I want to compliment you for creating the nicest electronics enclosures in a consistent way that seem to breathe (and shine) love and craftmanship, design and simplicity all at once. You only needed a small number of projects to get to this consistency and you play with colors and hand-written labels in an elegant way. Kudos!
Thank you so much for sharing your experience ..can you make it with 2 channels and with higer range of 500khz like2000khz or more .keep going on ..good luck I hope to yourself.bless you
This is a very interesting project that I would like to replicate. But I'm having problems integrating the necessary libraries. Can you please help me to insert the necessary libraries into the Arduino IDE?
Hello, the library and also gives a compilation error. This is in the case that these two libraries are in place. Please advise But Adafruit_GFX.h and Adafruit_ILI9341.h compiling. But the image is not wide and complete
Can you make one that can 1MHz? I've heard it can do 14 mega sample per second. Can it be used it at 1MHz? Maybe using a another module for display so less pressure and fast response on main board?
In the schematic I can see a diode connected to 3.3V, is it the same 3.3V from STM32 board? Also can you specify the voltage range that the oscilloscope can measure.
Yes, 3v3 from the board (STM32) . To protect the microcontroller, the input voltage must not be higher than 3.3V. For higher voltages a simple voltage divider should be added
3:22 No puedo identificar el componente que se encuentra atras, veo que lleva cableado al switch de encendido y a la placa de arduino, que componente es ?
I want to compliment you for creating the nicest electronics enclosures in a consistent way that seem to breathe (and shine) love and craftmanship, design and simplicity all at once. You only needed a small number of projects to get to this consistency and you play with colors and hand-written labels in an elegant way. Kudos!
Thanks a lot :)
A very beautiful basic oscilloscope. 🥳 This is a great oscilloscope to add to an audio project. 😎 Thank you.
Klobouk dolů. Výborné.
Thank you so much for sharing your experience ..can you make it with 2 channels and with higer range of 500khz like2000khz or more .keep going on ..good luck I hope to yourself.bless you
Why does the video say 500MHz at the beginning?
Is it possible to make 2 channel oscilloscope using ESP-32?
I'm also waiting for a response for this question
Sir, you make very good videos.❤❤❤❤❤ Please tell me, can this oscilloscope be made in Arduino uno also?
Yes, but with a much smaller range, around 20-30KHz
very good project thanks for the code , i made it and work fine...i hope i will find another good your project for me, thx again bravo
This is a very interesting project that I would like to replicate. But I'm having problems integrating the necessary libraries. Can you please help me to insert the necessary libraries into the Arduino IDE?
Very nice project, Thanks
Hi from Brazil, first all thank you so much for this project, but how is the maximum voltage we can achieve ?
Only voltages from 0 to 6.6V
Hello, the library and also gives a compilation error. This is in the case that these two libraries are in place. Please advise
But Adafruit_GFX.h and Adafruit_ILI9341.h compiling.
But the image is not wide and complete
Can you make one that can 1MHz? I've heard it can do 14 mega sample per second. Can it be used it at 1MHz? Maybe using a another module for display so less pressure and fast response on main board?
i friend first thank you and what if i need to use it with 220v to 400v AC and DC
Hi. What's the lowest time/division this can achieve ? Ty.
In the schematic I can see a diode connected to 3.3V, is it the same 3.3V from STM32 board?
Also can you specify the voltage range that the oscilloscope can measure.
Yes, 3v3 from the board (STM32) . To protect the microcontroller, the input voltage must not be higher than 3.3V. For higher voltages a simple voltage divider should be added
i think you forgot the code for measuring the frequency.
How to make a simple 500 khz sound generator? Can u advice
3:22 No puedo identificar el componente que se encuentra atras, veo que lleva cableado al switch de encendido y a la placa de arduino, que componente es ?
Input Power female connector
Can I check 220v or 440v ac frequency wave .......plz reply...it will not damage if I check ac voltage
No, you cann not check 220 or 440 V AcC or DC
@@MirkoPavleskiMK What can we do for check 220 v or 400v
it can be made using Esp32-c3?
You can probably make 2. One running on each core.
Bro can you please send me the library names
It's upto 500khz not Mhz
My mistake in the video title
And in the Digikey article too
The misleading title slide says 500MHz, when it should say 500KHz.
My mistake , it is 500KHz
Sir make 2 chanel....😂😂
Technical videos should not have music of any type.
Which engineering textbook did you read that from?
Mute it bruh this shit is relaxing
can I have a compiled file? I'm not a big expert in Arduino and I constantly get errors