I think the fake sight can actually function as a priming assist. You put it on the rail and it can serve as a catch point, so that you can prime it with an open palm. You wouldn't have to rely on grip strength to prime it. With it serving as a catch point, you can also probably prime it off a belt, giving it one-hand wield capability.
Well that is a 2.0 correct that means that the slide lock was at it after Adrian designed his I think you got a blaster that's very similar to a fire rat now congratulations
Mine is a bit weird. With the darts it came with, it shoot very accurately. But when I am using worker gen 3 darts sometimes it shoot very low velocity.
@@gordonsoo I have found the problem. It might shoot the dart it came with faster because somehow it is giving more seal (altough diameter is smaller than worker dart but material feels a bit stickier?). It is the seal on the piston head being the main problem, the o ring is not giving the perfect seal (I can see some light going through between o ring and inner cylinder wall if I see it under the light), after I lube it now it shoot worker gen 3 very hard and super accurate and consistent!
Well done. It seems the point of aim thing worked. There seemed to be multiple points of aim though. It may take more work to add those other points, but it shows accuracy. Fairly impressed with the accuracy. Not as good as airsoft, but decent.
@@gordonsoo oh definitely. The only ones I know of that are truly accurate are the Nerf Mega series. Hurts a lot when you get hit in the eye, but it won't take your eye out like airsoft will.
@@gordonsoo anyway, may add all points of aim to it so people know the amount of drop or if there's any movement to the side. From a straight shot. Maybe you can help teach me how to edit after I'm finished serving. Then I'll show you what my airsoft guns are like.
@@SoldierO Oh yeah or perhaps i can get some sort of clamp tripod to stabilize the blaster so that the point of aim is consistence. But overall the point of aim is pretty dead fixed as I always will make sure that the sight is always points at that particular direction before pulling the trigger. Oh yeah .... I definitely would like to see how an airsoft will do :)
They told me about that too, apparently they got mass reported by other competitors due to setting product price too low, so shoopee temporarily freezes their store saying saying that they are selling forbidden item.
I was gonna say if it's not surely you could just drill it out to work on either side. My friend had an accidentally left handed 9mm he had to make fully ambidextrous because he's right handed.
If you're brave enough you can dismantle part of the blaster in order to access and dismantle the mag release lever. It is so springy once I assemble back the mag release lever. I even showed it to Mech Potato since they showed me another one of the blaster with the same non-springy issue. Just be careful and make sure to slide out the plastic piece holding the 2 halves of the blaster together, right below the front barrel after removing all the side screws.
@@ScumBunny THANK YOU. I always see people complaining about the design being "stolen", but the original Gecko is taken from Cyberpunk. So copying someone else's design and selling it is ok as long as it's some dude on Etsy but as soon as someone in China takes it and builds it for cheaper it's a problem? Bullshit.
you are the Asia's Coop772
I think the fake sight can actually function as a priming assist. You put it on the rail and it can serve as a catch point, so that you can prime it with an open palm. You wouldn't have to rely on grip strength to prime it. With it serving as a catch point, you can also probably prime it off a belt, giving it one-hand wield capability.
Yeah i kinda tested it a moment ago, for the stock spring so far so good, but I am not too sure what if i drop in a spring upgrade....hmmm
@@gordonsoo A spring upgrade, you say? That would be interesting to see if it would work.
Thanks for reviewing, I hear that there is a 3.0 version, they are all made of metal
NICE!, thank for the info buddy! can't wait to get my hands on one
Well that is a 2.0 correct that means that the slide lock was at it after Adrian designed his I think you got a blaster that's very similar to a fire rat now congratulations
Thank you, i’ll be keeping an eye on this one
The 68k sniper on mech potato looks good and the good but i need more info about it because no one made a video about it yet
I've ordered an AWM version of that.
Mine is a bit weird. With the darts it came with, it shoot very accurately. But when I am using worker gen 3 darts sometimes it shoot very low velocity.
Hmm something with worker gen 3 that I can't really get it, the same thing happens not only to the lizzy but my DZP MK2 too
@@gordonsoo I have found the problem. It might shoot the dart it came with faster because somehow it is giving more seal (altough diameter is smaller than worker dart but material feels a bit stickier?).
It is the seal on the piston head being the main problem, the o ring is not giving the perfect seal (I can see some light going through between o ring and inner cylinder wall if I see it under the light), after I lube it now it shoot worker gen 3 very hard and super accurate and consistent!
Slide locks R usually just notched on the mag. Seems a strange way they choose how to make it work on this.ThankQ. TkEZ>UK
Haha, yeah, it kinda complicate things a little bit :)
Hi Gordon, lizzy gecko 2.0 compare to LP55, which one more accurate in 8 meter range? 2nd which one more powerful?
Thanks Gordon
You are welcome :)
Do you know that there is a shell eject lizzy now
Yeah, someone, just saw it and I was like WHAT~~~ gonna get it
Can this gun do the Eject Bullet thing?
There is another version of this that can do it
Well done. It seems the point of aim thing worked. There seemed to be multiple points of aim though. It may take more work to add those other points, but it shows accuracy. Fairly impressed with the accuracy. Not as good as airsoft, but decent.
Haha, all thanks to your advice, these foam dart blaster can be pretty accurate depending on how you set it up (mod).
@@gordonsoo oh definitely. The only ones I know of that are truly accurate are the Nerf Mega series. Hurts a lot when you get hit in the eye, but it won't take your eye out like airsoft will.
@@gordonsoo anyway, may add all points of aim to it so people know the amount of drop or if there's any movement to the side. From a straight shot. Maybe you can help teach me how to edit after I'm finished serving. Then I'll show you what my airsoft guns are like.
@@SoldierO Oh yeah or perhaps i can get some sort of clamp tripod to stabilize the blaster so that the point of aim is consistence. But overall the point of aim is pretty dead fixed as I always will make sure that the sight is always points at that particular direction before pulling the trigger. Oh yeah .... I definitely would like to see how an airsoft will do :)
@@gordonsoo airsoft is great, but nothing compared to a real gun.
Why have mech potato been banned from shopee
They told me about that too, apparently they got mass reported by other competitors due to setting product price too low, so shoopee temporarily freezes their store saying saying that they are selling forbidden item.
Lizzie or stick with the rat?
The Lizzie for more after market mods and it can take talons if you know how to sand the interior , the Rat for the cool factor
hi about The Lizzy Gecko 2.0 is only 1 colour? i check shopee already got high price and low price?
Hi as far as I know there is only 1 color for now but there will be a sand color soon
hi :) which is better Lizzie Gecko 2.0 or ZWQ S200 Fire from your testing???
Hmm this is a tough choice, there is a lot of upgrade parts for this 2 blaster, but if you are not into modding the s200 performs very out of the box.
Hey Gordon I have been told it comes with a 6kg spring do you think it can handle a 13kg or should 11.5kg be ok?
Hmm, I am not to sure about it, but I am pretty sure it can definitely handle a 10, and I think you might be able to kinda pull it off with a 11.5
weird question but im left handed. Would the mag release/ bolt lock release be able to swap to the left side?
there is a screw hole on both sides, I assumed that it is swappable.
I was gonna say if it's not surely you could just drill it out to work on either side. My friend had an accidentally left handed 9mm he had to make fully ambidextrous because he's right handed.
Can you engage the bolt hold open without a mag inserted?
Unfortunately nope, but you can put in an empty mag then lock the slide and take out the mag :)
@@gordonsoo thanks but v 1 mags will still feed?
@@D2_mak_er yup it will still feed
Shell enjection) FEO S686 shotgun double barrel i found at shopee
Hi buddy can you make a video how to change the spring and make the gun output more powerful
I am planning to make a mod video for the lizzy, but currently I am still waiting for some parts to arrive :)
@@gordonsoo Any update on that sir?
@@gordonsoo Any update on that sir?
Is the handle better than the 1.0
Yup, Slightly better because of the extra coating
You should check out the shellington flypoint, shell ejecting, semi-automatic pistol with decent fps :D
Yeah, I am definitely interested to get my hands on one of those :)
Do you plan to any other mod guides?
Yes definitely
Yooooo would you make a video about the tti kit for 1.0? Just saw MP posting it on their fb and it looks sickkkkkk
I am looking into it too, in fact there is an on coming tactical kit coming it's way to make the lizzy looks like a mp7
@@gordonsoo my goodness i can't wait
hi soon Lizzy Gecko Blaster got new upgrade Kit and how to build upgrade can teach us?😁
i want see your show, upgrade kit Lizzy Gecko Blaster
Yes I will be doing a full lizzy upgrade kit soon
Is there another place I can get this? It won’t ship to me.
I just found one!
Is this blaster lizzie are not the privious one? But I see there a tactical rail on front one
This is an Updated version of the previous one
Ooo ok. Thx for info update on your channel
I got the 4.0
My magazine release lever doesn't go down smoothly sometimes, it looks like it gets stuck on something before coming down
If you're brave enough you can dismantle part of the blaster in order to access and dismantle the mag release lever. It is so springy once I assemble back the mag release lever. I even showed it to Mech Potato since they showed me another one of the blaster with the same non-springy issue.
Just be careful and make sure to slide out the plastic piece holding the 2 halves of the blaster together, right below the front barrel after removing all the side screws.
Did they license the design this time?
Ofc, no
Hmm.... as far as I know, I don't think they License it, but I am not too sure about it to be honest.
@@gordonsoo Yikes.
Did Edrien license it from CDPR yet?
@@ScumBunny THANK YOU. I always see people complaining about the design being "stolen", but the original Gecko is taken from Cyberpunk. So copying someone else's design and selling it is ok as long as it's some dude on Etsy but as soon as someone in China takes it and builds it for cheaper it's a problem? Bullshit.
just bought one
Haha hope you enjoy it :)
Bro mech potato also sell apex legend replica re45. Would you review?
Yes i will
Where get target
I got it from shopee malaysia which is a Malaysia online shopping platform, by the way where are you from ?
@@gordonsoo Australia c:
Cool toy👍
Yeap
Why don't you try glock 21 automatic, nice video anyway keep it up
oh, you mean the one with automatically ejects shells ?
@@gordonsoo yes, that it
Mod quite ?
I am still waiting for all the parts to arrive for the upcoming mod guide
Noiceee
keep puting out content
I definitely will :)
@@gordonsoo what happened with the awm?
@@cheese3708 Yeap I will be receiving it on Tuesday :) I will update the video release on the community post :)
@@gordonsoo woohoo
Man try buy this blaster it looks like shotgun from pubg
I’ve already made that video :) the blaster was excellent! feel free to check out the video.
I got the 4.0
Yeah i think there is a semi auto version
Nope its a springer with a slide release its only 10$ I broke my first one and bought another its not semi