Это видео недоступно.
Сожалеем об этом.
About My WLtoys K989 & Trainning
HTML-код
- Опубликовано: 3 фев 2020
- In response to many requests, I made a video of my "WLtoys K989" tuning and drift training.
I'm not doing anything special, but I'd appreciate it if you could refer to it.
■WLtoys K989
[Banggood]
www.banggood.c...
[AliExpless]
s.click.aliexp...
▶︎My WLtoys K989 Spec
[Tuning]
Front weight(10g)
Steering angle up
Remove damper spacer(all dampers)
Rear differential lock
Stealth mount(DIY)
[Rim]
KYOSHO MINI-Z AWD Multi offset wheel(F:narrow,+3.5/R:wide,+1)
rc.kyosho.com/...
[Tire]
KYOSHO MINI-Z AWD Drift tire(F:narrow/R:wide)
with DIY Lettering
rc.kyosho.com/...
rc.kyosho.com/...
[Body]
Add sticker(DIY)
Add exhaust(DIY)
[Power source]
130 brush motor(stock)
7.4V Li-Po 400mAh(stock) & 450mAh(option)
[Tuning & Mod detail image]
www.instagram....
▶︎Movie
[Camera]
iPhone7 & 8
[Edit]
Videoleap(iPhone App)
Glitch Studio(iPhone App)
Photofox(iPhone App)
Pixelmator(iPhone App)
[Music]
Javi Lozano & Oskier - Whatchu' Doin
• Javi Lozano & Oskier -...
[Driver]
Sol(15 years old son)
#wltoysk989 #minirccar #rcdrift
Error correction🙇🏻♂️
Front width of "Drift tire & Rim" description.
Error 8mm → Corrected 8.5mm
How can i change the offset of the wheels?
@@samuelebaiano6505
The offset is fixed for each wheel (Rim). To change the offset, replace it with a wheel with your favorite offset.
@@studio55-jp ah ok, so the wheels have their own offset... Okok
@@studio55-jp the originals wheels aren't good for drift, are they?
@@samuelebaiano6505
Yes
In a sea of upgrades and tuning your minimal setup and encouragement to practice comes as a breath of fresh air!
Thanks😊
I'm glad to hear that.
I never boring to see your video. no need to upgrade many part just tuning original part and used superb skills to control a car Great job brother your are my inspiration.
I wanted to prove that spending a lot of money and making complicated modifications is not always necessary.
I would be very happy if you could help me understand this😊
Absolutely superb, less is more!!! Brilliant skills!! Could watch this all day!!
Thanks😊
I'm glad to hear that☺️
this has helped me so much in my drifting!! THANK YOU
I hope this helps😊
yess it did! after seeing how you use the controller, i can drift precise now ❤️ ur the best
Your 1-hand drifting is better than my 2-hands drifting! Thanks for the motivational video!
Thanks😊
If you continue practicing without giving up, you will definitely be good at it.
Thank you! Yes, it’s all about Practice Practice Practice😎
Canyon Racer
😆👍
You're my hero, you're driving is breathtaking!
Thanks😊
Thanks for this video, driving skills and simple tuning without bring a buck will make drifting easier and less expensive. For now i will invest in getting a great body shell for this car!
I hope this is useful to you😊
If you are going to spend money, I think it should be spent on Radio mods.
That is the most effective mod that will improve performance.
@@studio55-jp What is radio mod? like changing the transmitter?
Bro. Your video really makes me confirm that i need to buy one. Superb video n thanks for sharing!!
Amirul Asyraf
I’m glad to help.😊
dah beli ke belum tu bro? hahhaha,jom jadi geng aku.
@@daddydeetv9955 dah bulan 5 haritu
Great video, very informative and you are a King of drift!!!
Mat 84
Thanks❗️😆
Thanks for sharing your setup. Moving weight to the front is really helpful.
I hope this helps😊
@@studio55-jp I'm sure it will😃👍🏻
GREAT JOB... GREAT EDITING..
NICE TO REPLAY.. NICE TO WATCH.
10X FOR THIS VIDEO
Thanks☺️
I hope you will find it useful.
Great video 😁 its nice to see proof that all these expensive and time consuming mods you see on here, while fun to do, are not necessary if you have sick driving skills 🤙
Thanks‼️
I am very glad you understand😊
Expensive modifications do not make you better at drifting.
What matters is just a few modifications and a lot of practice.
..you are definitely the "Ken Block of the K-989"...👍👍👍
Thanks😊
I'm glad to hear that😆
Best mod/drifting guide on this car
Thanks!
I hope you will find it useful😊
Thank you for sharing & tutorial. Really appreciate & inspiring video!! 😁👍🏼👍🏼👍🏼
NAEL RC
I hope you will find it useful☺️
Great info thanks, just what i was looking for👍 just ordered my K989 and the wheels and tires you listed. Looks forward to giving this a go
I hope you will find it useful😊
@@studio55-jp thanks i have ordered the kyosho 8.5 and 11mm tyres. I noticed in the later videos you change the tyres are the kyoshos ok?
I also got the Wide 1.0 Offset and the Narrow 3.5 Offset rims. Never tried drifting before so looking forward to Learning.
@@dgentry81
I think KYOSHO tires are suitable for beginners. On the other hand, LF-3 requires getting used to. Good luck with your practice😊💪
@@studio55-jp Thank you
Ci volteva proprio una bella lezione di Drift !!!!... gran bel tracciato
Daniele Mulazzi
😊👍
VERY SIMPLE! HELPS A LOT.
I'm glad to hear that☺️
Hmmm , lemme try tomorrow
C'est une très bonne vidéo ; merci . Je drift aussi avec ma K989 d'origine (pas besoin de la 969) . J'ai juste graissé les roulements et engrenages :-)
Merci beaucoup😊
@@studio55-jp ; thanks to you :-)
Awesome video. I have just got a K989 and now I’m trying to drift it without any tuning at all just to see how far can I push the stock K989 in the sea of upgrades :))
That is a great attempt👍
I did the same thing once.
And this video summarizes the minimum tuning content required, which I derived from the results.
@@studio55-jp yeah, the only thing that I found annoying with the stock K989 is it’s tyre. It would randomly picking up grip, causing the car to have some unpredictable behaviors when drifting. I have to keep the throttle really high in order to prevent the tyre from picking up too much grip
@@lenghi5045
One possible contributing factor to the randomness of the grip is the suspension.
Following Beaver's video can improve it, though not completely.
ruclips.net/video/QAGTXo70MmU/видео.html
So it's not about how expensive your car but it's absolute depend on the man behind the wheel... Man you don't even need gyro. Great vid btw somple yet impactful.
Thank you so much😊
I want to tell people that training is more important than upgrades.
Awesome stuff man. You got mad skills
UCmenierian Hobbies
Thanks😆
@@studio55-jp 🙂
Great drifting
Thanks😊
I got a k969 and a gyro finished done no more modding
When using a gyro with AWD, set the gain weakly. Otherwise you will not be able to drift.
Super content. Very informative and to the point. Please create a rear lock diff tutorial. And magnet body tutorial. Thank you
Abank Abe
Thanks.
For diff lock and magnets, please check the video description for links to explanatory images.
@@studio55-jp done the diff lock. It works great thank you. Not perfect since i use my business card instead of card board. Please can you kindly provide link as where did you purchase magnet plastic plate and front weight plate? How did you attached the weight in the front? Thank you very much.
Abank Abe
I bought the plastic plate, magnet and weight at the DIY store. You can substitute a familiar item for the weight. For example, bolts, nuts, magnets, etc. Adhesive uses double-sided tape or hot glue.
you jst earned a sub :)
mostafa dawud
Thanks😊
Do some more. Handcam drifting 😍😍😍😍😍
See also↓
ruclips.net/user/shortsFsln2-JjuGE?feature=share
God level stability bro😍😍😍😎😈😈😈😈🤘🤘🤘🤘😝😎😎😎😍😍😍😍
Thanks😊
Im subscibing your channel love rc drifting 😍😍😍😍🤘🤘🤘🤘
Thanks‼️😊
Thank you great video! I am struggling to find the wheels and tires (or even something comparable). You wouldnt happen to have a link or insight as to where I could purchase them?
Thanks😊
Tires can be purchased from the link provided in the video description. My rim seems to be discontinued. Please look for your favorite one with "rcMarT" etc. I think "GL Racing" is also good.
Many thanks, very helpful
rajeev pariyarath
That's good❗️😆
Crazy one hand trick
😁😁😊
Awesome. Thanks for sharing 👍🏽
Peter Hong
😊👍
Any tips on how you made up the magnetic body clips 🤟
Peter Hong
Did you read the video description?
studio55 yes. I a look over at your instagram photos. Gonna try and replicate. Thx
Love your lesson ,This is ones of best vdo thank you.
ติชเองฮับ
Thanks.
I would be happy if you found my video useful😊
Great video. thanks bro
EdwardRC Car
Thanks❗️😊
Spettacolare...bel video... ciao dall'Italia
Thanks😊
I hope you will find it useful.
Rear diff lock, really help a lot👍
I hope you will find it useful☺️
@@studio55-jp open front diff or locked? Or one way diff sir?
@@yjtoh87
Everything is stock except what is explained in the video. In other words, it is an open diff.
@@studio55-jp Got it! Awesome skill drive brother!
@@yjtoh87
Thanks😊
It looks real drifting
Thanks😊
Super TOP vídeo !!!!
Thanks😊
came for the mods, stay for the nice drifts
I hope you will find it useful.
@@studio55-jp getting the K989 soon so im gonna make it into a drifter since i already got a M05 for touring, Slash for some offroading and just need something i can drift in my apartment
@@studio55-jp
got the car now and it's smaller yet faster than i expected, printed some plastic tires for it and it's sliding almost too well
@@Voltmander 👍😊
OMG that's it, I am buyin it!!! Superb video, but are those tires made some markers on the floor?
eM4rio
Depending on the floor, some tire marks may be present.
Nice bro this is next level :D
Matej Krnjovšek
Thanks😊
stunning
Thanks😊
I think I may buy one of these babies
Harry FP 😁👍
Thanks for sharing bro
Chanh Nguyen
I’m glad to help😊
Oh yes. Yesyesyesyesyesyesyes. I'm hopefully getting this for Christmas and I'm gonna see if I can learn how to drift like you! Just one question, do the cones come with the car??? I already have a few but it would be nice to get proper ones. Also I noticed you use lego for obstacles great choice lego is the best :D
Cone is not included.
Once you have the K989, do your best to practice.
@@studio55-jp Thanks! Its ok I have some cones already.
Wow 👍😍👍 Amazing video ~~👍👍👍👍👍👍👍👍👍
Thanks😊
I hope you will find it useful.
Nice
Thanks😊
Great vids! Do you think the staggered wheel/tire sizes make a difference opposed to being all narrow? Sorry if you mentioned this before, but I couldn't find an answer in your other vids. Thanks!
Thanks😊
All my K969's have narrow tires. I haven't done an exact comparison, but I don't see a huge difference. When I decide on a tire width, I am more concerned with matching the body width than the grip balance.
So did you lock the diffs also? Thanks for sharing.
@@roadstar499
Watch the video properly…
ruclips.net/video/43raSVVCIo8/видео.htmlsi=1YXtY9I0AWb0rBeZ&t=40
Hey man!!! Great video! Just got the same car and tuned it the same way. I have no experience but I just noticed that it's really HARD to learn how to drift like u. Do u think the surface makes a difference?
Khaled Trabelsi
Thanks!
Driving will differ depending on the road surface. You should choose a flat and slippery road surface as much as possible.
he has a front one way diff installed
Congratulations again for your beautiful videos ... a stupid question: what kind of glue do you use for the magnets under the body shell?
Thanks😊
I used hot glue or strong double-sided tape.
😍😍😍😍
😊😊😊😊
Hi, when I remove the suspension spacer, my chassis plate is touching the ground. (Maybe because I have the 284131 model). How far is your bottom plate from the ground? I'll try to print smaller spacer, but definitely cannot remove them entirely...
The ground clearance of my K989 is about 2.5mm.
However, this may not be helpful because my current K989 has had the ESC and other electronic parts replaced.
There are two possible reasons why it touches the ground.
1. 284131 is heavier than K989 because it has LED lights and front and rear diffusers.
2. the suspension and arms do not work well.
This can be solved by following Beaver's video.
You may want to try this one.
ruclips.net/video/QAGTXo70MmU/видео.html
Hi, did you use a lubricant spray like wd-40 or something like that on the floor to make smooth drift? my friend told me to use lubricants on the floor to make a smooth drift. Thanks before 😄
SLEEP DOSE
I don't use spray.
My idea is to choose the right tire for the road.
สุดยอด เทพนักดริฟ 👍👍👍👍👍👍👍👍
TorKung Channel RC 111
Thanks😆
@@studio55-jp 👍👍👍👍👍
Hola,tienes algún vídeo explicando lo del insertar un cardboard en el diferencial,me gustaría hacerlo en el mío,gracias saludos
cristianr6r
Sorry, there are no videos. However, there is a link to the explanatory image in the video description, so please have a look.
Управляемость супер
Thanks😊
Excellent.....do u think upgrading transmitter would help in any way?
As you can see in the video in the link below, I think the Radio Mod is the most effective of all the mods. I believe that the transmitter alone can be effective. However, I think it is difficult to find transmitters that can be linked to stock ESCs. So I would recommend replacing the transmitter, receiver, and ESC all together if possible.
ruclips.net/video/BSdXZqcM_ps/видео.html
if you didn't change the tire into drift ones, will you still be able to drift?
i just bought 284131, the tires are not slick. It's very hard to drift. I wonder if it's my skill or i actually need to change to slick tire 😅
If you want to drift like in my video, drift tires are a must.
@@studio55-jp aha ok so this is my first problem with this car 😅 coz everytime i lower the throttle when turning, the car just stops 😄 i doesn't want to spin at all
@@azkanand5832
There are many different types of drifting.
If you want to drift on a dirt surface like a rally car, it is not impossible to drift with grip tires.
But if you want to do so-called "RC Drift" it is impossible without using drift tires.
@@studio55-jp yes i want to do like you did, drifting on my house floor. So it seems i must need to buy drift tire 😄
@@azkanand5832
My video is a tutorial for such people.
It explains how to make WLtoys easier to drift with simple modifications, but at the same time it is the minimum required.
I've followed you on Instagram for a long time I didn't know you had a RUclips channel I just subscribed I just picked up the wltoys and they all wheel drive mini z any recommendations on parts for the mini z like you did for the wltoys?
I don't own a MINI-Z, so I don't know the details, but I would recommend FOW (for AWD MINI-Z).
Thank you for subscribing.
There are videos on Instagram and RUclips channels that are only posted on each, so we hope you enjoy both😊
When I removed the spacer from damper, the bottom of the car can hit the ground easily, making some annoying sound :(
Hawx Won
Is the road flat? My K989 doesn't make a sound.
@@studio55-jp Yes it's flat,but if I remove the spacer, one side of the bottom of my car will touch the ground, guess I have to use larger wheels ?
Hawx Won
I think that is probably because the movement of the lower arm is not smooth. Try disassembling it to remove burrs, and adjust it so that it moves smoothly.
@@studio55-jp Thx, I'll take a look at that part
Awesome
UJI NYOBA
Thanks😊
Your transmitter looks WAY different than my WL Toys. Mine is the same as the 959b that I have. The 2 in 1 receiver looks different as well? Is yours more precise???
My transmitter and receiver are stock. I made my own stickers and decorated them.
自分のシャシーは精度が悪く元々リアのキャンバーナックルが左右でキャンバーやトーが違ったりしてまともにドリフトできません。本当にこれだけのセッティングでこの走りができますか?
「まともにドリフトできない」の「まとも」がどの程度を意味するのか不明なため回答が難しいですが、私のシャシーには貴方のような問題はありません。
しかし、この製品は決して品質が良いとは言えないため個体差の問題が生じる可能性はあるかと。
私の動画は事実を述べています。
ここでそれを証明することは不可能ですが、まずは貴方が抱える問題を解消したうえで事実か否かを判断されるべきと思います。
@studio55 great skills! Can you make another tutorial with markers showing the neutral positions of the throttle and steering? Will be very helpful for beginners like me learning how to drift with wltoys cars.
It's very difficult to create the tutorial you want. I can't come up with a good idea to make the throttle movement easier to understand than this video. Also, I think it's easy to understand the amount of steering movement by looking at the spokes on the steering wheel.
In the first place, the amount of movement is not something you can see and remember. You will develop a sense by practicing repeatedly.
@@studio55-jp Thanks for the reply. May i ask why there is a need to keep "pumping" the throttle? For example, isn't it easier to maintain a donut by keeping the throttle constant while just adjusting the steering?
@@polysheep
Before answering your question, I want to ask you the same question. Can you keep a donut of the same size while keeping a constant throttle?
@@studio55-jp I'm doing that on my k969., hence i'm confused why another taiwanese youtuber also advocates pumping the throttle.
@@polysheep
Ideally, you can maintain the donut with a constant throttle. However, the road surface condition is not always constant, and the grip force changes. Therefore, it is necessary to fine-tune the throttle.
I'm not "pumping" the throttle, I'm "adjusting" it to the road conditions. Donut turn is an exercise to get a sense of the throttle adjustment.
Bro what is the difference by removing the "Damper Spacer" on the suspension ?
The damper stroke is extended when the spacer is removed. As a result, the road surface followability of the tire is improved. The better the followability, the more traction is applied.
Hey! Can u help me how do you do this rear diff lock system with the cardboard? I want to do this upgrade too on my car. Thanks for your help
Simply open the gearbox, take out the diff gear, disassemble the diff gear and pinch the cardboard. It's not difficult.
Buenas,donde puedo conseguir esos imanes para la carcasa?? Gracias y enhorabuena por sus videos!!
Enrique Gómez lozano
In my country it is sold at the DIY store. You can also purchase a magnet mount for a 1/10 scale car from the RC shop.
Great video dude! I have a WLtoys 284161 and it is an awesome buggy however there is something I noticed about it. Whenever I turn the wheel full throttle and not, it tends to cut 20% of its power from the motor. Is that normal since this is my first hobby grade RC. Whenever I go full throttle, it has no issues at all but when I turn the wheel the motor tends to cut some of its power. Is this a transmitter issue or just a feature of the RC itself? The 284161 I have has the same transmitter as the 284131 and 284010 (at least I think with the 010 model.) It would be great to know if this is a problem or not, a feature or some side effect. I have been trying to trim down the speed for the younger siblings to play it but in the end it doesn't want to move whenever they hit the throttle then steer to the left or right.
Thanks.
I do not own a 284161 so I do not know the details.
The EPA setting on the transmitter is fine, correct?
If turning the steering wheel causes a loss of power, there may be some resistance in the drivetrain.
For example, the drive shaft (dog bone), arm, etc. may be interfering somewhere when the handle is turned too far.
@@studio55-jp I see, thank you for that. If your k989 doesn't experience any throttle loss when turning while on power it means that mine might be binding. I will try to clear the places that needs to be cleaned and see if it will improve anything. This is my first RC build honestly and i would like to know what causes the binding. Whenever I do throttle slightly the car does struggle to start even with half the throttle trim. It stops running when I turn the wheel with it as well. I appreciate the insight
@@studio55-jp the EPA is at full. I can hear the motor turning but the wheel is not spinning when applying 20% throttle while the trim for the speed is at full so it might actually be the bond. It gets worse when I turn the wheel. I tried removing the wheels and it still struggles to run even off the floor and just on some platform. It would be useful if I know what to trim or fix cause I am not expert on RCs by any means.
@@DOM1N4TOR_FR34K
Have you seen this video?
You may want to use this video as a reference to optimize your drivetrain.
ruclips.net/video/WfxeBBW6boM/видео.htmlsi=zBcmpjAE5BW0D4D7
@@DOM1N4TOR_FR34K
Backlash adjustment may be necessary.
Check to see if the motor pinion gear and spur gear are properly meshed.
If you still have questions, send me an Instagram DM.
It is difficult to explain further as I can't attach images to the conversation here.
오~ 멋집니다.
Thanks😊
How did you manage the stiff diff problem. If you release the throttle, the car wheels just stop. Did you do anything to fix it?
Releasing the throttle means applying the brakes. In other words, it is normal for the tires to stop.
If it doesn't, and you mean to smooth out the moving parts, you may want to refer to Besver's Hobby video.
ruclips.net/video/TnhriaSSfSA/видео.html
ruclips.net/video/QAGTXo70MmU/видео.html
@@studio55-jp thank you. Did you do these mods?
@@JohnyPatrick
Did you do what I presented in the video? Do you mean? Then yes, I did. This is maintenance rather than modification.
@@studio55-jp got it
I did grease the differentials. But I'm yet to sand them and do the maintenance. I'll do this. Thank you!
@@studio55-jp btw great videos. I love watching these. I've the k969 so i don't have to lock the diffs but after seeing your videos i want to buy this car body haha 🤣
Too good
Stewart Taylor
Thanks😊
1:08 do you have video how to install magnets for body shell?
There is no video. Instead, the video description has a link to the descriptive image.
Love
😆😆😊
Nice..thanks..🙏🙏
reian13
😊👍
Hi. I'm confused with the stock transmitter setting. Can advice me how to setup it.
Can you be more specific about what you are confused about?
@@studio55-jp the button on the transmitter. I don't understand the function of the buttons.
@@nasrullahyusof4089
Don't have the manual?
Try searching for "wltoys manual pdf".
could you do a video on how to lock the diff? im getting this car soon. thanks.
Soldier Doggo
Please read the video description. There is a link to explanation image.
@@studio55-jp ok thx
How weeks/month needed for your skill like this?
okky adams
It is difficult to answer that question…
We have been driving a 1/10 scale drift car for a year. Thanks to that, I was able to run immediately. If we had no experience at all, it could have taken between six months and a year.
@@studio55-jp haha i just started one week ago 😅
But i wanna beat you bro 😅
Do you make video about installing magnet on body?
okky adams
Do your best, practice and be better than me😁
Read the video description about magnets. There is a link to the explanation image.
Could you elaborate about the steering more? What did you do to the servo horn?
Punchout FPV
The servo horn remains stock.
For more information, please read the video description. There is a link to the tuning explanation image.
Can you make rear diff lock tutorial?
Have you read the video description?
There is a link (Instagram) to the explanatory image there.
thanks
I am trying to do the steering mod but i am not able to pull it out
Did you remove the bolt first?
Are you using the stock metal 27t pinion or did you install the 15T plástic one? Great video!
Which gear are you asking about? Is it a motor pinion? All gears are stock plastic. Also, I haven't done anything other than what the video explains.
@@studio55-jp yeah, mine came with a metal pinion on the motor, with i think 27t. Then in the pinion bag, there are another 4 plástic pinions(12t,15t,19t and 20t i think) some say that the 15t one is the best for 1.93 gear ratio. How many t does your pinion have?
@@newnocski
I think it's 27T. As I said earlier, I'm not doing anything other than what the video explains. That is, the gear has not changed. (Stock state)
Also, since my K989 is an early model, all gears are made of plastic. (I think the K989/969 currently on sale has been changed to metal due to a specification change)
@@studio55-jp thank you very much. Im starting on this 1/28 drift world and your videos are very enjoying. Thanks a lot and keep the good work. Máster!
I see in stores the size of rims 20mm or 22mm. What size must I get? I only know narrow 3.5mm wide 1.5mm
The most important thing in choosing a Rim is to choose "for MINI-Z AWD". Other rims cannot be used because the hub shape is different.
The mainstream diameter is 20mm, but there are also 22mm. Please choose according to your preference. However, of course, the tire and rim diameters must be the same. As far as I know, there are few types of 22mm tires. So I'm using 20mm.
Also, offset must be considered when choosing a rim.
If you want to talk more, please send me an Instagram PM.
I have a weird problem, I can do right hand drifts nicely, but on left hand ones it tends to doughnut, even with the exact same throttle and turning angle, everything is stock except the servo arm mod and the preload clips removed, any ideas? Nice vid btw.
Make sure all wheel nuts are not overtightened or loosened. Also, try adjusting the steering trim.
If you would like to talk more, please send us an Instagram PM.
@@studio55-jp That made it much better. Thank you.
Where can i get weights like that for the front?
This is not an RC car specific part.
It is just a steel plate.
It is sold at DIY stores.
Anything small and heavy (e.g. magnets) will do.
Hey man which tool i need to change steering wiper position
2.0mm Phillips screwdriver.
I let my kid play with mine and one of the ball joints on top of front right suspension arm broke. Just thin plastic so dont know how to fix it. Quite sad cos it was drifting great with just a bit of tape on the tyres
Stewart Taylor
That's sad😢
I think it is better to buy spare parts and replace them.
You can get full metal parts kit on banggood for 23 usd
Thanks for the video
Very nice explanation
I also want to buy. I think what is better between K969 or K989 FOR DRIFT ??
I know the K969 rear differential comes locked AND DRIFT TIRE IN STOCK
what you think?
Yaniv Oz
I hope you find it useful.
K969 and K989, I think you can choose the one you like.
K989 has to lock the rear differential and buy drift tires, but K969 doesn't have to, so it's easier.
@@studio55-jp
ok I understand.
is it easy to put the cardboard inside to diff? It won't break the dip?
Yaniv Oz
It's not that difficult, so it should be fine.
However, the parts are very small, so care must be taken to avoid damage and loss.
Does "dip" mean "ESC"?
If so, it won't break.
@@studio55-jp
i mean diffrential
Yaniv Oz
I have been using diff lock for over 2 years and have never broken it.
Apart from locking diffs...have u made them run smoother thanks
I hope you will find it useful.
Great video. beginner here. may I know what and how you do the offset wheel?
Thanks😊
Sorry, I don't understand the meaning of your question. Want to know what to offset the wheel for?
@@studio55-jp I saw f narrow +3.5 and R wide +1.0. What do I need to adjust?
@@jaanhua
To change the offset, you need to buy a wheel with your favorite offset.
@@studio55-jp so all I need is to change the wheel. I thought I need to make adjustments tweaking somewhere haha
@@jaanhua
The offset is fixed for each wheel. You can't adjust it. You have to change the whole wheel to change the offset.
Whats your speed setting to achieve this awesome drift?
It is only adjusted with the throttle lever.
There is no other way to adjust the speed on this car.
@@studio55-jp ok. Thank you for the advise.
merhaba k989 arabama drift lastiği takınca böyle olur mu?
You need everything that is shown in the video, not just the drift tires.
In other words, it is important to adjust the entire car.
Ummmm , about diff mod , what it's does and what is the difference?
Simply put, the torque increases and the rear tires become slippery.
If you want to know more, you first need to know the basic features of the differential. The basic functions and diff locks of the differential are basically the same as those of 1/10 scale cars and actual cars, so please search the Internet.
@@studio55-jp ok , ty for answered my question :3
Nice skills 👍🏼just wondering if you own the k969 and weather it's a better beginner drift car.
If anyone owns one let me no what you think.
Jacob Haley
I don't own K969, but I think K969 is perfectly fine.
Because the chassis of K969 and K989 are basically the same.
The main difference is the rear diff gear, and the K969 is a solid diff, so there is no need to lock it.
So I think K969 is more suitable for drift.
@@studio55-jp cheers for responding. Was thinking about getting the k989 but I'll need to buy drift tires to get a better experience so k969 is stating to look like a better option.👍🏼
Jacob Haley
I don't know the performance of the drift tire attached to K969, but I think that KYOSHO or DS Racing tires are probably better.
@@studio55-jp righto cheers for the help 👍
Jacob Haley 😊👍
Do you have build process video?
There is no video. There is a link to the descriptive image in the video description. It's not as difficult a task as you need a tutorial video. If you have any questions, please ask on Instagram PM.
@@studio55-jp thanks bro and successsss 💪
Need to change the differential gear? Or just change tyre?
Arron Ng
I think that it will be easier to run if you change tires and diff lock.
So how is k969 compared to Kyosho mini-Z MA020 ?
avalaugh1980
I'm sorry, I can't compare because I don't have a MINI-Z.
However, I think that K969 has good value for money.