These are the absolute best how to videos for the super sport class on youtube. You have helped me out time and time again, thank you so much for sharing the education. !!
just wanted to say this video is fantastic! it's great to see someone doing what i need to go do to my bike. i knew how to do the front that's never been my issue. getting to the rear is my problem lol
@stijnecorsa if the service manual says it is okay, go for it. Be patient as it may take the master cylinder a while to bleed fully. I will normally expect to spend 20-40 minutes for this job and make sure all your body work is completely protected or removed. Dave Moss Host
Use a clear hose when you bleed the old school way...so that you can see fluid coming out.....Also try to keep the hose going upwards (have someone hold it for you or tie it up something) so that air isn't sucked back in trough there (air likes to go up and the fluid coming out creates a plug)...Also always be aware to keep fluid in the reservoir so you don't suck air back in that way...Pull lever, open nipple, close nipple, release lever...
hi dave i just recently came across your great videos! i was wondering what is the replacement now for the Bleeder tool on motion pro i no longer see it?!
@DVXCine the dyno work on the GSXR is on the OTT site under how too's and look for project GSXR dyno at Leo Vince. There are three videos there. Dave Moss Host
Your literally epic I'm building my zx6r and my deet -da-dee friend disconnected my front brake :-/ Now I can hook her back up :-) Thanks so much I'm sooooo subscribed for life :-) EPICCC!!!
I Thank you very much for posting such an instructive video. Now I need help, my rear brake pedal is very louse for some reason. I put my right foot on it and it's really louse as if there is no brake on my rear. Now I'm a little bit worried about that because I dont want the bike to do any rear whellies with me while braking with the front brake. please help !!!!!!
Hi Dave! I would like to replace my brake lines of my kawasaki Z750 09 ABS equipt. Do you know if i can bleed the brake normaly like you did? In service manual they say it's no problem, I want to be sure. Because i need to remove all the brake fluid, place the hoses and refill the system. I have a bleeder :-) Thx for your answer.
if the rear brake hangs upside down, you need to turn it right side up to bleed it correctly. If the system won't bleed, the master cylinder may need a rebuilt kit readily available from any dealer.
These are the absolute best how to videos for the super sport class on youtube. You have helped me out time and time again, thank you so much for sharing the education. !!
just wanted to say this video is fantastic! it's great to see someone doing what i need to go do to my bike. i knew how to do the front that's never been my issue. getting to the rear is my problem lol
Thanks for your help Dave! This video is great!
@stijnecorsa if the service manual says it is okay, go for it. Be patient as it may take the master cylinder a while to bleed fully. I will normally expect to spend 20-40 minutes for this job and make sure all your body work is completely protected or removed.
Dave Moss
Host
Use a clear hose when you bleed the old school way...so that you can see fluid coming out.....Also try to keep the hose going upwards (have someone hold it for you or tie it up something) so that air isn't sucked back in trough there (air likes to go up and the fluid coming out creates a plug)...Also always be aware to keep fluid in the reservoir so you don't suck air back in that way...Pull lever, open nipple, close nipple, release lever...
hi dave i just recently came across your great videos! i was wondering what is the replacement now for the Bleeder tool on motion pro i no longer see it?!
@DVXCine the dyno work on the GSXR is on the OTT site under how too's and look for project GSXR dyno at Leo Vince. There are three videos there.
Dave Moss
Host
Your literally epic I'm building my zx6r and my deet -da-dee friend disconnected my front brake :-/
Now I can hook her back up :-) Thanks so much I'm sooooo subscribed for life :-)
EPICCC!!!
@BoomVision you can find it on Amazondot com under phoenix brake bleeding tool. For some reason it has gone from the Motion Pro page.
Dave Moss
Host
@realhavoc1 Great, Glad we could help!
Great videos! I was wondering where can I buy that Brake Bleeder tool?
Oh after watching the video he said Motion Pro Phoenix bleeding tool
I was unable to find the bleeder you use in this video. Is there another one that is current, and just as good you recommend?
I Thank you very much for posting such an instructive video. Now I need help, my rear brake pedal is very louse for some reason. I put my right foot on it and it's really louse as if there is no brake on my rear. Now I'm a little bit worried about that because I dont want the bike to do any rear whellies with me while braking with the front brake. please help !!!!!!
Hi Dave!
I would like to replace my brake lines of my kawasaki Z750 09 ABS equipt.
Do you know if i can bleed the brake normaly like you did? In service manual they say it's no problem, I want to be sure.
Because i need to remove all the brake fluid, place the hoses and refill the system.
I have a bleeder :-)
Thx for your answer.
if the rear brake hangs upside down, you need to turn it right side up to bleed it correctly. If the system won't bleed, the master cylinder may need a rebuilt kit readily available from any dealer.
ironically my name is robert marsh and i race gsxrs.funny enuf iv followed many of your videos without realizing your name.
my front calipers are rubbing the disks, so the front wheel isnt turning freely. Any suggestions on how to fix this? 2005 gsxr750. Thanks
@OnTheThrottleTV
Thx for the reply appreciate it !
Well done Dave, when does she go back to the dyno.