Hi. Great video. I've got the loop core deluxe that comes with a 2 button pedal. But you cannot use button A to stop and set tempo and button B to choose track, as you do with your pedal. Is it possible to modify it to work as yours? would you be so kind to explain how? thanks!
Hello, what kind of button do you need? Momentary Normally closed and 6 or 3 contacts? I also saw some with only 2. Which contact should I use? Sorry I'm not electronics saavy.
u gots some tasty licks i just bought that switch very inspiring tuts 1& 2, i'm going to try to find tut 3 thanks a lot for your hard work and attention to to your viewers and fans ok peace out for know think i'll subscribe
so I'm guessing the stomp switch is dpdt momentary and stereo ouput jack for the DIY footswitch, only recently bought a looper pedal and so far only worked out how to put in wav files the rest will come thnx
great demo I'd like to prepare few phrases such as i 1. ntro, 2. song part 1, 3. chorus, 4. song part 2, 3. chorus, 5. solo, 6. end and let them play in a sequence from separate memory banks OR be able to move to the next phrase using that foot switch, preferably RIGHT move up LEFT move down can that be achieved with this foot switch? I saw someone using LEFT for up and DOUBLE TAP LEFT for down, I prefer LEFT down RIGHT up if possible and not to miss the perfect timing, would the next phrase play accordingly to the STOP selection? for example: select FINE STOP then tap LEFT for up during PLAY, but it should only move up when the current phrase finishes can it be done?
I dont mean to be so off topic but does any of you know a way to get back into an Instagram account..? I was dumb forgot my password. I appreciate any tips you can give me
@Gary Camden thanks for your reply. I found the site on google and Im waiting for the hacking stuff now. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
how did you wires the 2 switches and are they on the off or just on when your press and off when you press again need help iam trying to make one of these for my nux loop core as well
Kevys Rc & Music , hi if you scoll down in comments there is a link to my other video , in that video description is a link to a wiring diagram....basically you need 2 dpdt switches and a stereo jack......and a trs to trs lead...
Hi, the looper is advertised on some sites as true bypass. Do you know if that's true? Does bypass work while its turned off (no power)? That would at least rule out buffered bypass.
Exequiel Rodríguez , hi you will need 2x dpdt footswitches, a TRS 1/4" stereo jack socket. and a TRS to TRS cable.....the diagram is in the description...hope this helps,
Is the foootwitch is compatible with the Boss Fs6 or the Boss FS-5U?, I want to buy the Nux loop Core but here in Colombia it´s difficult to find Nux related products, I could only find the Loop core so if not I think I will have to buy the Boss Rc3 and spend the extra "pesos ($) " for a pedal that does the same
could this footswitch be used to scroll up and down the patches? I want to put backing organ sample chords in each patch to scroll through as the song progresses (shine on you crazy diamond) for my band. Many thanks and great demo! :)
hi yes you can (with the footswitch) you would pre -record all your loops, and make a note of which number loop is which. ....i do this on this demo. from 11:15. hope this helps. ruclips.net/video/PA9rgagb3dg/видео.html
tip: record a loop, and copy tat loop to all other patch numbers, to maintain the same 'tempo' then wipe then re-record the audio on each copied loop.....then they will all be the same tempo ok. cheers .
Right. I have the loop core deluxe, which came with a dual switch. When you plug in it seems to want to just go up/down presets when first plugged not properly tried it yet though
@@Millennial_Mike did you fix this? I also have the deluxe version, and the footswitch connected in position A-B only allows to go up loops (B) and go down loops (A). I would love to have button B to control loop number (one click up and 2 clicks down) while button A works for stopping and setting tempo
I know you said you'd put the link somewhere but can you help me out with which pedal you bought to go along side the loop pedal. I want to use your wiring diagram but want to make sure I buy the right pedal to do it with. Thanks.
So does this function the same way an RC3 does when it's connected to a footswitch? ie, you can more or less control everything through the foot switch?
Hi.... I am probably overlooking something simple but I cannot get a "seamless" loop with the Loop Core. I record a loop and hit the button for play back but after the loop is over that I recorded there is a pause. Eventually it starts playing the recording but then stops again after the phrase is over. Would appreciate any tips to get my loops to play continuously. PS- I am new to looping. Thanks
hi , there are 2 ways to record a loop....where it says "stop modes" this doubles as record modes too....before recording press this button twice , mode 1 is AR (auto record) ...meaning the red led will flash and will wait for you to play, and instantly record without pressing the footswitch.....mode 2 is NR which will start recording only when you press the footswitch.....in either mode as soon as you press the footswitch again it will loop.....hope this helps.
part 2. stop modes. the stop modes button gives various types of ending to your loops...once recorded....mode 1 ST instantly stops when foorswitch is pressed....mode 2 FN will play the loop to the end and stop when footswitch is pressed...even halfway through...mode 3 FA will fade out the loop when footswitch is pressed.....mode 2 is probably causing your issue.... :)
+Everett Teague I don't think its a stop mode issue but probably down to your own timing, I had the same problem when I started using a looper. Try running through the phrase three times; the first not recording then on the second time around press record, , then when you press stop at the end of the phrase keep playing the start of the phrase, that will help nail the loop start and end.
hey - i was looking at looper stuff on ebay and i ended up here ... i just got a mooer coean machine and while its flawed i am evjoying playing around with it . ther eis a volume drop on the looped when you engage the half speed which is a bummer but ... looking at maybe getting a looper ... something that DOESNT have these type of annoying issues prolly does not exsist or is way out of my price point .
hi petey, loopers are great, even the cheap 25-30 dollar ones are cool too....with overdubbing etc...but most cheapos will only record for 10 minutes...which is plenty realyy, and will not store loops either...my mate has a cheap 25-30, and hes very happy with it, search for the rowin, amoon etc.....
Can you use aux cord, to save backing tracks from youtube, with ur phone? . So save the backing track to nux, the play the guitar parts while backing track plays?
Danilo Cardia , hi it has a few options for playback, loop, or dead stop at the end of the loop, or it can fade out....the loop has to be saved first to do that....
I went the lazy route on the external switch and bought one from SaturnWorks :-) Wish we could SAVE loops with our feet.... that's really the only shortcoming of this device in my eyes.
+ambiguationdotnet it can be done, they are tiny tactile momentary switches, which could be replaced with momentary footswitches, but obviously the whole thing would have to be rehoused, but ALL switches could be used....might be a cool project in future...
hi, if you look in the desription of this video, i have put a link to a wiring diagram of how i built mine ok. ruclips.net/video/PA9rgagb3dg/видео.html
It would be cool to use the external switch to switch up and down through memory banks, enabling the possibility of switching between intro , verse chorus 😀👍 wonder if this is possible
hi yes this is possible....you have to pre record all 3, intro, verse, end..... the trick with this is to get the same tempo on each memory...........i have done this. heres how, record your first loop with chosen tempo....save to say number 1....then save this number 1 loop to loop to 2 more memories 2 and 3....then wipe the audio from the 2 and 3 and you will have the exact same tempo on all 3....then record on all 3...hope this helps.
DEADASTRONAUTFX cool thanks for the info, it certainly is a Swiss Army knife solution , a great songwriting notebook, thanks for your input, I am sure it will aid in my final purchase. Have a great weekend
Nice Vid! :) one question: Can you recorded two loops separately and play it at same time? For example: I recorded a Bass loop first. Then, I recorded a guitar solo in a different loop (not Overlapping). Can I play the bass loop and the guitar solo loop at same time?
+LightHouseShow hi, no , but here is what i do, i record a loop, then copy that loop to another number , then delete the audio on the copy this way you have the same tempo of both loops....and can switch seamlessly between both loops....hope this helps ya.
Thanks for answering. if possible, can you make a video showing even a short performance like this.Because sometimes, you want to stop the drum or the bass only in the middle of a song and then insert them again separately. This is possible with BOSS RC 500. but i cannot afford that.
+LightHouseShow hi, likd i said you could do this by copying the initial loop, lets say 3 times, loop1 with drums bass, loop 2 copy, remove drums, loop 3 copy remove bass....so as long as you copy you can remove or add to each copy, then swjtch between....obviously they would have to be prerecorded though....but you can still overdub on each copy too and save each loop....cheers
Mike Mike hi mike, its pretty smple, its a stereo jack socket and 2 switches (Normally closed) check this guys vid too.. ruclips.net/video/zep3m7Cviqg/видео.html
Nowere on the internet says what foot controller i can use to change phases on this loop pedal. Every foot controller i have tried doesnt change phase. I even purchased a handmade footswitch and didnt work. Im sik and tired of spending my money and time looking for a foot controller that actualy works with yhis pedal. Can someone please help me out?
The wiring diagram makes no sence to me. It doesnt state all the bits i need to buy and where i solder the wires?. I purchased an fs6 clone buy saturnworks and that didnt work
+thisisme if it was a 'proper' fs6 'clone' it should have toggle switches for both footswitches, this makes them either ''normally open'' or ''normally closed'' ...if they havent included those switches then it is not a clone....you have to use a ''stereo'' male to male lead....not mono.. the diagram i have put up shows that you need 2 dpdt switches, and a stereo jack socket....done.
+100roberthenry this is the response i get from saturnworks but im paralized... didnt know.. Thanks for your inquiry. If the NUX Loop Core it's built to the same specs as the Boss pedal, our controller should work. Boss uses normally closed momentary controllers while most other brands use normally open momentary controllers. You may want to verify whether your device uses normally open or normally closed switches. The default setup for my pedals is normally closed, but I can set it up as normally open as well. Bryan __________________ can you help me out. many thanks!
+Jorge Villa , ok open up your footswitch....each switch will have 6 poles.....there will be a wire going to the middle of each switch.....leave them there ok.....now ther will be another wire on each switch to at the top or bottom of those switches......swap those wires over from where they are, to the opposite end....this should sort it ok.
@@jaco1329 you can get very cheap ones like 'amoon'/rowin' etc that will loop for 10 minutes, however you cannot save the loops....i wanted to save/upload backing tracks so i got this one....have fun.
What box is best to build it with, I've been trying to decifer what the box is your using in the video but can't get the clarity in screenshots to identify it, is any two switch footswitch OK, or is there at better one you can recommend for the build
@@craigpons7153 hi the box i used is a hammong 1590b style.....the switches are DPDT footswitches.... you will need a stereo jack, and a stereo to stereo 1'4'' lead..... list of parts: 1x 1590b style enclosure 2 x dpdt footswitches 2x 1/4' mono jack sockets 1x stereo 1'4'' jack socket and of course the stereo to stereo 1/4'' cable.... hope this helps. rob .
Muy bien como lo usas el pedal yo tengo ese mismo pedal tambn. Algo q no me gusta del pedal es q no se puede cambiar el tempo de los loops d bateria a la velocidad a uno quiera. Saludos muy buen trabajo
![NUX Loop Core Stereo Looper || VIDEO REVIEW TUTORIAL [NO TALK]](http://i.ytimg.com/vi/hFSDQDLiEpA/mqdefault.jpg)
Brilliant bit of playing and layering!
thanks for the whisky tip on the wiring diagram for the switch, I passed out but it was worth it hahahah. now seriously, thanks!
Hello. Very good tutorial! What kind of footswitch do you use in the video? Could you tell me the model?
Sweet! I was able to build this switch and it works just like your demo. Thanks!
Doogie Ball , cool, much more useful eh...nice one.
Hi. Great video. I've got the loop core deluxe that comes with a 2 button pedal. But you cannot use button A to stop and set tempo and button B to choose track, as you do with your pedal. Is it possible to modify it to work as yours? would you be so kind to explain how? thanks!
Fantastic playing and looping
Works a treat. Would be great if you could post the circuit 100roberthenry
Hello, what kind of button do you need? Momentary Normally closed and 6 or 3 contacts? I also saw some with only 2. Which contact should I use? Sorry I'm not electronics saavy.
u gots some tasty licks i just bought that switch very inspiring tuts 1& 2, i'm going to try to find tut 3 thanks a lot for your hard work and attention to to your viewers and fans ok peace out for know think i'll subscribe
so I'm guessing the stomp switch is dpdt momentary and stereo ouput jack for the DIY footswitch, only recently bought a looper pedal and so far only worked out how to put in wav files the rest will come
thnx
great demo
I'd like to prepare few phrases such as i
1. ntro,
2. song part 1,
3. chorus,
4. song part 2,
3. chorus,
5. solo,
6. end
and let them play in a sequence from separate memory banks OR
be able to move to the next phrase using that foot switch, preferably
RIGHT move up
LEFT move down
can that be achieved with this foot switch?
I saw someone using LEFT for up and DOUBLE TAP LEFT for down, I prefer LEFT down RIGHT up if possible
and not to miss the perfect timing, would the next phrase play accordingly to the STOP selection?
for example: select FINE STOP
then tap LEFT for up during PLAY, but it should only move up when the current phrase finishes
can it be done?
the pedal waits till the end of the frase to change banks so all you have to do is select it before hand
phrase*
Thanks for your replies. Can you save on the fly without stopping the track?
great videos on the NUX Loop core, awesome playing too, subbed :)
I dont mean to be so off topic but does any of you know a way to get back into an Instagram account..?
I was dumb forgot my password. I appreciate any tips you can give me
@Milan Jamari instablaster =)
@Gary Camden thanks for your reply. I found the site on google and Im waiting for the hacking stuff now.
Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
@Gary Camden it worked and I now got access to my account again. Im so happy:D
Thanks so much you really help me out :D
@Milan Jamari you are welcome :)
Love your stuff. You're not a man of many words but it works fu me!
Con Petropoulos lol...thanks .
how did you wires the 2 switches and are they on the off or just on when your press and off when you press again need help iam trying to make one of these for my nux loop core as well
Kevys Rc & Music , hi if you scoll down in comments there is a link to my other video , in that video description is a link to a wiring diagram....basically you need 2 dpdt switches and a stereo jack......and a trs to trs lead...
Can you use two loopers and record by pressing just one?
Do you always have to double tick to go down on the channel or can you hold right switch down like the RC3? Cheers!
Con Petropoulos , hi yes have to double click....
Hi, the looper is advertised on some sites as true bypass. Do you know if that's true? Does bypass work while its turned off (no power)? That would at least rule out buffered bypass.
good point, as the output jack has to be in to power it up, i would say no, and that it must be a buffered bypass....so no, it is not true bypass imo.
Hi! Could you tell me what kind of jack and switches i need to build one like this?
Exequiel Rodríguez , hi you will need 2x dpdt footswitches, a TRS 1/4" stereo jack socket. and a TRS to TRS cable.....the diagram is in the description...hope this helps,
Is the foootwitch is compatible with the Boss Fs6 or the Boss FS-5U?, I want to buy the Nux loop Core but here in Colombia it´s difficult to find Nux related products, I could only find the Loop core so if not I think I will have to buy the Boss Rc3 and spend the extra "pesos ($) " for a pedal that does the same
Hi, the fs6 will be fine...
could this footswitch be used to scroll up and down the patches? I want to put backing organ sample chords in each patch to scroll through as the song progresses (shine on you crazy diamond) for my band. Many thanks and great demo! :)
hi yes you can (with the footswitch) you would pre -record all your loops, and make a note of which number loop is which. ....i do this on this demo. from 11:15. hope this helps. ruclips.net/video/PA9rgagb3dg/видео.html
tip: record a loop, and copy tat loop to all other patch numbers, to maintain the same 'tempo' then wipe then re-record the audio on each copied loop.....then they will all be the same tempo ok. cheers .
Hi!
Do you think a Fender Mustang 2 button footswitch is suitable for it?
Psycho0212 hi. not sure of the wiring on those...basically you need 2 don't foots witches and a stereo Trust jack socket..
and what about theKorg ps3 sustain pedal?
How do you set up the switch to do this? I'm assuming you need to hold down certain buttons while it powers on?
Hi, no, you just plug it in and it recognises the footswitches, see in description for the wiring diagram ,
Right. I have the loop core deluxe, which came with a dual switch. When you plug in it seems to want to just go up/down presets when first plugged not properly tried it yet though
@@Millennial_Mike did you fix this? I also have the deluxe version, and the footswitch connected in position A-B only allows to go up loops (B) and go down loops (A). I would love to have button B to control loop number (one click up and 2 clicks down) while button A works for stopping and setting tempo
Any existing switches already wired this way?
Boss fs6....
Hi man, thanks for the video
can you tell me please what kind of cable you use for the double switcher in the video TS or TRS (mono or stereo ?
Ronen Avital hi, yep its a TRS , stereo. same as the cable which is also stereo.. cheers
Thank you
good work
keep musicing :)
Ronen Avital , musicing, thats my word of the day lol......yep, the footswitch is essential....
I know you said you'd put the link somewhere but can you help me out with which pedal you bought to go along side the loop pedal. I want to use your wiring diagram but want to make sure I buy the right pedal to do it with. Thanks.
Will this one work? www.amazon.co.uk/BOSS-FS-6-Boss-Dual-Footswitch/dp/B000OY707S
yes the boss fs6 will work....
Ace thanks :-)
+GuitaristOnWheels no problem, glad to help another lefty... ;)
So does this function the same way an RC3 does when it's connected to a footswitch? ie, you can more or less control everything through the foot switch?
Montel Killman . Yes.... but not everything...tempo. stop. Start. Up. Down...
thanks for the reply! your video convinced me to get one! (that, plus I can't afford an RC3 after paying my rent waaaaaah)
Montel Killman . No probs....yeah a lot cheaper. And 6 hours record time...never had any issues with mine 2 years on.....
Hi.... I am probably overlooking something simple but I cannot get a "seamless" loop with the Loop Core. I record a loop and hit the button for play back but after the loop is over that I recorded there is a pause. Eventually it starts playing the recording but then stops again after the phrase is over. Would appreciate any tips to get my loops to play continuously. PS- I am new to looping. Thanks
hi , there are 2 ways to record a loop....where it says "stop modes" this doubles as record modes too....before recording press this button twice , mode 1 is AR (auto record) ...meaning the red led will flash and will wait for you to play, and instantly record without pressing the footswitch.....mode 2 is NR which will start recording only when you press the footswitch.....in either mode as soon as you press the footswitch again it will loop.....hope this helps.
part 2. stop modes. the stop modes button gives various types of ending to your loops...once recorded....mode 1 ST instantly stops when foorswitch is pressed....mode 2 FN will play the loop to the end and stop when footswitch is pressed...even halfway through...mode 3 FA will fade out the loop when footswitch is pressed.....mode 2 is probably causing your issue.... :)
+Everett Teague
I don't think its a stop mode issue but probably down to your own timing, I had the same problem when I started using a looper. Try running through the phrase three times; the first not recording then on the second time around press record, , then when you press stop at the end of the phrase keep playing the start of the phrase, that will help nail the loop start and end.
hey - i was looking at looper stuff on ebay and i ended up here ... i just got a mooer coean machine and while its flawed i am evjoying playing around with it . ther eis a volume drop on the looped when you engage the half speed which is a bummer but ... looking at maybe getting a looper ... something that DOESNT have these type of annoying issues prolly does not exsist or is way out of my price point .
hi petey, loopers are great, even the cheap 25-30 dollar ones are cool too....with overdubbing etc...but most cheapos will only record for 10 minutes...which is plenty realyy, and will not store loops either...my mate has a cheap 25-30, and hes very happy with it, search for the rowin, amoon etc.....
Can you use aux cord, to save backing tracks from youtube, with ur phone? . So save the backing track to nux, the play the guitar parts while backing track plays?
Yes you can record stereo in live, then save, then jam....
@@100roberthenry thanks for advice, so this is like boss rc-3 clone? I have a rc-3 now, i was thinking of selling it and bying this nux one 😊
@@tonis5637 yes, but this has 99 loops, and 6 hours record time....much better.
What brand control switch is that?
Can this pedal play just a phrase? Instead of looping what I recorded, play just one time. Is this possible?
Danilo Cardia , hi it has a few options for playback, loop, or dead stop at the end of the loop, or it can fade out....the loop has to be saved first to do that....
Thank you!
NOTE; IF YOU WANT A REPLY, TURN ON YOUR REPLY OPTION IN YOUR RUclips CHANNEL....otherwise i cannot reply to you ok . cheers
Hey, used 9 pin switches or normal SPST 2 leg switches?
+- Ryz DPDT...
Oh, ok, it need to be "closed" at the beginning. And the jack socket need to be stereo, am i right?
+- Ryz YEP, closed, and stereo jack socket?lead.. have fun.
I went the lazy route on the external switch and bought one from SaturnWorks :-) Wish we could SAVE loops with our feet.... that's really the only shortcoming of this device in my eyes.
open it up and hack another footswitch onto it ... :)
if I knew how, and if I was brave enough, I certainly would!! :)
+ambiguationdotnet it can be done, they are tiny tactile momentary switches, which could be replaced with momentary footswitches, but obviously the whole thing would have to be rehoused, but ALL switches could be used....might be a cool project in future...
Great Demo!!. Do you have any idea how to make a Digitech fs3x foot switch work with the nux loop.
hi, if you look in the desription of this video, i have put a link to a wiring diagram of how i built mine ok. ruclips.net/video/PA9rgagb3dg/видео.html
is your loop core still working?? i heard that nux produces great stuffs, but most of them stop working after several months
Ikram Maududi . hi mine still works fine....no problems...
It would be cool to use the external switch to switch up and down through memory banks, enabling the possibility of switching between intro , verse chorus 😀👍 wonder if this is possible
hi yes this is possible....you have to pre record all 3, intro, verse, end..... the trick with this is to get the same tempo on each memory...........i have done this. heres how, record your first loop with chosen tempo....save to say number 1....then save this number 1 loop to loop to 2 more memories 2 and 3....then wipe the audio from the 2 and 3 and you will have the exact same tempo on all 3....then record on all 3...hope this helps.
DEADASTRONAUTFX cool thanks for the info, it certainly is a Swiss Army knife solution , a great songwriting notebook, thanks for your input, I am sure it will aid in my final purchase. Have a great weekend
@@Havanacuba1985 no probs man.....have fun. great lil units for the price...
Thanks for the video.
Is it doesnt matter if the dpdt switch reversed? I mean the pin number.
Romi Drift , if i recall it was normally open and normaly closed.....test with croc clips. ..cheers.
It's working dude... Hehehe.. the stop button connect to NC (normally closed) and the other one is NO (normally open)... Thanks.. Cheers....
Romi Drift yay....good work man..
Nice track you made there! So, is the Nux STILL working?
vKarl71 . Yep still going strong...no probs.
Nice Vid! :)
one question:
Can you recorded two loops separately and play it at same time?
For example: I recorded a Bass loop first. Then, I recorded a guitar solo in a different loop (not Overlapping).
Can I play the bass loop and the guitar solo loop at same time?
Good question! I also would like to know if it is possible to do that , then you could stop either the pass and keep the drum of vice versa!
+LightHouseShow hi, no , but here is what i do, i record a loop, then copy that loop to another number , then delete the audio on the copy this way you have the same tempo of both loops....and can switch seamlessly between both loops....hope this helps ya.
Thanks for answering. if possible, can you make a video showing even a short performance like this.Because sometimes, you want to stop the drum or the bass only in the middle of a song and then insert them again separately. This is possible with BOSS RC 500. but i cannot afford that.
+LightHouseShow hi, likd i said you could do this by copying the initial loop, lets say 3 times, loop1 with drums bass, loop 2 copy, remove drums, loop 3 copy remove bass....so as long as you copy you can remove or add to each copy, then swjtch between....obviously they would have to be prerecorded though....but you can still overdub on each copy too and save each loop....cheers
are you using a stereo cable?
hi yes its a TRS to TRS cable..
DEADASTRONAUTFX thank you!!
Where can I get a Footswitch to go up and down with the presets on the Nux ?
if you look in my other nux video there is a link to build one...or you can buy a boss fs6....
thanks! I tried my fs6 it banks up and down I guess I will use it for now,but I was curious if the digitech Fs3x would work also ?
+Guy Man (evelskunny71) cool it works, no idea on the digitech though....as long as they both have the options of NC NO..i guess it might be ok...
would the boss rc-7 work as well?
+James Sommer no idea...the fs6 will...
Does the boss fx-7 footswitch work as well?
Boss FS-7. I'm trying to figure that out too...
Samos12 , hi not sure on the fs7, but the fs6 will work.
How to get the doit yourself switch ?
on my other video is a link in the description to build one....
Hey) this is stereo cable?
yep... :)
DEADASTRONAUTFX thanks, man)
Is part 1 still online? can not find it..
yes, its called , NUX LOOP CORE cheapo boss rc3....there is a part 3 too, on how to import wav files...
Great! Thanks!
Hi n-n/ can you give the circuit of that footswitch pls, i'll appreciate that
Hi there, great demo, could you please post the circuit?, I saw the diagram on your other video but I just don't get it, thanks, :D
Mike Mike hi mike, its pretty smple, its a stereo jack socket and 2 switches (Normally closed)
check this guys vid too..
ruclips.net/video/zep3m7Cviqg/видео.html
Nowere on the internet says what foot controller i can use to change phases on this loop pedal. Every foot controller i have tried doesnt change phase. I even purchased a handmade footswitch and didnt work. Im sik and tired of spending my money and time looking for a foot controller that actualy works with yhis pedal. Can someone please help me out?
+thisisme if you get the boss fs6 it will work......
+thisisme if you go to my other nux loop vid it has a wiring diagram for the footswitch in the description ok...
The wiring diagram makes no sence to me. It doesnt state all the bits i need to buy and where i solder the wires?. I purchased an fs6 clone buy saturnworks and that didnt work
+thisisme if it was a 'proper' fs6 'clone' it should have toggle switches for both footswitches, this makes them either ''normally open'' or ''normally closed'' ...if they havent included those switches then it is not a clone....you have to use a ''stereo'' male to male lead....not mono.. the diagram i have put up shows that you need 2 dpdt switches, and a stereo jack socket....done.
+thisisme are you sure your using a stereo lead???
Good vid bud. I wanna hook up the two wtb-004 pedals. Should I just do the same?...
+Ned Flanders sorry, what do you mean?...
yeah, you just need a Y splitting cable, you can do the same thing
wtb-oo4 are those keyboard sustain pedals. You can use those also with the ctrl in port, but if you want two you need a Y splitter
would it work on boss rc-3?
hi, im not suree with the rc3....checkout a vid called , build your own boss fs6 footswitch.,.
+100roberthenry this is the response i get from saturnworks but im paralized... didnt know..
Thanks for your inquiry. If the NUX Loop Core it's built to the same specs as the Boss pedal, our controller should work. Boss uses normally closed momentary controllers while most other brands use normally open momentary controllers. You may want to verify whether your device uses normally open or normally closed switches. The default setup for my pedals is normally closed, but I can set it up as normally open as well.
Bryan
__________________ can you help me out. many thanks!
+Jorge Villa , ok open up your footswitch....each switch will have 6 poles.....there will be a wire going to the middle of each switch.....leave them there ok.....now ther will be another wire on each switch to at the top or bottom of those switches......swap those wires over from where they are, to the opposite end....this should sort it ok.
Thank you for your vidéo lol
you welcome :)
I would like to buy a looper not too expensif, do you think the Nux loop core is a good deal for me ?
@@jaco1329 you can get very cheap ones like 'amoon'/rowin' etc that will loop for 10 minutes, however you cannot save the loops....i wanted to save/upload backing tracks so i got this one....have fun.
DEADASTRONAUTFX : Thank you very much
@@jaco1329 no problem, checkout the amoon ap-09, very cheap.
That is unreal, I've just bought a nux loop core and that footswitch would be very handy, what brand is the switch please mate, killer video
Hi man. I built the switch box myself. There should be a link to a diagram in the description of this or my other video...cheers
Thanks mate, I got the circuitry plans, but could you recommend a actual pedal to purchase that would be good to do the build with
@@craigpons7153 . Hi sorry. You mean what box to get to build it with?...or a completed build?..
What box is best to build it with, I've been trying to decifer what the box is your using in the video but can't get the clarity in screenshots to identify it, is any two switch footswitch OK, or is there at better one you can recommend for the build
@@craigpons7153 hi the box i used is a hammong 1590b style.....the switches are DPDT footswitches.... you will need a stereo jack, and a stereo to stereo 1'4'' lead.....
list of parts:
1x 1590b style enclosure
2 x dpdt footswitches
2x 1/4' mono jack sockets
1x stereo 1'4'' jack socket
and of course the stereo to stereo 1/4'' cable....
hope this helps. rob .
Muy bien como lo usas el pedal yo tengo ese mismo pedal tambn. Algo q no me gusta del pedal es q no se puede cambiar el tempo de los loops d bateria a la velocidad a uno quiera. Saludos muy buen trabajo
Si se puede.Ajustas la velocidad con el tap tempo.
ruclips.net/video/44XH9ni_LTc/видео.html