I want to warn everyone who is thinking about doing this job by themself. It is NOT as easy as this video makes it seem to be. The whole bearing part is rusted/fused together with the backing plate and it’s a true pain to separate them. I tried the method of putting nuts & washers on the on the inside of the outer part of the bearing assembly and pressing against the back plate. But that only split the bearing in half. What ended up working was to remove the two parts together and place them on some planks on a concrete floor, then use a blow torch to heat it all up, then slamming the bearing assembly with a sledge hammer five or six times. This job took two days with trial and error. I recommend to just buy a new backing plate together with the wheel bearing assembly and replace them both. The backing plate will likely end up warped anyway using the method mentioned.
We cannot show all the nuances and problems during replacement; this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be carried out by specialized car services.
![How to change front wheel bearing on TOYOTA RAV4 II [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/CYTMmuRsHlQ/mqdefault.jpg)
![How to change front wheel bearing on TOYOTA RAV4 II [TUTORIAL AUTODOC]](/img/tr.png)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thanks, it's very helpful. from Timor Leste.
great video easy to follow thank you
I replaced it in 30 minutes and now no groan in the rear end
good job
Thank much
so this has back disk brakes and drum brakes or the drum brakes just for parking break im new sorry
It's a parking brake, not a drum brake.
Thank s🙏🙏🙏
What’s the torque on the bolts?
We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.
Please sent engine overll video
Would a 6 tonne press do that job ?
We do not have this information, we recommend that you consult with your mechanic.
Is this for 2wd or 4wd?
This is for 4wd.
I want to warn everyone who is thinking about doing this job by themself. It is NOT as easy as this video makes it seem to be. The whole bearing part is rusted/fused together with the backing plate and it’s a true pain to separate them. I tried the method of putting nuts & washers on the on the inside of the outer part of the bearing assembly and pressing against the back plate. But that only split the bearing in half.
What ended up working was to remove the two parts together and place them on some planks on a concrete floor, then use a blow torch to heat it all up, then slamming the bearing assembly with a sledge hammer five or six times. This job took two days with trial and error. I recommend to just buy a new backing plate together with the wheel bearing assembly and replace them both. The backing plate will likely end up warped anyway using the method mentioned.
We cannot show all the nuances and problems during replacement; this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be carried out by specialized car services.
Quit crying this video was cery helpful
How much in usd
We do not have this information.
Please follow our news on our channel.
You forgot to put the brake pads back on
At 4:26 in this video you see how the pads are installed.