Buen video tutorial. Salvo que en los ht12 el transmisor siempre tiene que estar encendido para enlazar con el receptor y despues codifica y decodifica en sus 4 canales.
And in the pins you connect 50-100kQ resistor, if we connect the pins with wire than output voltage will be increase? So can be use motors in place of 4 leds? Please tell
Bro, i have tried this same but it will work only when we connect the both data pin with wire plz. Tell is the antenna is necessary pls bro iam your big fan
I maked this but transmitter and receiver , can't received ,totally I connected perfectly but in reaceiver foure lights are blowned when I connected to transmitter with battery not worked what's the problem
@@vadlavenkatachary6473 I use 5v. 1 Mega ohm for Transmitter 33k ohm for Receiver. Working perfectly. Also, I soldered antenna to both modules. If you searched on google with key word "ht12e voltage" it will return this: "at 5V VDD and has high immunity against noise".
i have problem with the reciever circuit idk why all the light turn on even i push any button of the transmitter nothing happened ... do i need more voltage for the transmitter ?
@@estechknowledge esa koy module he jo 500mtr tak work kre without Arduino apne jo circuit bnayi he usi trah sirf module long reng ka milta he to please🙏🙏 btaye
Hi, I tried preparing similar circuit. But I am facing issue. 1. When I connect receiver side(transmitter off), its indicator light turns on and other output LED remains off. 2. When I turn transmitter on, indicator light turns off and all 4 output LED glows. 3. When I press any switch on transmitter, respective Output LED turns off. ( Circuit is performing opposite manner). Can you please help me to know what is going wrong in my circuit?
@Ashutosh Jha nahi sir mera circuit work nahi kar raha mene rf module ko alag se test kiya par buttan press karne pe koi bhi led par koi action nahi ho raha 😥😥
Hi could you put the link to buy the board for the transmitter and receiver on amazon please? And if you can ... could you make a video where instead of the leds ... you can put the relays ... so that when you send the input to the relays it stays on?
It's neat and clean, that is why I liked this circuit soo much...❤️
Ok
Broo your teaching idea is very easy.
Buen video tutorial. Salvo que en los ht12 el transmisor siempre tiene que estar encendido para enlazar con el receptor y despues codifica y decodifica en sus 4 canales.
Please Sir by powering both the transmitter and receiver with 4.2v lithium ion battery, Is the range 100 meters ?
Yes it will work but in the open places
@@estechknowledge hello bhai
Thank you so much 🥰 ........
I am soo confused that how i do this
Its very clear video and simple circuit.. Keep it up..
Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?
Can we use this for making rc plane from l293d and with rudder and a corless moter what is range with ant
No
This can be use to control cars.
but it will become very hard to make a rc plane with it.
Bro can we add throttel to it
Also bro can I make this circuits that you used with my self (the transmitter and receiver boards) or I should buy it?
you are really creative
And in the pins you connect 50-100kQ resistor, if we connect the pins with wire than output voltage will be increase? So can be use motors in place of 4 leds? Please tell
Yes
Bro, i have tried this same but it will work only when we connect the both data pin with wire plz. Tell is the antenna is necessary pls bro iam your big fan
Bro can we make sattelite commnunication
Bhai agar Mai same isse tarah se connection kare to work karega
Jab light ki jagah motor laga de
Plz batawo bhai
Boss can u make the 12 channel signal transmitter and receiver please
Very nice 👍, please let me know can we use 36 mili volt supply in place of on off switch
How much maximum current can we use for the module?
Can you press two buttons at the same time?
Offcourse
Bro what happens if we push two buttons together do both signal goes.or I goes one at a time
Both work together. Even if you press 4 buttons together then 4 LEDs will glow together.
Sir, can you please tell the range of this circuit... 🙏🏻🙏🏻🙏🏻
Around 50 meter
@@estechknowledge goodknowledge
@@estechknowledge mool
50 meter😂 Not possible
How to create interference to a hifi (mine obviously....) with a 433 mhz module?
Sir RF modul to esp8266 ka program he aapke pas
shall we use it for Toy Car / Toy Excavator?. how to connect with motors?
I maked this but transmitter and receiver , can't received ,totally I connected perfectly but in reaceiver foure lights are blowned when I connected to transmitter with battery not worked what's the problem
You need resistor whenever you put LED into the circuit. This circuit is 5V.
Did you use 9v battery?
@@jumbo999614 3.7 volts ,both r and t worked but their transmission is not possible no working
@@vadlavenkatachary6473 I use 5v.
1 Mega ohm for Transmitter
33k ohm for Receiver.
Working perfectly.
Also, I soldered antenna to both modules.
If you searched on google with key word "ht12e voltage"
it will return this:
"at 5V VDD and has high immunity against noise".
bro can i use forwars reverse switch
Can i run 5v dc motor on this circuit
Can I put motor in place of led
Thats awesome. Hope I can make it too.
Circuit diagram please
Is the resister is really needed🤔
Can we use this circuit to control two motors
can i ask what is called to those conncting wires?
the metal ones
What is the range none line of sight and line of sight
Can I use this transmitter and receiver in usb device like mouse , keyboard,etc
very helpful
Sir me ise wireless charger banane ke liye use kar sakta hu
No
So much of hard work
Yes👍👍👍🎉🎉
Distance range kya hai iska
can any one tell how to drive dc motors in this circuit? 4 channel remote how to solder?
In place of the 4leds which were off unitl he pressed the button,connect the dc motors in place of leds and test
@@shashankg1006 no it will blow the circuit.
kindly use proper transistor of mosfet in series with the motor to operate
Ht12e ic price???
Around 50 rupees
Very good bro.
Led ke badle motor use kar ne se hoga kia
issme se rc car chala skte hai?
can we use 10 buttons instead of just 4?
Yes
But we have to use 2xArduino
@@estechknowledge why is that? Any workaround for that?
Sir, how can i get tht antenna?
just take a copper wire of length approx 18 cm and use it
Bhai yah Sara Saman tumne kaha se kharida hai
Mostly online
सर ईस सरकीटसे टोयकार चला सकते हैं या फीर दुसरा सरकीट बनाना पडता है धन्यवाद
hello can we use both side 3.75v cell reachable
can use in rc car
and without L293d ic use its work.??
If you are looking for this - ruclips.net/video/U6rAmq9_yUs/видео.html
@@estechknowledge no no its so hard
Why does it remains on till you put current in the transmitter
its working in underwater ?
How many distance this remort work.i mean its range.tell me please
About 100 meter
Where did you get your modules from and are they any good all the China ones I have purchased are crap, short range
Transmitter and receiver check sahi hai ki kharab
can you show us whats thath programe you wrote
In place of 100-3300 resistor can be use 100k ohm resistor means bulb will not fuse
Sir mujhy is module ki zrurat ha ya amazone Pr ha Lakin ya Pakistan k address Pr nhi araha ap koi treeka btain
It work for motors?
Can I get the circuit diagram with connections please..
Sir iske reciever se motor ka connection kaise krengee
Pls help me
Anybody
This will help you to understand - ruclips.net/video/hKuLJNzlPpA/видео.html
How can increase control range?
Wireless distance???????????
How much Metre
About 40 Meter
Sir, can you tell me the name of all parts
Sir esma ic sa output kitna volt deta hai
Around 2V
i have problem with the reciever circuit idk why all the light turn on even i push any button of the transmitter nothing happened ... do i need more voltage for the transmitter ?
Had the same problem with bad quality breadboard. So I soldered it. Now it's working fine.
Did you find the solution?
@@jumbo999614 yea I found it it's like there is problem in my connection and my 5 volt regulator but it's work fine now
How to drive two DC motors instead of 4 LEDs
Use a motor driver - l293d or l293n ..just checkout datasheet ..connections are very easy for it
Thanks
Dose it work for drone ??
What is the range of this circuit ??
About 100 meter
@@estechknowledge esa koy module he jo 500mtr tak work kre without Arduino apne jo circuit bnayi he usi trah sirf module long reng ka milta he to please🙏🙏 btaye
Hi, I tried preparing similar circuit. But I am facing issue.
1. When I connect receiver side(transmitter off), its indicator light turns on and other output LED remains off.
2. When I turn transmitter on, indicator light turns off and all 4 output LED glows.
3. When I press any switch on transmitter, respective Output LED turns off. ( Circuit is performing opposite manner).
Can you please help me to know what is going wrong in my circuit?
You just need to connect the negative side of the LED with the IC and positive side together with VCC/+5V
@@estechknowledge Ok Thank you. I will try and let you know if I face any issue.
Kya ishe Quadcopter me use kar shakte he
Yes
but that would be very complex.
@@estechknowledge thanks you sir
@@estechknowledge app ek or video banai jisme ishka upyog karke ek Quadcopter banai sir , please
how to programe the ic you use
This ic does not require any program
I love that
Sir can we use for drone this circuit
No
how long range
Can you make rc car with this circuit please. Left right front back 4 channel.
Amigo tem como fazer codificado ou seja com controle único pra cada circuito
Hi sir in receiver circuit after connecting of transmitter than also all the five led are glowing why what is the fault in the
Check the LED's positive and negative connections once again.
Sir mere circuit ki led continuesli glow kar rahi hei jab tak botton nahi dhabao please help me😔😔😔🙏🙏
@Ashutosh Jha nahi sir mera circuit work nahi kar raha mene
rf module ko alag se test kiya
par buttan press karne pe koi bhi
led par koi action nahi ho raha 😥😥
We can use for drone
No
can I use remote control in my car
This video might help you - ruclips.net/video/U6rAmq9_yUs/видео.html
Dear sir kindly I request to you music is not required pinout number indicate and your voice is important thanks.
12v battery can use it bro
Good
tell me about audio transmitter and receiver 🙏🙏
I made this circuit on breadboard and it's not working at all :( can anyone please guide where could I be going wrong
What power supply you have used
Right this is not working
What's the range bro
Kitna km ka range hai
Renge kitni he bhai
Can I ask if what are the value u use in Ic, transmitter, and receiver? Thank you
I didn't understand what you asked for
Encoder ic 12 E and decoder ic 12 D use this circuit..
If you speak and teach us how to make it that's more understandable.
Bro how to operate motor to using this circuit because i make rc car so how to use this circuit in rc car
How to connect two motors instead of 4 leds
That's what I want to do too.
Ism motor kh s connect hoga
👍👍💪
Bhai kaha se buy kiye Ho please batao
I bought it from Amazon
Hi could you put the link to buy the board for the transmitter and receiver on amazon please?
And if you can ... could you make a video where instead of the leds ... you can put the relays ... so that when you send the input to the relays it stays on?
OK
@@estechknowledge Grazie mille ;)
Bos puwede po ba ako mag pa assemble ng ganyan. Transmitter at reciver. 12v type
If we want to expand the signals what should I do
Use stx882 transmiter and reciever module (range uoto 100m)
what is it range
Kiya is per audio Kese chalega ji