Druckerchannel-Refill-Workshop Brother-LC1100-Patronen (english subtitles)
HTML-код
- Опубликовано: 20 окт 2024
- Bitte verwenden Sie nicht die Bohrschablone, sondern gehen Sie nach dieser Anleitung vor:
www.druckerchan..., um die Brother-Patrone LC-1100 zu befülen.
Brother war einer der letzten Hersteller, der Patronen ohne Chip anbot - Die LC-1100 ist zum Nachfüllen besonders gut geeignet. Druckerchannel zeigt, wie man die Original-Patronen LC-1100 schnell und einfach wiederbefüllt.
These can be very easily refilled using a normal syringe with a "cannula" style tip by creating a vacuum inside the cartridge. Good idea to pop the spring loaded part off though to clean up excess! Thanks for that tip!
Wirklich sehr gut, wunder, dank Kumpel.
These cartridges use a light detector to detect the presence of the ink level indicator in the clear window between the valve and ink exit.
This stops the printer working because the cartridge is "empty" when in fact it isn't empty at all!
You can fool the detector by putting a small amount of tape (or use a black felt pen) on the sides of the clear section of plastic.
@Druckerchannel
Hello! I just tried refilling the cartridge through the air ventilator just as danylokosenko proposed.
And it works =D
Simple and clean ...without using a drill and without breaking the whole plastic thing!
Actually one don't need to drill anything. It is possible to refill this kind of cartridge through air ventilation (just use a syringe w/o needle and press the other flap to avoid overpressure). I did it NOT ONCE, it works!
there is also no link to the drill pattern and no way to do this without it or without the chance of drilling in the wrong place
can you refill starter cartridges just the same or are they different? Like will they correctly refill and does the printer recognize them as starter cartridges or does the printer see them all the same?
Hallo, wo kann man den diese netten schraubdeckel von der nachfülltinte nachkaufen und wie nennt man diese deckel wo man mit der nadel reinstechen kann ohne das die tinte raus läuft?
@Druckerchannel uh what new workshop the newest one for the brother refill cartridges? i would rather do it this way than to take it apart...
@piersicutza20
Hi piersicutza20,
thank you for your feedback. The refill workshop for the Brother LC1100 cartridges now has English subtitles.
Kind regards,
Florian
Well, it worked for me! So many thanks for your upload. I just had to hope that I was drilling in the right place... I managed to fill all four cartridges so it can't have to be that precise(?) Maybe I was just lucky... I also found it far easier to put the springs on the spikes first... it is not that difficult really... but thanks once again.
Die Patronen sehen aus wir die LC980BK Patronen..die Stelle für das Bohren ist das die gleiche ?
one last question, does this same exact method work for the LC61M?
when you drill that hole, thinking maybe i can put my ink tank with tubes in it? is it possible?
Wo ist die Patrone in Drucker
@piersicutza20
yes, the lc980 are the same cartridges with the differece that the LC980 contain less ink.
on our website we show you how to use the LC1100-cartridges in a Brother printer that only uses the LC980 cartridges.
Just search for "Reichweite Erhöhen" on our site in the upper right corner.
Click on "Die Tintenpatronen"
Look for the picture with the two Brother cartridges and the arrow.
@danylokosenko my local refill shop said that it is impossible to refill lc38/lc1100 original cartridge
Hi danylokosenko,
thank you for your useful hint. We'll try this next time we refill the cartrdige!
Best wishes,
Florian
Druckerchannel.de
it is impossible to refill original cartridge
I think you mean holes Tony lol, but I completely agree with you, only wish I had seen your comment first before I eventually worked it out!...
please help me brother j100 I have a problem when I print my brother printer takes a lot of time to print and at last does not print and say (error the printer could not print the word document)n please help me solve this problem please
Warum diesen Aufwand betreiben...
Ich habe mich auch immer über die Rest-Tinte in den Patronen geärgert... Diese lässt sich problemlos über über das Auslass-Ventil absaugen und wie ich zu meiner grossen Überraschung, so auch in eine andere Original-Patrone einfüllen... Einfach den Schieber abnehmen, wie im Video, Spritze ansetzen, Entlüftung drücken und Absaugen. Zum Einfüllen das ganze Rückwärts, sollte auch mit Fremdtinte funktionieren oder...
es geht nicht nur um den Preis der kompatiblen Patrone. Wer gute Tinte will, muss entweder die teuren Originalpatronen verwenden oder gute Markentinte kaufen und selber befüllen. In den Billigpatronen für 50 Cent kann nur "Müll" an Tinte drin sein.
Hallo MegaBasti1991,
Heißkleber scheint mir hier am Geeignetsten.
Gruß,
Florian Heise
Re- assembling:: Better to fit the springs to the spikes in the lid first ,Then it is easier to locate the springs into their respective wholes in the Body
Buenisimo, una manera de ahorrar dinero cuando tienes que imprimir mas de mil copias, ademas protejes el ambiente porque no tienes que botar tantos cartuchos. Yo no lo abri con un drill, use una aguja caliente y por ahi injecto la tinta.
This is a very complicated way to do a simple refill. Look on RUclips for videos like....
"Refill brother LC61 original (BK, C, M, Y) easy"
Same idea and works nicely. Don't forget to wear gloves and to be sure of the quality of ink you purchase.
does it work with lc38 ink cartridges
Diese Patronen muß man wohl garnicht reseten?
nein, die haben keinen Chip - siehe hier: www.druckerchannel.de/artikel.php?ID=2678&t=workshop_brother_lc1100_und_lc980lc985_patronen_befuellen
@Druckerchannel
An Herr Florian Heise
Ich möchte mich bei ihnen herzlich bedanken für ihre antwort !
Es geht nicht nur um Druckqualität - in erster Linie kann man mit der Billigtinte den Druckkopf zerstören oder durch die häufigen Reinigungsvorgänge den Resttintenbehälter füllen, was zu einem verfrühten Druckertod führt. Siehe dazu auch unseren Artikel über "geplante Obsoleszens" bei Druckerchannel.de
@pitchit89
just fast forward the video to 7:27 and watch the english subtitles.
Kind Regards,
Florian
Hi armegedon1903,
You are right. It is much easier to hold the cartridge upside down while removing the cap.
Best Regards,
Florian Heise
Druckerchannel.de
you can use the cartridge again. Just scrape off the hot glue and refill the cartridge.
An easier way to refill the brother cartridge you'll find in the link in the video description.
Gutes Video, hab auch was feines gemacht :)
Can the ink be refilled ni BROTHER DCP JI4OW?
@Thevetteran
Please don't use the drill patterns. You'll find our new refill workshop here instead: druckerchannel.de/artikel.php?ID=2678&seite=3
@JMvideobearbeitung
Bitte schauen Sie sich unseren Refill-Workshop auf Druckerchannel zu diesem Patronentyp an. Suchen Sie dazu einfach nach "LC980" bei Druckerchannel.de.
Gruß,
Florian Heise
Thats Work, Thanks!!
@ongchorcool
It is possible - just have a look at our refill workshop at druckerchannel.de (search for LC1100).
Kind regards,
Florian
@TheChickenrun3
Please don't use our drill pattern. Have a look at our new workshop which you'll find at our website druckerchannel.de in the top menue "Artikel" - "Workshops". You can use the google translation for our article in german.
Kind regards,
Florian Heise
Druckerchannel.de
Good job ,i just have problem about this .
@pch01
bitte verwenden Sie unseren aktuellen Refill-Workshop für diese Brother-Patronen, den Sie auf Druckerchannel.de im Bereich "ARTIKEL" - "WORKSHOPS" finden.
Gruß,
Florian Heise
Como recargar cartucho brother mfc-j6730dw
@MrGrantelbart
Gar nicht - schauen Sie bitte unseren neuen Workshop bei Druckerchannel an: Druckerchannel.de - Artikel - Workshops
Gruß,
Florian Heise
@ongchorcool OK, thank you, now I know that every month during last year I manage to do impossible thing.
Hi acooarioom,
HERE COMES MY ANSWER!!
The answer ist following...
....
now:
YES, YOU CAN!!!!!!!!!!!
This was my Answer!!!!!
OVER AND OUT
Kind regards,
Florian
@lastlines09
Bitte nicht die Bohrschablone benutzen. Beachten Sie bitte unseren Workshop auf Druckerchannel.de.
Hey!!!!!!!!!!!!!
Those who can't be bothered to get a hot glue pistole can use candle wax instead!
Methode nur für den Profi mit Erfahrung!
Gut gemeint, aber für normale Anwender nicht zur Nachahmung empfohlen. Ich finde diese Anleitung für den Laien (Nicht-Profi) nicht hilfreich, sondern extrem gefährlich.
Man sollte wissen, was man tut. Hier arbeitet jedoch man ins Ungewisse hinein!
Beachten bitte Sie auch, dass die Seitenflächen des inneren Patronenkörpers aus dünner Folie bestehen, die leicht mit einer Kanüle durchstochen werden kann.
Hier ist eine große Schweineriei vorprogrammiert!
proszę tylko pamiętać że stosowanie tuszy regenerowanych to jawne złamanie warunków gwarancji
Haha...I can refill the cartridge without removing the front cover and drilling the cartridge...thnks to simple tutorial by mipohk...
I forget to say Gracias.
Or you could buy one for $3.
Or refill for pennies 😊
Wie um Himmels willen soll man die Schablone ausdrucken wenn man keine Tinte in den Patronen hat !
Cool
Actually one don't need to drill anything. It is possible to refill this kind of cartridge through air ventilation (just use a syringe w/o needle and press the other flap to avoid overpressure). I did it NOT ONCE, it works!