that's nice, there is one suggestion you can try to make it more realistic. You can make actual car system to control this cars using steering wheel, break, clutch, accelerator, and gearbox(forward, backward motion). You can use ESP now to communicate ...btw great job 🙌🙌
It’s a ESPNOW broadcast so you can add multiple receivers . If you need to use specific MAC address of receiver then you can add those many peers in transmitter 👍🏻👏🏻
I got a problem with the communication between the esp32's. I managed to get the code working but after making a few alterations to the motor directions (HIGH or LOW) and reuploading the code, i ran across an error that said fatal error. It managed to resolve itself. But now the robot is running without any inputs. When I open the Serial Monitor, I get: Last Packet Send Status: 1 Message Failed Sent with success This repeats over and over. Any idea as to why it's doing this?
What do you do with url code in one car esp32 a joystick trasmiter and a one esp32 one reciver board please explain url code link is for as note where it goes ?
Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically please help me sir Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊
Hi Brother I am very big fan to you, Can you please make a video about controlling a car with MIT App inventor that has esp32 camera video in the app and servo for pan and tilt,car controls in the app itself .plzzzzz dk video😢😢😢😢😢
@@hashincludeelectronics i jave tried you milli code got same results after some interval it keep calling calling function even when is data is recieving
@@hashincludeelectronics after more investigation i found problem is when the different becomes 0 it give some long value 2^32 i think which causing condition to true So i changed the condition to now>datarec + interval
C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino: In function 'void setUpPinModes()': C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino:128:3: error: 'ledcSetup' was not declared in this scope 128 | ledcSetup(rightMotorPWMSpeedChannel, PWMFreq, PWMResolution); | ^~~~~~~~~ C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino:130:3: error: 'ledcAttachPin' was not declared in this scope; did you mean 'ledcAttach'? 130 | ledcAttachPin(enableRightMotor, rightMotorPWMSpeedChannel); | ^~~~~~~~~~~~~ | ledcAttach Multiple libraries were found for "WiFi.h" Used: C:\Users\dhare\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.3\libraries\WiFi Not used: C:\Users\dhare\OneDrive\Documents\Arduino\libraries\WiFiNINA exit status 1 Compilation error: 'ledcSetup' was not declared in this scope im getting this error help
Please make video Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically please help me sir Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊
that's nice, there is one suggestion you can try to make it more realistic. You can make actual car system to control this cars using steering wheel, break, clutch, accelerator, and gearbox(forward, backward motion). You can use ESP now to communicate ...btw great job 🙌🙌
Thank you very much for nice comment . That’s a nice idea . 👍🏻👏🏻
Hi, I enjoy your channel. How would you code the transmitter for the second MAC address. Thanks.
It’s a ESPNOW broadcast so you can add multiple receivers . If you need to use specific MAC address of receiver then you can add those many peers in transmitter 👍🏻👏🏻
Hi pls make a video on how to make a dart shooter
Noted 👍🏻👏🏻
I got a problem with the communication between the esp32's. I managed to get the code working but after making a few alterations to the motor directions (HIGH or LOW) and reuploading the code, i ran across an error that said fatal error. It managed to resolve itself. But now the robot is running without any inputs. When I open the Serial Monitor, I get:
Last Packet Send Status: 1
Message Failed
Sent with success
This repeats over and over. Any idea as to why it's doing this?
May be there is some issue in programming . Please double check 👍🏻👏🏻also check the connections again .
We need 3in1 car like
1. Obstacle avoiding
2. Line following
3. Human following
In one car, please make this type of project
Good idea 👍🏻. Will try it 👍🏻👏🏻
What do you do with url code in one car esp32 a joystick trasmiter and a one esp32 one reciver board please explain url code link is for as note where it goes ?
Sorry I did not understand your question 👍🏻👏🏻
Please make a tutorial video for ds3231 rtc module
Pls made drone for college project
Nice idea 👍🏻👏🏻
bro can we use normal wheel in place of this macanum wheel
We have used normal wheels only . Please check the video 👍🏻👏🏻
Very good 😮
Thank you 🙏
Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically please help me sir
Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please
Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊
Will try to make one 👍🏻👏🏻
help the file to put Mac address in is a read-only so I can't put my esp32 Mac address in the code help please
You need to copy and paste the code from the link provided in the description and upload the code using Arduino IDE 👍🏻👏🏻
bro in gesture control car can we use normal wheel
Yes we can. However some of the movements will not work as those are for mecanum wheels only . You can try with normal wheels 👏🏻👍🏻
OK BRO
@@hashincludeelectronics
Hi Brother I am very big fan to you,
Can you please make a video about controlling a car with MIT App inventor that has esp32 camera video in the app and servo for pan and tilt,car controls in the app itself .plzzzzz dk video😢😢😢😢😢
There is already video on my channel for esp32 camera with pan tilt . Please check that 👍🏻👏🏻
bro can you please make video on car with remote where aurduino uno is used as transmiter and receiver
You can check my other videos using nrf transmitter receiver with Arduino . 👍🏻👏🏻
@@hashincludeelectronics can you suggest me video
@@PoojaSharma-uh4uj Arduino RC car using NRF24L01+ module with joystick
ruclips.net/video/9Iu-_cIXW-c/видео.html
thanks bro
@@hashincludeelectronics
Ur videos and information delivery very good brother super❤❤
Thank you very much 👍🏻👏🏻
What if sender hold joystick and cut power supply of sender board 👀
There is timeout of 1 second at receiver , so car will stop if there is no transmission from transmitter 👍🏻👏🏻
@@hashincludeelectronics i had done same logic but it always stopping for me
@@hashincludeelectronics i jave tried you milli code got same results after some interval it keep calling calling function even when is data is recieving
@@faizi2895 what do you mean ? I did not understand
@@hashincludeelectronics after more investigation i found problem is when the different becomes 0 it give some long value 2^32 i think which causing condition to true
So i changed the condition to
now>datarec + interval
Bro pleae help me I face error while make car with esp32 cam module please help me
What issue are you facing ?
I face error multiple time while coding I invest whole saving for this on your beleif only .so please help me @@hashincludeelectronics
bro why are you not help me
What’s issues are you facing ?
BRO WHILE CODING IT SHOW THAT FATAL AND NOT CONNECTED TO ESP32 IN ESP32 CAM MODULE PAN TILT CAR
@@hashincludeelectronics
C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino: In function 'void setUpPinModes()':
C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino:128:3: error: 'ledcSetup' was not declared in this scope
128 | ledcSetup(rightMotorPWMSpeedChannel, PWMFreq, PWMResolution);
| ^~~~~~~~~
C:\Users\dhare\OneDrive\Documents\Arduino\Receiver\sketch_aug4a\sketch_aug4a.ino:130:3: error: 'ledcAttachPin' was not declared in this scope; did you mean 'ledcAttach'?
130 | ledcAttachPin(enableRightMotor, rightMotorPWMSpeedChannel);
| ^~~~~~~~~~~~~
| ledcAttach
Multiple libraries were found for "WiFi.h"
Used: C:\Users\dhare\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.3\libraries\WiFi
Not used: C:\Users\dhare\OneDrive\Documents\Arduino\libraries\WiFiNINA
exit status 1
Compilation error: 'ledcSetup' was not declared in this scope
im getting this error help
@@kristandharel8064 please install 2.0.16 version of esp32 board 👍🏻👏🏻
Please make video
Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically
please help me sir
Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please
Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊