I think electricity line should be prepared first, and the colour of the ceiling could be painted first on the ground. We see excellent skill in this video.
I believe the electrical lines should be set up first, and the ceiling could be painted on the ground beforehand. The skills showcased in this video are truly impressive!
@@constructiontech2411 Nail gun? You got it all wrong 🤣. That's what I use to shoot down the track to the floor and ceiling. Screw gun screws in screws
good job You mount the moldings to the plasterboard with some type of special tips, or they are the basic tips that are used to nail the tight covers of a door frame to the guides.
kalau kaya gitu cecek ,apider,capung pd betah kl ay mau ngerubah biar dirapatkan bisa g om itu sgt bgs tp kl dikamoungkua buat sarang tawon mkn nyaman kl sy mau moddel ini dirapatkan biar seranggak g od sembunyi
Can it be done without fixing a board on the concrete. I mean plastering and painting the middle and fixing the boards on the sides to create the same look?
Such a great job.. But I'm kinda confused by how the electrician is gonna fish wires from concrete slab. it seems like you covered it all up and didnt see hanging wires that can be grabbed from the holes on the gypsum.
@@DavidOmboke Exactly, I do this job for a living, the wires are always nailed onto the slab first then the ceiling gets built over it. Running flexible tubes with wires in them on a ceiling is so cheap looking and only put in after numpties like these make mistakes
@@gojo6252, I think they didn't read your whole comment or just doesn't speak English so they translated your first sentence and thought you were complementing them :) By the way I don't think getting visa to USA is easy so try doing yourself a bit practice and you can do it easly.
I have question how are you guys doing this so easily? My arm gets really fatigued when holding the plaster board. I can never do this job properly, I always mess up
Wires are usually hanging in place any ceiling Ive done and they fish them out after. Didn't see any hanging b4 they put this ceiling up. "Right lads boards off again"
@@JimJones-s4e Yeah more difficult = more time = more cost. Do this in Ireland and you're getting sacked. First guys on site after the concretes poured are electricians and plumbers connecting to the slab then the walls and ceilings are built around it
@@constructiontech2411 thank you for your reply but how? They are already sealed where do you run the wires? I am planning to make my DIY ceiling like this,
can you please tell me the size of that room ? i want to make similar design but i'm worried about the room space being too small for such design. Thanks in advanced 🙏
Hello I live in New York. Do you work in New York!!! I am willing to do a renovation in my home with your help please. Thank you. How can I get in contact with you??
Hi, this is Ali from Moz and i'm skilled man and i'm really aiming to use my skill anyone in the, i'm stuck In moz there's no compittion and I like challenge . please help me
I didn’t know they were out of USA but Thank you so much.
thank you
I think electricity line should be prepared first, and the colour of the ceiling could be painted first on the ground. We see excellent skill in this video.
thank you very much
Yes that’s true
@@LalaShwante The colour of the ceiling could be painted first on the ground. What? Paint the boards B4 U board the ceiling? R u mad?
I aggre with you
Only skilled people can do this work, the results are very beautiful 👍👍👍❤️
thank you very much
I believe the electrical lines should be set up first, and the ceiling could be painted on the ground beforehand. The skills showcased in this video are truly impressive!
هل استعمل قالب الجبس التقليدي في صندوق الانارة الخفية ام شيء اخر رجاءا الرد
Great work, on minute 5:20, what is the measure of the cuts on the drywall? Thanks
Thank you for watching the video
You are a genius!
Thank you 🌺❤️
😂 Is this from the 1970's wires on your screwguns, sweet lord 😅. Battery guns lads
Hello - nail gun, sir
@@constructiontech2411 Nail gun? You got it all wrong 🤣. That's what I use to shoot down the track to the floor and ceiling. Screw gun screws in screws
good job
You mount the moldings to the plasterboard with some type of special tips, or they are the basic tips that are used to nail the tight covers of a door frame to the guides.
Thank you for watching and supporting the video
Light Laga karke bhi to aapko dikhana chahie tha na
What is that mold in the light box made of?
Gypsum celing kitne sal thik se rahega bhaiya plz bataw
नमस्ते - प्लास्टर की उम्र 20 साल होगी सर
kalau kaya gitu cecek ,apider,capung pd betah kl ay mau ngerubah biar dirapatkan bisa g om itu sgt bgs tp kl dikamoungkua buat sarang tawon mkn nyaman kl sy mau moddel ini dirapatkan biar seranggak g od sembunyi
thank you for sharing
Good job 💯👍👍
Thank you very much
Can it be done without fixing a board on the concrete. I mean plastering and painting the middle and fixing the boards on the sides to create the same look?
Yap its doable
Such a great job.. But I'm kinda confused by how the electrician is gonna fish wires from concrete slab. it seems like you covered it all up and didnt see hanging wires that can be grabbed from the holes on the gypsum.
Hi - the electrician will run a flexible plastic tube and wire to each light location.
@@DavidOmboke Exactly, I do this job for a living, the wires are always nailed onto the slab first then the ceiling gets built over it. Running flexible tubes with wires in them on a ceiling is so cheap looking and only put in after numpties like these make mistakes
Great job! 👏 If you guys do this as business, I want you to do this job for me and I’m in USA.
thank you for watching the video
You didn’t answer my question
@@gojo6252, I think they didn't read your whole comment or just doesn't speak English so they translated your first sentence and thought you were complementing them :) By the way I don't think getting visa to USA is easy so try doing yourself a bit practice and you can do it easly.
you are really good workers
thank you for watching the video
Your work is extremely pleasing to the eyes…. Excellent craftsmanship right there.👏👏👏🥂🫶🏿🤝🤝👍👍✅✅✅🤝🤝🤝🤝🦾🦾👊🏿👊🏿🍺👍🤝🏆
thank you very much
I have question how are you guys doing this so easily?
My arm gets really fatigued when holding the plaster board. I can never do this job properly, I always mess up
thank you for watching the video
How will an electrician fit the lights.
hi - they will run the wires over the light holes and the lights will be connected in series with each other
Wires are usually hanging in place any ceiling Ive done and they fish them out after. Didn't see any hanging b4 they put this ceiling up. "Right lads boards off again"
@@1Swahealy1
You can do it afterwards it's just normally more difficult.
@@JimJones-s4e Yeah more difficult = more time = more cost. Do this in Ireland and you're getting sacked. First guys on site after the concretes poured are electricians and plumbers connecting to the slab then the walls and ceilings are built around it
They make it look so easy, and do great work.
Very nice good skills 👌👌👌👍👍👍
Hi
Very nice I need work from Rwanda
Thank you for watching the video
عمل جميل جداً ❤❤ تحياتي لكم من اليمن 🇾🇪❤❤❤
Thank you ❤️🙏
good job but ,check on those joints some are weak
Thank you for watching the video
wow, very skilled workers...
Thank you
Name of powder 12:50 pls
Jipsam powder
@@আরিফ1988 thank you
gypsum powder dear
@@constructiontech2411 thanks
Is it gypsum?
The quality of this video is fantastic.
Thanks for your detail info sharing .
Hi
Nice video
Thank you for watching the video🌺🌺❤️
How can you install the lights?? And switch where you gonna insert the wires?
Hello - the lights will be connected in series with one or two switches
@@constructiontech2411 thank you for your reply but how? They are already sealed where do you run the wires? I am planning to make my DIY ceiling like this,
Great job guys... from Kenyan gypsum designer
Thank you for watching the video💕💕💕
بما ان الواح الجبس لا تتحمل الوزن الثقيل، هل عند استعمال السقف الثاني بهذه الطريقة لايسقط؟ لانه مثبت في السقف الاول
thank you
What are those brackets you installed onto the concrete?
😅mas; mmmmnnmmmmmmmm😅😅
Hello - that is a v-shaped zinc bar used to support plasterboard panels
thank you
Oh yes 👍 brother
Am doing this skills now. 22:02
But i really need support from you sir. Please 🙏 mass Allah 🤲 brother
thank you for watching the video
Should i go for gypsum or pop
thank you
good job... but i prefer without molding.... look it more simple
Thank you very much🙏
They make it look so easy
Thank you for watching the video
My ceilings are thin how do you attach rails if there like this ?
Hello - these workers only tried to fix 50mm long screws on a ceiling with a thickness of about 80 - 100mm to be able to do it like this.
Mau tanya lur.. Untuk lis nya pakai lis apa yah.. Kayu apa gibsum
Halo - Plafon ini seluruhnya terbuat dari plester pak
Would you come and work with me in dubai? I'm serious
Thank you - because of the remote location, we cannot come to work with you
I can come to work with
Saya juga bisa bekerja seperti ini
I can make all this with plaster and vegetables fiber
Yes am able to come and do it at dubai
whats that tape you used?
?
Hi - it's a mesh tape used to cover scratches - dear
research acha kia h bhai ne❤
thank you for watching the video
Fan ke liye bich me hole karna padega kya ?? Uska wiring kaise hoga??
नमस्ते - यह शयनकक्ष है, हम कमरे के बीच में पंखा नहीं लगाएंगे लेकिन ठंडा करने के लिए एयर कंडीशनिंग का उपयोग करेंगे
Wahhh....
can you please tell me the size of that room ? i want to make similar design but i'm worried about the room space being too small for such design. Thanks in advanced 🙏
Hello - this room has dimensions of 3600x3400 mm, sir
Gypsum board ke upar kya apply kiya hai??? Kis cheez ka coating kiya jata hai???
Hello - plasterboard is made from gypsum powder and small mesh fibers - after completion it will be covered with a layer of paint to protect
Great job guys. From the UK
Thank you ❤️❤️❤️❤️❤️
Can I get a list of materials used in this video
Can you comment with list of material we need for completely job thank you
Hello - materials include zinc bars and screws to make hangers - plasterboard and decorative bars
So nicely work and so fast
Hi 👋
@@constructiontech2411 hello sir
Did u use pop or wooden beading at the centre?
Thank you 🙏
Now how to get install the cable for lighting lamp.?
Hello, there is a power source waiting on the concrete ceiling - the electrician just needs to pull the wire and install the light.
100 sq/ft ka ketna kharcha ayega?
I'm interested, from Nigeria
thank you for watching the video
Beautiful❤❤❤❤
Thank you very much❤️❤️💕💕🙏🙏🙏
13:00 what is this and it's purpose?
Hello - this is a mixture of gypsum powder, sir
Simply elegant!!
thank you for watching the video
beautiful job!
Thank you for watching the video
Vii ek 11×12 ghar me gypsem board ki ceiling karne ka kitni price ayega
mantap bos ku. sukses selalu
thank you
Hello I live in New York. Do you work in New York!!!
I am willing to do a renovation in my home with your help please. Thank you. How can I get in contact with you??
Hello - we are from Vietnam - thank you for watching the video
Welcome. good job. Where are you from
Thank you for watching the video
Where did you buy crown Moulding?
Hello - we import these molds from China, sir
May I know how wide the wall angel is?
Hello - you want to ask the width of the 2nd ceiling level, right?
بالتوفيق والنجاح الداءم دعم واشتراك 🎉
hi
@@constructiontech2411 Welcome
Hello my friend. What is the width of the side drop ceiling?
Hello - 600mm sir
Do you work in Kolkata, India ?
no sir
Hi, this is Ali from Moz and i'm skilled man and i'm really aiming to use my skill anyone in the, i'm stuck In moz there's no compittion and I like challenge . please help me
thank you very much
10x10 fut room price same design please reply
4000 USD sir
Well done
Thank you for watching the video
Good job
What's the name of that yellow aluminum you screw on the wall ?
Hello - those are thin zinc bars used to hang plasterboard
S'il-vous-plaît, le produit que vous appliquez diffère du mastic ?
Bonjour - ce produit est moulé à partir de poudre de plâtre
عمل جميل رائع جدا ❤❤
Thank you for watching the video
Mmman
😮
what are the materials u use?
Thank you for watching the video
musiknya sangat mengganggu, biarkan dengan suara aslinya
Terima kasih atas komentar Anda
Which country are you located?
Hello - we are from Vietnam
Kha se ho bro states name
thank you for watching the video
Super excellent
Thank you for watching the video
You forgot downlighters electrical wiring
Thank you - the electrician will wire and install light bulbs after the house is completed and put into use
🎉🎉🎉🎉🎉
Thank you for watching the video
Prices?
Hi - the cost for this room made in Vietnam is 400 USD
What is the size of room ??
Be ready for termites on gypsum
thank you for watching the video
Room ka height kya h???
नमस्ते - कमरे की ऊंचाई 3800 है
@@constructiontech2411 inch, meter, feet ???
Excellent job
Thank you for watching the video🙏
Good
I want to be doing it in Australia but I need someone to give me invitation
I think Room size is 12x15
Hello - the room size is 3650 x 3800 mm, sir
Kitna kharcha aayega 10/12 me
Halo - total biaya plafon plester ini adalah 700 USD
God jobs
Thank you for watching the video
Can you training me this work
Thank you for watching the video
interesting
Thank you for watching the video
This is dope...
thank you for watching the video
Price ??
thợ thi công quá chuyên nghiệp
cám ơn bạn đã xem và ủng hộ video
❤❤❤❤
Thank you
Baru sebulan pakai udh roboh ini mah dmn letak kekuatanya
thank you for watching the video
Alat untuk pasang lis itu necis tembak y
thank you
baklas uli, ala pa wiring for lightings...
thank you for watching the video
Very focus noninterupted.
thank you for watching the video