Don't have one but, that is sickkk. You can guess the reason is that it's intentions are to be rackmounted and have units stacked literally right on top of it.
Yes I have one, and have been thinking about doing this since I saw a video from RUclipsr CNminer in June 2022 about putting four 120mm fans on the heatsink. It worked well for them, but I had already made a "silent box" for my Jasminer, so I am not in a rush to lower the sound, but I will do this to get rid of the box and still be silent. Thanks for your video! Your endresult was very nice :) I will order the black version of these fans instead of the brown ones ;) I have not decided if I should go for the 15mm to get the sleak look, or go for the 25mm and having them sticking up a bit through the top cover.
Okey I did mine yesterday. I went for the black version of the 120*15mm Noctua fans ;) I also have 257W consumption on 235V 👍 It was 287W with the stock high rpm fans. All ok now, just one thing, the Jasminer PSU fan is loud (did not hear it before..) So I might swap that one to some day.
I know it's an old video, but helped me out, so thank you. I purchased a used one for a great price, but was just too loud. Mine is running at 51c, but that's maybe because I just have it open now, still need to customize the top part with fan cutouts.
If you don’t have small kids man just leave it open if you want or you can just cut cardboard over it and tape it on and it’ll work fine! But thank you for watching 🙏🏻
@ChumpChangeXD yeah no small kids and it's in the garage. Probably just going to leave it open. Just was concerned that it was running at around 52c, where you had it at 42c, but think should be fine. Fans are coming in around 1600. Btw, you are a master diy'er.
Legend. Patient your solution before they integrate it. Jasminer should be giving you free sponsorship after this. Nice one brv. (I bet your 4 noctua fans are cheaper than the 8 delta fans used and easier to replace when/if they die.)
FANTASTIC RESULTS!!!! Your Fan Solution is Elegant and Blows me away how much quieter - such a HUGE Improvement. Love the DIY Stuff- Keep it Coming ChumpChangeXD
good stuff. I have been looking at those jasminers but they are still a little expensive. Good to see you got it quiet and keeping cool. When I ran some asics they got pretty loud
What did I think? ha Mate, you just reminded me why I started following you in the first place, great solution, well done troubleshooting those fans and yeah, Noctua colours, I to date have no idea 🤮
@@ChumpChangeXD not really because your new air flow is coming from the top now and not the back. Originally it was coming from the back to the front or front to the back. Now it’s coming from the top now to the front .
@@DiyintheGhetto but yes because the air is now going to be exhausted through the slots in the machine from front to back. Having fans in the way will create friction and restrict the fans that are now doing all of the work. This will in theory burn them out faster than normal…
Awesome man, great work!!!! I have the same two U4's placed under my home due to the piercing whine from the fans, they are too much! I do not like Noctua brown either, so could they be painted, h yea. I will paint mine without taking them apart by sliding paper under the fans
Do you have a Jasminer X4-1U? Did you think this was as impressive as I did? This should have been built like this from the beginning!
Don't have one but, that is sickkk.
You can guess the reason is that it's intentions are to be rackmounted and have units stacked literally right on top of it.
Yes I have one, and have been thinking about doing this since I saw a video from RUclipsr CNminer in June 2022 about putting four 120mm fans on the heatsink. It worked well for them, but I had already made a "silent box" for my Jasminer, so I am not in a rush to lower the sound, but I will do this to get rid of the box and still be silent. Thanks for your video! Your endresult was very nice :) I will order the black version of these fans instead of the brown ones ;) I have not decided if I should go for the 15mm to get the sleak look, or go for the 25mm and having them sticking up a bit through the top cover.
Okey I did mine yesterday. I went for the black version of the 120*15mm Noctua fans ;)
I also have 257W consumption on 235V 👍 It was 287W with the stock high rpm fans.
All ok now, just one thing, the Jasminer PSU fan is loud (did not hear it before..) So I might swap that one to some day.
Good job @ChumpChangeXD taking one for the team!
I'm going to attempt mine tomorrow...
Lol... DO IT!
Just did my fan mod. Different fans, but same results. Super quiet and keeping cool. Ty!
Congrats my man!!
I know it's an old video, but helped me out, so thank you. I purchased a used one for a great price, but was just too loud. Mine is running at 51c, but that's maybe because I just have it open now, still need to customize the top part with fan cutouts.
If you don’t have small kids man just leave it open if you want or you can just cut cardboard over it and tape it on and it’ll work fine! But thank you for watching 🙏🏻
@ChumpChangeXD yeah no small kids and it's in the garage. Probably just going to leave it open. Just was concerned that it was running at around 52c, where you had it at 42c, but think should be fine. Fans are coming in around 1600.
Btw, you are a master diy'er.
@BorisXgen good stuff brotha! Appreciate you. Good luck!
Legend. Patient your solution before they integrate it. Jasminer should be giving you free sponsorship after this. Nice one brv. (I bet your 4 noctua fans are cheaper than the 8 delta fans used and easier to replace when/if they die.)
FANTASTIC RESULTS!!!! Your Fan Solution is Elegant and Blows me away how much quieter - such a HUGE Improvement. Love the DIY Stuff- Keep it Coming ChumpChangeXD
That's unbelievable, especially because you can now put it in the living room to heat it up when it's "quiet".
Great Video! Id love to do this! Sadly it won't be as nice as yours lol. Way to Go!
Awesome mod, love this type of videos, look forward to more.
Wow that’s awesome 👏 truly great idea .. I think I’ll have a 3D shroud made to support this .. thanks for the awesome idea 💡
good stuff. I have been looking at those jasminers but they are still a little expensive. Good to see you got it quiet and keeping cool. When I ran some asics they got pretty loud
🔥🔥🔥🔥🔥🔥🔥🔥.......can someone send this video to jimple mining so they can take note on how it should be done
Haha 😂
They did put big silent fans on the X4-Q miner :)
Great job!
Should be a new Misfit Mining product..
If it looks stupid and it works, it's not stupid. Well played!
Glad it all worked out. Good job as usual
I just burnt a hash board the other day putting Noctua fans on a L3+ Lol! I've got Costal Crypto repairing it now!
Oh No!
Love this mod bro....great work
Thanks brotha! It’s still working to this day!
This is way batter then the original server fans...
Why not use a suitable replacement? 10 units of Noctua NF-A4x20 5V PWM
Have you done a RAM upgrade ? or some means of mining ZIL on the JAS?
Are your fans pulling the hot air out or blowing cold air down? thanks !!
Down onto the heatsink
So did you end up screwing down the noctuas I tried but the screws that come with the fans aren't long enough which ones did you use
Did you ever get "temp alarm, invalid temperature" and no hash rate after changing the fans?
Great project!
what do you preffer? Artic or Noctua?
after using noctua. does it reduce the noise of jasminer x4 1u?
Yes it’s literally almost silent
I tried a 3000rpm 120mm fan, PWM, but it doesn't turn, the system reports an error
What did I think? ha Mate, you just reminded me why I started following you in the first place, great solution, well done troubleshooting those fans and yeah, Noctua colours, I to date have no idea 🤮
Noctua fans look sexy!
not for nutn but I think you voided the warranty... haha
LOL oh for sure
it's great bro
I’m going to perform this mod if @rabid will let me lol
Hey Chump man, You could of just left the fans in there and just disconnected them.
It will just impede the air flow so I removed them
@@ChumpChangeXD not really because your new air flow is coming from the top now and not the back. Originally it was coming from the back to the front or front to the back. Now it’s coming from the top now to the front .
@@DiyintheGhetto but yes because the air is now going to be exhausted through the slots in the machine from front to back. Having fans in the way will create friction and restrict the fans that are now doing all of the work. This will in theory burn them out faster than normal…
@@ChumpChangeXD true. But also having slower RPM fans won’t push it out any faster then the original ones because of the pressure.
Awesome man, great work!!!! I have the same two U4's placed under my home due to the piercing whine from the fans, they are too much! I do not like Noctua brown either, so could they be painted, h yea. I will paint mine without taking them apart by sliding paper under the fans