Fitting the Subfloor | VAN BUILD SERIES Ep11 Sprinter Van Conversion

Поделиться
HTML-код
  • Опубликовано: 25 май 2024
  • Today we are finally able to fit the sub floor! We've decided to go with the no screw down method to avoid any more holes in the van! Let us know what you think 😀
    We hope you enjoy this video. Thank you so much for watching. Don't forget to like and subscribe so you don't miss any of our uploads 😊🚐
    Products we used:
    12mm Plywood www.diy.com/departments/hardw...
    Gorilla Wood Glue amzn.to/3VeCMJl
    Bosch Router amzn.to/3wFIIln
    Ways you can support our channel:
    Amazon Wishlist 💫 www.amazon.co.uk/hz/wishlist/...
    Buy me a coffee ☕ www.buymeacoffee.com/lydiacook
    🔴 Subscribe for more videos like this: tiny.cc/LydiaCook
    🎬 Check out my most recent videos: bit.ly/LatestLydiaCook
    📷 Instagram / lydia__cook
    📷 Instagram / philandlyds
    Camera equipment we use:
    - DJI Pocket 2 Vlog Camera click.dji.com/AMvBtKDQrIANHcA...
    - DJI Mini 3 Drone amzn.to/4bqI8qO
    - DJI Mic 2 amzn.to/496ZfNa
    - DJI Osmo Action 4 amzn.to/3uXdEfK
    - Sony ZV-1 Camera amzn.to/3qgDbJV
    - Amazon Tripod amzn.to/3ukmT9y
    You can find all our social media accounts here linktr.ee/lydiacook
    The links above are likely to be affiliate links, which means if we have inspired you to make a purchase and you choose to buy something through one of these links, we may receive a small commission on the sale, as a way of thanks! This is at NO extra cost to you 😊
    #sprintervan #vanconversion #vanbuild

Комментарии • 11

  • @markymarks3805
    @markymarks3805 22 дня назад +1

    Hi guys, nice vlog, I don’t know how far along you are in relation to this vlog, I have a kitchen that overhangs the step, I built the kitchen in 2 sections, 1st section along the wall, fixed to the floor and the wall, and a second module that covers part of the sliding door that overhangs the step, fixed to the floor and the 1st section of kitchen, the idea is if I ever need to get to the door mechanism the overhang kitchen module detaches and will come out without destroying the whole kitchen, it leaves part of the worktop floating but I can work around that. I see so many build vlogs with overhanging kitchen built as one long unit. Just thought I would comment. 👍

    • @PhilandLyds
      @PhilandLyds  22 дня назад +1

      Hi Mark,
      Thanks for the comment. We hadn't thought of that really so we may have to incorporate that into our build! It's coming up to that point soon as well so the timing was spot on! 👍
      Cheers for the advice and thanks for watching.

  • @Rags2Pitches
    @Rags2Pitches 21 день назад +1

    Great to see this! Will will be on to our subfloor soon! X

    • @PhilandLyds
      @PhilandLyds  21 день назад

      Good luck! Thanks for watching :)

  • @johnpatterson5744
    @johnpatterson5744 22 дня назад

    Well done.👍

    • @PhilandLyds
      @PhilandLyds  22 дня назад

      Cheers John! Thanks for watching 👍

  • @stevewaslin7171
    @stevewaslin7171 21 день назад +1

    Just a bit of advice when using the router you should have the cut edge at your left side. Triger hand away from the wood.

    • @PhilandLyds
      @PhilandLyds  21 день назад

      Thanks for that, I will remember for next time. What is the reason for this?

    • @stevewaslin7171
      @stevewaslin7171 21 день назад

      It’s the rotation of the blade it’s gives a better cut and going the other way blunts it.

  • @tamimahasan5209
    @tamimahasan5209 18 дней назад

    Hello, I saw that your content quality and Thumbnail is also good. But, your channel is not Growing. Then, I analyzed and I saw that in your channel have some problems. That's why your channel is not growing. Mainly, you are not reaching to your targeted peoples, If you can solve these problems your channel will grow like a storm. Can I tell these problems? Can I tell here? Are you allow? And how are you? can I tell here? Are you here? I can saw to you!!