How to install a wall mount and charger for your dyson hand held vacuum

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024
  • ХоббиХобби

Комментарии • 182

  • @jackielurie7190
    @jackielurie7190 2 года назад +13

    THANK YOU! You explained how to do the install clearly and without a lot of personal banter... some people get caught up in hearing themselves talk rather than cutting to the chase and helping us non-handy people out! BIG THUMBS UP!

    • @TomLeeman
      @TomLeeman  2 года назад +1

      I try to get to the point thanks for watching

  • @skudlugs
    @skudlugs 4 года назад +50

    Big shout out to Dyson for having this in the instructions that came with the vacuum ........NOT ! ! Thanks Tom

    • @TomLeeman
      @TomLeeman  4 года назад

      I know right why don't they?

    • @nexuspena7448
      @nexuspena7448 3 года назад

      My v7 has it.

    • @MT-wo5fs
      @MT-wo5fs Год назад

      I second that! No directions and even the website scan was invalid-nice intro to Dyson. My question is for Tom or anyone else. Do the screws need to be drilled into studs or will the dry wall be sufficient enough to hold? It appears drywall. Can you use a hand held screw driver or do you need a drill?

    • @siobhansquigs
      @siobhansquigs 3 месяца назад

      Great video! I couldn’t find one that was clear until I found yours. Thank you!

  • @robertl.4675
    @robertl.4675 Год назад +3

    Definitely the best Dyson wall mount installation instructions on RUclips. Thank you for sharing with the world!

    • @TomLeeman
      @TomLeeman  Год назад

      I appreciate those kind words. Thanks for watching and enjoy your new Dyson.

  • @drisscammoun7959
    @drisscammoun7959 3 месяца назад +2

    You have the talent to explain with clarity.

    • @TomLeeman
      @TomLeeman  3 месяца назад

      Thank you I appreciate that and good luck on your installation thanks for watching

  • @healthyeating4682
    @healthyeating4682 3 года назад +6

    The best video on how to install a wall mount for Dyson. I gave him 100 out of 100.

    • @TomLeeman
      @TomLeeman  3 года назад

      thanks and thanks for watching I don't know why they make it so difficult but we did it right!

  • @CongressRental
    @CongressRental 3 месяца назад +1

    You are genius. The only person to explain the cable path. Thanks so much

    • @TomLeeman
      @TomLeeman  3 месяца назад

      Wow, thanks! Enjoy your Dyson

  • @papatyasol781
    @papatyasol781 2 года назад +1

    Everyone said Dyson wall mount and showed how it pierced the wall. You explained in detail how to place the charging cable and charging port 🤩 Thank you very much, exactly the video I was looking for👏.

    • @TomLeeman
      @TomLeeman  2 года назад

      Glad I could help it’s that very intuitive how you do that it took me a while to figure it out and we didn’t have the explanation in the directions glad I could help again thanks for watching

  • @tiay3162
    @tiay3162 4 года назад +9

    Thank you for this video-for the life of me, I couldn’t figure out how to fit the charging piece in until you showed to open it first!!

    • @TomLeeman
      @TomLeeman  4 года назад

      You are welcome! they don't make it easy do they

  • @andrewspeed9118
    @andrewspeed9118 4 года назад +9

    Great video, straight to the point and clearly explained. Thank you 😀

    • @TomLeeman
      @TomLeeman  4 года назад

      Thanks they don't make it easy

  • @yd2535
    @yd2535 Год назад +2

    Great video, followed your instructions, went perfectly. Thank you!!

    • @TomLeeman
      @TomLeeman  Год назад

      Glad I could help. Good luck on that install and thanks a lot for watching.

  • @pampalmer1732
    @pampalmer1732 3 года назад +2

    Thank you! There is no way I would have figured that out from the instructions. This video was what I needed!

    • @TomLeeman
      @TomLeeman  3 года назад

      I know the directions don’t really give you good directions thanks for watching

  • @mariamrom25
    @mariamrom25 4 года назад +5

    OMG !!, thank you so much for this video, very well explained. You go right into the the topic, I've been looking for instructions on this installation but none like yours.
    Thanks again !

    • @TomLeeman
      @TomLeeman  4 года назад

      Glad it was helpful!

  • @denisemc607
    @denisemc607 2 года назад +1

    Thanks so much for the detailed video of putting the plug in the dock. I liked how you hung the long bit to the size to use the wall space you have super clear and simple super duper 🥳

    • @TomLeeman
      @TomLeeman  2 года назад +1

      Thank you and thanks for the comments I don’t know why Dyson doesn’t give you clear directions in their instructions but this one was a definite puzzle but we got it figured out thanks for watching

    • @denisemc607
      @denisemc607 2 года назад

      @@TomLeeman hi it seems they don’t want to print multiple languages and use icons/Ikea argggg mine also is without a face plate which many had… very confusing 🤣

  • @teddythodo3302
    @teddythodo3302 3 года назад +1

    Lol if it wasn’t for your video I would have never did this. I didn’t know you needed to push the charger so hard up the little nozzle tube for your charger. Thank you

    • @TomLeeman
      @TomLeeman  3 года назад

      You’re welcome I don’t know why they don’t put in the proper directions for this it’s not very intuitive good luck and thanks for watching

  • @antonios4926
    @antonios4926 Год назад +1

    Many thanks for the video. I way scratching my head. From Cyprus

    • @TomLeeman
      @TomLeeman  Год назад

      Good luck on your install and thanks for watching

  • @grahamclark9010
    @grahamclark9010 3 года назад +2

    So helpful since an otherwise useful product fails to explain clearly what you managed to demonstrate. Cheers!

    • @TomLeeman
      @TomLeeman  3 года назад

      You're welcome! Thanks for watching!

  • @drisscammoun7959
    @drisscammoun7959 3 месяца назад +1

    Thank you so much you saved my evening

    • @TomLeeman
      @TomLeeman  3 месяца назад

      Glad I could help

  • @brianmoseley179
    @brianmoseley179 Год назад +2

    Yep, I had it upside down. Makes a lot more sense now 😂

    • @TomLeeman
      @TomLeeman  Год назад

      Yeah, that probably wouldn’t work upside down. Good luck on your install.

  • @alkintugsal7563
    @alkintugsal7563 3 года назад +2

    Thank you the best explanation on RUclips.

    • @TomLeeman
      @TomLeeman  3 года назад +1

      You are welcome and thanks for watching

  • @withlovefrom_TX
    @withlovefrom_TX 3 года назад +1

    Thank you! the instructions were really hard to follow!

    • @TomLeeman
      @TomLeeman  3 года назад +1

      I know I don’t understand why they don’t make it clear or have a website that you can go to and to figure it out thanks for watching

  • @annhan777
    @annhan777 2 года назад +1

    Thanks!!!
    I haven’t bought one yet but I’m planning to. I just don’t know where I’m going to put it. How much space does it need to be away from the wall? I’m thinking I could potentially put it behind a door… But I may not have enough space. I’d sure like to know how much space is needed for the Dyson docking station

    • @TomLeeman
      @TomLeeman  2 года назад +1

      Once you put the vacuum and it sticks out about it, I would say eight or 9 inches so you gonna need some space

    • @annhan777
      @annhan777 2 года назад

      Thanks for your reply… actually I noticed in your video that you mounted your docking station close to your washing machine. And then you hung up the wand beside it. I am going to do exactly that. The only difference is that I will hang up the wand in another location close by. Thanks for your help! This made my life so much easier.

  • @taobryant1524
    @taobryant1524 4 года назад +1

    great video. just fitted my charging dock into garage wall as instructed. Thx.

  • @maddiewaldrop1962
    @maddiewaldrop1962 5 месяцев назад +1

    Awesome video! Question - how did you know how big of a hole to make for the anchors? Sorry if that’s a dumb question, just moved into my first apartment!

    • @TomLeeman
      @TomLeeman  5 месяцев назад +1

      I just look for a bit that was about the same size and just kinda like eyeballed it and then use that bit or drill. Thanks for watching.

  • @rmalacas
    @rmalacas 3 года назад +1

    Omgosh thank you so much! I totally was going to screw it on the wall and have the cord hang from the side haha

    • @TomLeeman
      @TomLeeman  3 года назад

      ur welcome thanks for watching

  • @noodlen.9779
    @noodlen.9779 4 года назад +4

    Thank you. I was stuck at this step.

    • @TomLeeman
      @TomLeeman  4 года назад +1

      My pleasure they don’t make it easy

  • @giovannacruzfritsch6789
    @giovannacruzfritsch6789 10 месяцев назад +1

    Amazing explanation. Thank you

    • @TomLeeman
      @TomLeeman  10 месяцев назад

      You are welcome! Thanks for watching

  • @MT-wo5fs
    @MT-wo5fs Год назад +1

    Thanks for the gr8 detailed video Tom. Do you need to screw into studs or is the drywall sufficient? It appears like the drywall will hold since you didn't mention anything about finding the studs. Since it is just drywall, can you use a hand held screw driver or do you need a drill? That is a good idea to mount it in the laundry room with just the base. The Dyson video show the mount with the entire leg attached to the mount on the wall. That is nice bcuz everything is all together, however, it takes up more space and it's not as easy to mount it next to an outlet in a more confined space like next to a washer or dryer. You could fit the charging base next to an outlet better with only having the base mounted and I guess just store the leg somewhere else.

    • @TomLeeman
      @TomLeeman  Год назад

      I had a stud right behind the screws so it went right into the wood which you know really liked it down. Otherwise you could use anchors in the drywall. Good luck. Thanks for watching.

    • @MT-wo5fs
      @MT-wo5fs Год назад +1

      @@TomLeeman Thanks

    • @TomLeeman
      @TomLeeman  Год назад

      @@MT-wo5fs my pleasure thanks for watching

  • @claudiaayala9654
    @claudiaayala9654 Год назад

    Thank you for the video. What screws do you recommend to use?

    • @TomLeeman
      @TomLeeman  Год назад

      I think I used drywall screws

  • @mike_js2936
    @mike_js2936 6 месяцев назад +2

    They need a link to this video on the actual Dyson manual because their video was 💩. Thank you sir!

    • @TomLeeman
      @TomLeeman  6 месяцев назад

      Thanks I appreciate that. Good luck with your Dyson and thanks for watching.

  • @emsguybob
    @emsguybob 11 месяцев назад +1

    Thanks so much for this!

    • @TomLeeman
      @TomLeeman  11 месяцев назад +1

      You're so welcome!

  • @jordannabanana
    @jordannabanana Год назад +2

    Looking for some advice:
    With a wireless vacuum, would you install the mount high enough for the vacuum to be resting solely on the mount, or would it be best to have the base of the vacuum resting on the floor to take some of the weight off the mount? My bf just installed our mount but it's high up enough the vacuum isn't touching the ground and all its weight relies on the mount. I am pretty nervous about it falling because I have a cat. I have been watching countless videos and searching Google but haven't found an answer yet. Is there anyone who could give some advice, or suggest an additional way to secure it as I'm not sure if this mount required double sided tape and if so-I would assume it can't be re-mounted with out it...

    • @TomLeeman
      @TomLeeman  Год назад +1

      If you screwed it into a stud or a 2 x 4 in your wall it’ll be fine we made additional hook to hold our long, vacuum wand and head but you can do it the way you did it you just Gotta make sure that it is firmly attached to the wall Good luck thanks for watching.

  • @janellemauldin
    @janellemauldin Год назад +1

    Great video although I wish someone would discuss how to find a stud in a wall and even making initial hole and what anchors even are 😔

    • @TomLeeman
      @TomLeeman  Год назад +1

      You can buy stud finders cheap on amazon amzn.to/3rqPatP

  • @harrybosch8972
    @harrybosch8972 4 года назад +2

    Nice little setup.

  • @claudiaiman4636
    @claudiaiman4636 3 года назад +1

    Thank you very much for this video ! 👍👍👍

  • @sammooz3210
    @sammooz3210 3 года назад +1

    Thanks Tom, great video.. My V-8 came with studs (as you used) and screws. Is it really necessary to use the studs if I am screwing into a stud? Thanks in advance.

    • @TomLeeman
      @TomLeeman  3 года назад +1

      If you’re screwing it directly in the wood it should hold and you shouldn’t need the anchors good luck and enjoy your Dyson thanks for watching

  • @jenniferim401
    @jenniferim401 3 дня назад +1

    Where can I find the red attachment on wall ? And what is it called! I want to buy one.

    • @TomLeeman
      @TomLeeman  2 дня назад

      I just bought that at Home Depot. It was like something that you would hang a rake or a shovel on. They have them on that one aisle. Good luck thanks for watching.

  • @saraycheco1843
    @saraycheco1843 3 года назад +1

    Thank you for the great instructions!!

  • @ismahanel.7097
    @ismahanel.7097 3 года назад +1

    Thank you from France 👌🏽

    • @TomLeeman
      @TomLeeman  3 года назад +1

      Welcome! thanks for watching!

  • @richardbachmann6689
    @richardbachmann6689 3 года назад +1

    Well done, brilliant video, thanks

  • @galecopp5578
    @galecopp5578 4 года назад +2

    Thank you for this video!

  • @radreviews4314
    @radreviews4314 Год назад +1

    Should I use a longer screw or shorter

    • @TomLeeman
      @TomLeeman  Год назад

      If you’re going into a 2 x 4 you just need to get about an inch and a half maybe two

  • @jessicaboddicker4985
    @jessicaboddicker4985 2 года назад +1

    you are a gem. thank you.

    • @TomLeeman
      @TomLeeman  2 года назад

      Glad I could help. Enjoy your Dyson.

  • @valeriemallett5833
    @valeriemallett5833 4 года назад +3

    Thank you. You saved a marriage

  • @andrewhorler9626
    @andrewhorler9626 Год назад +1

    Where did you buy your wall anchor (red) from? I need this for some of the other components. Great video!

    • @TomLeeman
      @TomLeeman  Год назад

      You can get them at Home Depot or Walmart

  • @Paincakes
    @Paincakes 4 года назад +1

    Thanks for the video. Do you recall if the screws were provided with the vacuum?

    • @TomLeeman
      @TomLeeman  4 года назад

      I don’t remember to tell you the truth but I do know I use my own

    • @philipohanlon2106
      @philipohanlon2106 4 года назад +1

      I just got a Dyson and got no screws with mine , surely they should give you the right screws??

    • @MihalsSapovalovs
      @MihalsSapovalovs 3 года назад

      Sadly no anchors, no screws & no instruction / recommendation about the wall mount installation :/

    • @silnavarrete1596
      @silnavarrete1596 3 года назад

      @@MihalsSapovalovs Hi! I truly thought mine came without screws and anchors!!! Until recently I found that they are taped to the back of the wall mount! I don’t know how the baggie camouflaged into it 😅😅 double check your screws aren’t inside a little bag taped to the back of the grey wall anchor!! I hope yours were included!!

  • @nefitru
    @nefitru Год назад +1

    Can I set up this dock on a wood closet? Do I still need anchors for it?

    • @TomLeeman
      @TomLeeman  Год назад +1

      You’re screwed directly in the world you should be fine you’re really don’t need to anchors if you do that

    • @nefitru
      @nefitru Год назад

      @@TomLeeman it worked, thank you

  • @JustStarcraft2
    @JustStarcraft2 4 года назад +1

    Thank you. I was looking to buy this exact wall mount from eBay. Do you know if this will fit with my DC34? The eBay listing doesn't include my DC34 model in the compatibility list, but the DC34 looks almost the exact same as the V6 V7 V8.

    • @TomLeeman
      @TomLeeman  4 года назад

      check the measurement on the port for charging

  • @tessmarie2685
    @tessmarie2685 4 года назад +1

    thank you very much for this video.

    • @TomLeeman
      @TomLeeman  4 года назад

      Ur r welcome it was a little tricky but doable

  • @gearoiddom
    @gearoiddom 3 года назад +1

    Were screws/rawlplugs included for you guys? I couldn't find them.

    • @TomLeeman
      @TomLeeman  3 года назад

      I just use screws that I have in the garage and tried to find a stud good luck thanks for watching

  • @randyfoster1326
    @randyfoster1326 3 года назад +1

    Lost the screws in my move and I don't want to take the mount to the hardware store. What size screws did you use? All my inventory screws are too fat.

    • @TomLeeman
      @TomLeeman  3 года назад +1

      I used drywall screws inch and a half maybe

  • @greg6509
    @greg6509 3 года назад +1

    Yeah the actual drilling of the holes and what to use and what is an anchor, etc...is what is needed

    • @TomLeeman
      @TomLeeman  3 года назад +1

      I used drywall screws had studs

    • @greg6509
      @greg6509 3 года назад

      @@TomLeeman Thank you. What size/kind drywall screws and how big drill bit?

  • @2011Badrul
    @2011Badrul 3 года назад +1

    Mine was screws missing. Called Dyson but sent me much smaller screws. Did you buy screws sperately?

    • @TomLeeman
      @TomLeeman  3 года назад

      I used screws and anchors that I had not the ones that came with

  • @mikea8294
    @mikea8294 4 года назад +2

    I installed the wall mount for my Dyson V11 Torque Drive vacuum using just the screws and not the anchors. However, there is no stud behind the wall and while I am able to mount the canister and a small tool, the top of the mount is just a tad away from the wall. I am concerned about whether this will hold. Has anyone else installed a wall mount without the anchors/stud and was the wall mount able to adhere to the wall and not break away?

    • @TomLeeman
      @TomLeeman  4 года назад

      Usually best to use some type of anchor

  • @moussalebid753
    @moussalebid753 Год назад +1

    Thank you very much

    • @TomLeeman
      @TomLeeman  Год назад

      You’re welcome enjoy your Dyson

  • @JennaRiccio-fo7mt
    @JennaRiccio-fo7mt Год назад +1

    Thank you! :)

  • @eppityrrell8236
    @eppityrrell8236 2 года назад +1

    Mine was nice and secure for months until it got very lose I used bigger plugs and still no good.... please help 😬

    • @TomLeeman
      @TomLeeman  2 года назад

      You may need some drywall anchors which are the big steel ones that expand behind or get a stud finder and screw it into a stud that’ll never come off good luck thanks for watching

  • @germanshepherd13
    @germanshepherd13 4 года назад +1

    hi, does it come with 2 chargers in case you want to use the wall charger or charge it away from the wall mount? if only one charger and you do the wall mount sounds like you are always stuck using the wall mount since you can't remove the charger cord once mount is screwed into the wall.

    • @TomLeeman
      @TomLeeman  4 года назад +1

      No only one charger unfortunately

  • @IceSerenada
    @IceSerenada 2 года назад +1

    Thank you so much!!!

    • @TomLeeman
      @TomLeeman  2 года назад +1

      You’re welcome I don’t know why they make it so hard Good luck and thanks for watching

  • @jrgudac
    @jrgudac 3 года назад +1

    You skipped the most important part about installing it on the wall. What size bit did you use for the supplied wall anchors?

    • @TomLeeman
      @TomLeeman  3 года назад

      Sorry have to make an additional video

  • @PolymerJones
    @PolymerJones Год назад +1

    All these videos skip the actual drilling and anchor parts and that’s what people need to see

    • @TomLeeman
      @TomLeeman  Год назад

      Thanks and thanks for watching. Good luck with your Dyson.

  • @nidzrulz4eva
    @nidzrulz4eva 2 года назад +1

    Do you need to put in studs only?

    • @TomLeeman
      @TomLeeman  2 года назад

      It needs to be fastened securely because the vacuum weighs a lot it all depends on the board and your anchors good luck thanks for watching

  • @baileycs1514
    @baileycs1514 Год назад

    Awesome - cheers mate!

  • @Genku30
    @Genku30 3 года назад +1

    Thanks Tom!

  • @dottieku
    @dottieku 3 года назад

    I have a v8 model with no screws or anchors. Do you know what size to use? Thanks.

    • @TomLeeman
      @TomLeeman  3 года назад

      I used screws I had but if you can find the stud in the wall it should hold the weight I use drywall screws sometimes to screw right into the stud if not anchors

  • @amorydelamor
    @amorydelamor 3 года назад +1

    What a legend

  • @teeratrack
    @teeratrack 3 года назад +1

    Does it have to be in the stud ?

    • @TomLeeman
      @TomLeeman  3 года назад

      not really but the stud holds better

  • @christinahakaraia1058
    @christinahakaraia1058 4 месяца назад +1

    The light on my one doesn't come on. When it's in the charger.

    • @TomLeeman
      @TomLeeman  4 месяца назад

      Sounds like it may not be charging. You have to make sure that the contact goes inside of the charging port on the Dyson. It may not be getting in there or it may not be plugged in properly. Good luck thank you for watching.

  • @GurlPlz4321
    @GurlPlz4321 Год назад

    Thank you!

  • @augustedaobryltd827
    @augustedaobryltd827 4 года назад +2

    What size screws did you use?

    • @TomLeeman
      @TomLeeman  4 года назад

      I just used some short drywall screws I had lying around

    • @augustedaobryltd827
      @augustedaobryltd827 4 года назад

      @@TomLeeman So did I and its all up and running now. Thank you!!

    • @lucybirt4579
      @lucybirt4579 4 года назад +2

      What size drill did you use? What mm?

  • @virtual-adam
    @virtual-adam 2 года назад +1

    Easy to fit the plug, nightmare to get it back out!

    • @TomLeeman
      @TomLeeman  2 года назад +1

      Yeah it does stick a little bit doesn’t it thanks for watching

    • @virtual-adam
      @virtual-adam 2 года назад

      @@TomLeeman Just found out how to get the plug out, its actually quite easy... ruclips.net/video/Q3Zza9kb68M/видео.html&ab_channel=AskDyson

  • @aokfr8594
    @aokfr8594 4 года назад +1

    thank you so much ;)

  • @arl4945
    @arl4945 3 года назад +1

    Thanks!

  • @silnavarrete1596
    @silnavarrete1596 3 года назад +2

    So- am I the only one who is concerned about it reaching full battery but it’s still plugged in?! I was about to mount the wall hanger-but of course this thought came to mind. I just prefer that I disconnect the charger from the vacuum once it’s reached full charge. I’m guessing I can just pop out the charger head once I see it’s reached full battery? Anyone do this? Or ???

    • @silnavarrete1596
      @silnavarrete1596 3 года назад +1

      Great video by the way! To the point!

    • @TomLeeman
      @TomLeeman  3 года назад

      we just leave it in all the time

  • @hookflash699
    @hookflash699 10 месяцев назад +1

    Is it just me, or are the mounting screws that come with the V8 way too long? Like, dangerously long? I'm afraid I'm going to hit a wire or a water pipe or something!

    • @TomLeeman
      @TomLeeman  10 месяцев назад +1

      If you can find us wooden stud in the wall, you should be OK. I have a special stud finder that tells me if there’s wood or metal. Good luck. Thank you for watching.

  • @smaha4416
    @smaha4416 Год назад +1

    I wish this showed the anchor installation ☹️

    • @TomLeeman
      @TomLeeman  Год назад

      To install the anchors I just need to drill the holes and then place the plastic anchor in and then screw in your screws. You can use a template such as a piece of paper on the back of the unit and mark where the holes are supposed to go and then put it on the wall or you can just try to find some studs and screw in some drywall screws. You may need a stud finder to do that. Good luck. Thanks for watching.

    • @smaha4416
      @smaha4416 Год назад

      @@TomLeeman maybe a dumb Q but did you use the screws that came with the anchors or a bigger screw/drill bit? I tried drilling with the screws first but couldn't get the anchor in after. Tysm for responding!

  • @luvluvluvluvcats
    @luvluvluvluvcats Месяц назад +1

    I watched this in hopes of doing reverse engineering. I have to take an old one off the wall, one that came with this house. Trouble is, there are nuts in the recessed place where the screws should be. I am clueless as to why AND how to remove them!

    • @TomLeeman
      @TomLeeman  Месяц назад

      Need a ratchet if they’re nuts

  • @sandybitter547
    @sandybitter547 2 месяца назад +1

    |😊 Dyson supersize doesn’t fit in hanger. Battery a bit too big

    • @TomLeeman
      @TomLeeman  2 месяца назад

      When you buy it, it should come with its own cradle and hanger. Good luck thanks for watching.

  • @casaiphi7776
    @casaiphi7776 4 года назад +1

    Done!

  • @vegavega6800
    @vegavega6800 Год назад +1

    Sorry to point this out but you have installed it the wrong way around. The cups at the end go on top to store attachments.

  • @lea8412
    @lea8412 3 года назад +1

    Dyson !! If i knew i have to screw by myself station to the wall i will buy other model of vacuum!! Big NO ! And no parts inside as well to do this !

    • @TomLeeman
      @TomLeeman  3 года назад +1

      I had some anchors and drywall screws it’s not that hard the tough part was figuring out where to put the cord thanks for watching

  • @trevorfitzgerald4996
    @trevorfitzgerald4996 3 года назад +1

    That must be the cheapest stand very little money can . What a fail

  • @kimv.a.l
    @kimv.a.l 4 года назад

    Thank you!