. Thanks for the video and sharing a portion of your life with us strangers.

  • @johnferguson5318
    @johnferguson5318 3 года назад +2

    Enjoyed it. I want to make a little shop myself and this gives me some good direction. Thanks.

  • @jgonzalez6250
    @jgonzalez6250 Год назад

    Exactly what im looking into currently! Have a small garage but the MaxJack should be all i need! Nice setup brother! Godspeed

  • @nathano148
    @nathano148 Месяц назад

    Awesome video nice lil shop

  • @nealmont
    @nealmont 3 года назад

    Almost identical to my setup. I was able to put a 6 foot extension on the garage for compressor, lawnmower, snowblower, yard tools and waste oil furnace--I cut a hole in the wall, ($$$$ initial expense) but have saved in the long run. Was your deal planned? Mine wasn't; it was supposed to be temporary 'til I found a good job and 30 years later here I still am. Can't afford the tool trucks anymore--Harbor Freight and eBay now--looks the same for you. It beats the heck out of a job for sure! Good for you! Did you notice the comment below about the "big bucks?" Yeah right ha ha.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад +3

      God laughs most when man makes plans.

  • @jheetman
    @jheetman Год назад

    Nice little shop! I see you forgot to mention the jambox tho, gotta have tunes while you work!!!

  • @BarnStangz
    @BarnStangz 3 года назад

    Shop is looking really nice there Mr. Saki! I have some of the Amazon cheapo LED lights and they are really good for the price. Hope you have a good holiday! Make sure you do some shopping at Manards.

  • @howifixit6206
    @howifixit6206 2 года назад

    I like the get it done attitude

  • @metube2824
    @metube2824 2 года назад

    I have found that having a level, smooth as possible flore is the best if you are building from scratch.For small shops for sure.You can roll around on the chair (I like the chair that has tool tray or basket under the seat ) or smooth if laying down on caster wheels.Something I'm kicking around also with my Brother on His Shop. is a grease pit, because if you can't go up you can still go down.With a pit you can just put it over the hole,and still turn the tires.My dream is a pit and lift combo.With a pit you can drop a Trans.and drive train,whatever under it,close the pit with a lid and pull the motor or whatever from the top with electric motor hoist too?

    • @RustBeltAuto
      @RustBeltAuto  2 года назад

      With a pit, you can fall in.

    • @metube2824
      @metube2824 2 года назад

      @@RustBeltAuto All of the old time pits I have see had two long hatches that covered the trench.I would call it more of a trench between the wheelbase as they are more long then wide.I think grease pit is more of a knick name that they were given because thay mainly used them for a way to grease all of the fittings ,but you could stand up to your shoulders and do drivetrains and exhaust and whatnot.I have only seen them,I'm going to look up some back story's.But they made lids for them that would flip open on hinges made of sheet metal.

  • @brianbacich9999
    @brianbacich9999 3 года назад +1

    Love the space. Question for ya: if you had to pick the most profitable mechanic jobs what would those usually be? How much do you charge for your time fixing customers vehicles? Thanks

    • @RustBeltAuto
      @RustBeltAuto  3 года назад +3

      Brake jobs are the bread and butter of the industry.

  • @TheBeardedJeeper
    @TheBeardedJeeper 2 года назад

    awesome looking shop. I wish I had that much room lol I have a one car and it makes it tough

  • @ColPay1
    @ColPay1 3 года назад +1

    Good for you man, keep the overhead low!

  • @shawnsrepairs9514
    @shawnsrepairs9514 Год назад

    Nice little shop. I like it.

  • @CHIBA280CRV
    @CHIBA280CRV 3 года назад +1

    Amazing how you can run a shop with 2 (15 amp breakers) . I have purchase the lift and I think I’m going to cut the floor and pour 1 foot deep footings.. my floor is not cracked , but not sure what psi concrete they used , and don’t know how to check for that.. thanks

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      It's usually all reinforced. Maxjax says 2500psi is fine. That's the standard minimum for everything I think. You will know how thick it is (4") when you drill your first hole.

  • @wolleysegap9740
    @wolleysegap9740 3 года назад

    I like it. I like it a lot. Nice set up, Rusty.

  • @creammachine5160
    @creammachine5160 3 года назад

    very nice setup.its a garage that is realistic and do-able.
    it’s quite the toolbox you have there though.
    u did couple oil changes to earn that baby!

  • @spelunkerd
    @spelunkerd 3 года назад

    Interesting to see the 4K detail.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      Took a day to upload 4k. I can't watch it in 4k either.

    • @spelunkerd
      @spelunkerd 3 года назад

      @@RustBeltAuto Yeah, I know what you mean. Big issue for me is hard disc space.

  • @MrZimmaframe
    @MrZimmaframe 6 месяцев назад

    Lol i can't help but think you sound like Peter Griffin 😄.

  • @jeremyfulton3219
    @jeremyfulton3219 2 года назад +1

    How do you like the harbor freight press? And is the transmission jack the 2000 pound one? Regardless,how do you like it? I was looking at both of those today..

    • @RustBeltAuto
      @RustBeltAuto  2 года назад +1

      The press is great. The hand adjuster knobs on the jack is completely annoying, and I had to modify them, because they stripped out. I usually try to use a ratcheting strap on it somehow, because the chain is retarded. I have ideas for the pad, because it doesn't hold a transmission, unless it is flat. Usually put the thing on my motorcycle lift, because then I can work off the floor, and use my low lift car hoist.

    • @jeremyfulton3219
      @jeremyfulton3219 2 года назад

      Great. Thanks for the info. I'm getting more equipment then I'm probably going to get the maxjax. Just finished insulating and installing a heater.

    • @RustBeltAuto
      @RustBeltAuto  2 года назад

      @@jeremyfulton3219 nice. Good luck!

  • @billrimmer5596
    @billrimmer5596 3 года назад

    Very nice set up!!!

  • @john-michaelnixsr.8646
    @john-michaelnixsr.8646 10 месяцев назад

    It looks great!

  • @Horizonchronicles.
    @Horizonchronicles. 6 месяцев назад

    Thanks

  • @outfitsgarage88
    @outfitsgarage88 2 года назад

    Very cool man. I'm working on getting a lift myself.

  • @jeffgoss5434
    @jeffgoss5434 3 года назад

    Thanks for showing your setup! Can you tell me how far apart you spaced your MaxxJax lifts, and if you think their position has been ideal for you and all sizes of cars? I have one as well and it seems like yours is alot farther apart than mine. I recall I set mine for their recommended spec for medium car/trucks, as I never work on full size pickups or such. I'd like to space them out a bit more, if it gives me more flexibility to align the lift pads under various cars.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      I have a video on the thing somewhere. Has the measurements in it.

  • @SIM3PAUL
    @SIM3PAUL 2 года назад

    With your air compressor behind all the foam, do you still reach back and drain the water out when condensation builds i the tank or do you have another method for removing it? Or... do you just say screw it and keep trucking?

    • @RustBeltAuto
      @RustBeltAuto  2 года назад +2

      I plumbed a hose outside of the box, and installed a ball valve.

  • @bearpawtimber8739
    @bearpawtimber8739 3 года назад +1

    Where's your beer fridge?

  • @rfb_tax
    @rfb_tax Год назад

    I'm so interested, I may not hear how tall the roof is. Would you mind letting me know how well vehicles go up with that height restriction? Cheers man legend

    • @RustBeltAuto
      @RustBeltAuto  Год назад +1

      I don't have problems lifting anything this way.

  • @nocheExplorer
    @nocheExplorer 2 года назад

    I knew you were from Minnesota . you sound like jesse "the body" ventura.

  • @BottleJackBuddy
    @BottleJackBuddy 3 года назад

    Thanks for the video.

  • @sangoprime
    @sangoprime 3 года назад

    Awesome vid man. What camera and audio setup are you using ?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад +1

      Galaxy s10e, and a 6$ 3.5mm microphone.

    • @sangoprime
      @sangoprime 3 года назад

      @@RustBeltAuto nice rig. Thanks

  • @miguelsalazar3239
    @miguelsalazar3239 3 года назад

    Love it!

  • @mrsemifixit
    @mrsemifixit 3 года назад

    How are those led lights installed? Do they plug into each other and only one plugged into an outlet or wired in? Been looking at buying some

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      Yes. They are series circuit.

    • @mrsemifixit
      @mrsemifixit 3 года назад

      @@RustBeltAuto Are they hard wired in or just plugged into a receptacle at one end?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      www.amazon.com/gp/aw/d/B01HBT3BVM?psc=1&ref=ppx_pop_mob_b_asin_title
      I got these.

  • @GatheringSticks
    @GatheringSticks 2 года назад

    How many tanks do you go through in a cold winter?

    • @RustBeltAuto
      @RustBeltAuto  2 года назад

      I leave the heat off when I'm not working. The most I have used so far is about 4 tanks.

  • @tmcdonald1114
    @tmcdonald1114 3 года назад

    Do a tool box tour next.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      Lol... I have one from a long time ago. People love it, or hate it.

  • @MrBeeradb1
    @MrBeeradb1 3 года назад

    How could I get a vehicle serviced by you? You seem to be very down to earth and honest.I live in elk river.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      It's not who you know, It's how you know them.

    • @mediaguy4037
      @mediaguy4037 3 года назад

      @@RustBeltAuto Um..........I'm not going to?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      @@mediaguy4037 I'm scared.

  • @xXEvangelXx
    @xXEvangelXx 3 года назад

    What sound system you got up in the corner?

  • @madskills2013
    @madskills2013 3 года назад

    I knew right away. He was a Minnesotan

  • @jeremyfulton22
    @jeremyfulton22 3 года назад

    How deep is garage? I am looking at doing some what of the same set up. Thanks. I am also in MN. Way up North though.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      It's about 22'd x24'w I think.

    • @jeremyfulton22
      @jeremyfulton22 3 года назад

      Ok thanks. Mine is 25Ft. So should be good. I am just worried about long bed trucks hitting the door.

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      @@jeremyfulton22 anything bigger than a suburban is getting a little long.

    • @jeremyfulton22
      @jeremyfulton22 3 года назад

      Ok.

  • @davebuchanan9761
    @davebuchanan9761 3 года назад

    im thinking of getting a lift like that one, did u wire it to 110 or 220?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад +1

      It calls for 30 amp 115v. My 15amp is doing the job.

    • @davebuchanan9761
      @davebuchanan9761 3 года назад

      @@RustBeltAuto nice! thank you, love ur channel!!!

  • @scottlee871
    @scottlee871 3 года назад

    Homer Simpson. 😂

  • @mediaguy4037
    @mediaguy4037 3 года назад

    Someone asked me to do a toolbox tour? Um......I'm not going to?

  • @migomurk2581
    @migomurk2581 3 года назад

    Hey I’m in Minnesota I have a 77 Monte Carlo and I need a mechanic how do I get in touch🙂

  • @DIYVariety
    @DIYVariety 3 года назад

    How big of compressor

  • @gingerwizard69
    @gingerwizard69 2 года назад

    where at in minnesota are you?

    • @RustBeltAuto
      @RustBeltAuto  2 года назад

      The arm pit of it.

    • @gingerwizard69
      @gingerwizard69 2 года назад

      @@RustBeltAuto twin ports? Im in the Ice Box OF the nation

    • @RustBeltAuto
      @RustBeltAuto  2 года назад

      @@gingerwizard69 no. State capitol. I like twin ports.

  • @BubbaAyers1969
    @BubbaAyers1969 3 года назад

    Nice

  • @samwittstruck.6685
    @samwittstruck.6685 3 года назад

    Parts cleaner?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      Brake cleaner. I don't appreciate stinky parts cleaning bins.

  • @aaronmcfarland5440
    @aaronmcfarland5440 3 года назад

    what height is your roof?

    • @RustBeltAuto
      @RustBeltAuto  3 года назад

      about 10" without garage door opener. The actual roof is 15"

  • @paradagaragemotorsports1657
    @paradagaragemotorsports1657 2 года назад

    Peter griffin's garage family guy

  • @maxki8340
    @maxki8340 2 года назад

    Mysteries of the Bible for those who don't know the Bible was meant to be a mystery for those who corrupted the Bible could fall into their corruptions of scripture, this is why Jesus says in Matthew 11:27All things have been delivered to Me by My Father, and no one knows the Son except the Father. Nor does anyone know the Father except the Son, and the one to whom the Son wills to reveal Him.
    Matthew 13:11
    He answered and said to them, “Because it has been given to you to know the mysteries of the kingdom of heaven, but to them it has not been given.
    Luke 8:10
    And He said, “To you it has been granted to know the mysteries of the kingdom of God, but to the rest it is in parables, so that seeing they may not see, and hearing they may not understand
    Gospel of Thomas 62
    62 Jesus said, "I disclose my mysteries to those [who are worthy] of [my] mysteries.
    Amos 3:7
    Surely the Lord God does nothing
    Unless He reveals His secret counsel
    To His servants the prophets.
    Romans 16:25
    Now to Him who is able to establish you according to my gospel and the preaching of Jesus Christ, according to the revelation of the mystery which has been kept secret for long ages past,
    Amos 8:11
    11 Behold, the days come, saith the Lord God, that I will send a famine in the land, not a famine of bread, nor a thirst for water, but of hearing the words of the Lord:
    1 Corinthians 2:7
    but we speak God’s wisdom in a mystery, the hidden wisdom which God predestined before the ages to our glory;
    Colossians 1:26
    that is, the mystery which has been hidden from the past ages and generations, but has now been manifested to His saints,
    Ephesians 1:9
    He made known to us the mystery of His will, according to His kind intention which He purposed in Him
    Romans 11:25
    For I do not want you, brethren, to be uninformed of this mystery-so that you will not be wise in your own estimation-that a partial hardening has happened to Israel until the fullness of the Gentiles has come in;
    Colossians 1:27
    to whom God willed to make known what is the riches of the glory of this mystery among the Gentiles, which is Christ in you, the hope of glory.
    Ephesians 1:9-10
    He made known to us the mystery of His will, according to His kind intention which He purposed in Him with a view to an administration suitable to the fullness of the times, that is, the summing up of all things in Christ, things in the heavens and things on the earth. In Him
    1 Corinthians 15:51-53
    Behold, I tell you a mystery; we will not all sleep, but we will all be changed, in a moment, in the twinkling of an eye, at the last trumpet; for the trumpet will sound, and the dead will be raised imperishable, and we will be changed. For this perishable must put on the imperishable, and this mortal must put on immortality.
    Revelation 10:7
    but in the days of the voice of the seventh angel, when he is about to sound, then the mystery of God is finished, as He preached to His servants the prophets.
    Ephesians 6:19
    and pray on my behalf, that utterance may be given to me in the opening of my mouth, to make known with boldness the mystery of the gospel,
    Ephesians 3:4-9
    By referring to this, when you read you can understand my insight into the mystery of Christ, which in other generations was not made known to the sons of men, as it has now been revealed to His holy apostles and prophets in the Spirit; to be specific, that the Gentiles are fellow heirs and fellow members of the body, and fellow partakers of the promise in Christ Jesus through the gospel,read more.
    of which I was made a minister, according to the gift of God’s grace which was given to me according to the working of His power. To me, the very least of all saints, this grace was given, to preach to the Gentiles the unfathomable riches of Christ, and to bring to light what is the administration of the mystery which for ages has been hidden in God who created all things;
    Isaiah 28:12-13
    12 to whom he said,
    “This is the resting place, let the weary rest”;
    and, “This is the place of repose”-
    but they would not listen.
    13 So then, the word of the Lord to them will become:
    “Precept upon precept, precept upon precept,Line upon line, line upon line,
    Here a little, there a little,” That they might go and fall backward, and be broken and snared and caught.
    Mark 10:5
    And Jesus answered and said to them, “Because of the hardness of your heart he wrote you this precept.
    Isaiah 8:14
    He will be as a sanctuary, But a stone of stumbling and a rock of offense To both the houses of Israel, As a trap and a snare to the inhabitants of Jerusalem.
    Jeremiah 23:20
    20 The anger of the Lord will not turn back until he has done everything he intends to do. In the last days you will understand this clearly.
    What's made known clearly, the Bible became a mystery for those who corrupted it would not find the way to heaven in other lives and fall in their own traps in corruptions of scripture teachings to go to heaven.
    Psalm 10:2
    In pride the wicked hotly pursue the afflicted;
    Let them be caught in the plots which they have devised.
    Jeremiah 5:26
    ‘For wicked men are found among My people,
    They watch like fowlers lying in wait;
    They set a trap,
    They catch men.
    Proverbs 6:2
    If you have been snared with the words of your mouth,
    Have been caught with the words of your mouth,
    Proverbs 12:13
    An evil man is ensnared by the transgression of his lips,
    But the righteous will escape from trouble
    Jeremiah 9:8
    “Their tongue is a deadly arrow;
    It speaks deceit;
    With his mouth one speaks peace to his neighbor,
    But inwardly he sets an ambush for him.
    Habakkuk 2:9-11
    “Woe to him who gets evil gain for his house
    To put his nest on high,
    To be delivered from the hand of calamity!
    “You have devised a shameful thing for your house
    By cutting off many peoples;
    So you are sinning against yourself.
    “Surely the stone will cry out from the wall,
    And the rafter will answer it from the framework.
    Proverbs 13:14
    The teaching of the wise is a fountain of life,
    To turn aside from the snares of death.
    The warnings of these Bible corruptions of them going to do before hand.
    Psalm 64:6
    They devise injustices, saying,
    “We are ready with a well-conceived plot”;
    For the inward thought and the heart of a man are deep.
    Psalm 83:5
    For they have conspired together with one mind;
    Against You they make a covenant:
    Proverbs 6:14
    Who with perversity in his heart continually devises evil,
    Who spreads strife.
    Psalm 38:12
    Those who seek my life lay snares for me;
    And those who seek to injure me have threatened destruction,
    And they devise treachery all day long.
    Ephesians 4:14
    As a result, we are no longer to be children, tossed here and there by waves and carried about by every wind of doctrine, by the trickery of men, by craftiness in deceitful scheming;
    Proverbs 28:10
    He who leads the upright astray in an evil way
    Will himself fall into his own pit,
    But the blameless will inherit good.
    Isaiah 32:7
    As for a rogue, his weapons are evil;
    He devises wicked schemes
    To destroy the afflicted with slander,
    Even
    Joshua 23:12-13
    For if you ever go back and cling to the rest of these nations, these which remain among you, and intermarry with them, so that you associate with them and they with you, know with certainty that the Lord your God will not continue to drive these nations out from before you; but they will be a snare and a trap to you, and a whip on your sides and thorns in your eyes, until you perish from off this good land which the Lord your God has given you.
    Psalm 21:11
    Though they intended evil against You
    And devised a plot,
    They will not succeed.

  • @Akbarali-xg2ut
    @Akbarali-xg2ut 5 месяцев назад

    Bro im machenic forum galf cantri need Georgia

    • @RustBeltAuto
      @RustBeltAuto  5 месяцев назад

      The country? Greetings from the armpit of Minnesota.